Wall Plates

Keystone Wall Plate with Mounting Screws

FireFold Keystone Wall Plates are compatible with any standard size keystone jack. They are made of durable ABS plastic for long life.

Available in a wide variety of colors and port configurations, these wall plates are quick and easy to install. Each plate comes complete with mounting screws.

Keep your cables organized and get a professional look.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Surface Mount Box 

When installing a wall plate isn't practical, these surface mounts will do the trick. They're convenient, simple, and help maintain that professional look.

The compact, space saving design is easy to install and accommodates any 110 style networking keystone jack. Each surface mount comes individually packaged with screws and padded dual sided tape.

Vanco Brush Bulk Cable Plate

This Bulk Cable Wall Plate from Vanco comes with a brush insert to help organize multiple cables. Provides a professional, finished look to your installation. Route your HDMI Cables and Audio/Video Cables for a home theater installation, or route network cables and VGA cables for a network Installation.

Vanco Keystone Plate Insert

This keystone insert fits into any decora-style wall plate for a stylish, professional look.

Houses your networking and home theater connectors to keep you organized.

Blank Keystone Jack Insert

This blank insert is used to cover up any extra holes in a keystone wall plate. It is constructed from molded plastic and is designed for snap-in installation. This insert helps block dust accumulation that would occur due to opened ports in a wall plate and hide unsightly holes.

ICC Keystone Wall Plate, Dual Station IDs

ICC’s Stationed ID Faceplates are equipped to support keystone jacks such as voice, data, video, and audio. Working through-out all work area locations. ICC faceplates are fitted to install connectivity. Ideal for installations such as conference rooms, computer labs, classrooms, and office cubicles. Designed with installation versatility these faceplates provide a professional appearance.

Vanco Slim Bulk Cable Wall Plate

Simplify your cable installation with the WP-SLIMBULK from Vanco. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The minimum clearance for this plate is 1-3/16” and it is wide enough to accommodate the head of a VGA cable. The low, flattened profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.

ICC Stainless Steel Keystone Wall Plate

The ICC Stainless Steel Wall Plate is a sleek, durable way to distribute voice, data and communications. It accommodates a variety of snap-in keystone jacks for quick, easy installation and mounts to any standard single gang outlet box.

DataComm Recessed Bulk Cable Plate

Use DataComm Electronics recessed low voltage cable plates to install low voltage cables behind your flat panel TV, your amplifier or other audio/video devices. These recessed bulk cable plates are designed to be used with low voltage mounting plate brackets by any major manufacturer.

The recessed low voltage cable plates can be installed upright or upside down. Install the 45-0001/2 upside down when installing flat panel TV’s.

Determine the location of your flat panel TV, amplifier or audio/video device. Cut a hole in the wall and install the low voltage mounting plate bracket. Then simply pull your cables through the mounted low voltage mounting plate bracket and then through the DataComm Electronics recessed low voltage cable plate. Insert the DataComm Electronics recessed low voltage cable plate into your mounted low voltage mounting plate bracket and secure tightly with the wall plate screws.

Slim Line Standard HDMI Pigtail Wall Plate

The standard HDMI wall plate with pigtail is a white decor style rectangular covering for a wall. It has 2 HDMI ports connected by a short cable. The port contacts are gold plated to resist corrosion and degradation. With a screw at the top and another at the bottom, this wall plate is installed the standard way.

This wall plate will help you organize and extend your HDMI devices. Running cables through the wall is one of the most common ways installers create their gorgeous and functional setups. There is one problem with most wall plates, however, and that is the angle of their HDMI port on the back. A pass-thru port will cause wear and tear to the connector of your HDMI cable if not angled in a way to reduce stress, the pigtail will remove this concern. With a flexible pigtail, you can angle your cable in a way that best serves your needs. Just like other HDMI wall plates, crystal clear, high-resolution signals are supported and audio and video is transmitted.

Vanco WPBWW Bulk Cable Wall Plate

Simplify your cable installation with Vanco’s WPBW. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The low 1-1/4” profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.

Keystone Plate - 8 or 12 Ports for Snap In Jacks

Create Custom Multimedia Wall Plates

No two installations are the same and you need the ability to customize your connections to meet your specific needs. Keystone plates are an easy and convenient way to create custom wall plates for your home theater or network setup. Get organization and functionality all in one solution.

Match Any Decor

This neutral white wall plate comes in either eight or twelve port configurations and are appropriate for both commercial and residential applications. The ports fit standard snap in keystone jacks and measure 14.6 x 16.2mm. Both the 8 port keystone wall plate and the 12 port keystone wall plate measure 70.5 x 115mm, fitting standard double gang wall boxes and low voltage brackets. They offer an elegant, finished look with included color matching screws.

100% Lifetime Guarantee

Rest assured you'll only get the highest quality keystone wall plates when you order from FireFold.com. These keystone jack wall plates come with the FireFold Signature Lifetime Warranty against manufacturer defects.

Package Includes

• (1) Keystone Wall Plate in your choice of 8 or 12 ports
• (4) Color Matching Screws

CAT5E Surface Mount Box - White & Ivory

When installing a wall plate isn't practical, these surface mounts will do the trick. They're convenient, simple, and help maintain that professional look.

The compact, space-saving design is easy to install and come installed with one or two Cat5E Keystone Jacks.

CAT6 Surface Mount Box With 2 Port - FireFold

When installing a wall plate isn't practical, these surface mounts will do the trick. They're convenient, simple, and help maintain that professional look.

The compact, space-saving design is easy to install and comes installed with 2 Cat6 Keystone Jacks. Each surface mount comes individually packaged with screws and padded dual sided tape.

CAT6 1 Port Surface Mount Box

When installing a wall plate isn't practical, these surface mounts will do the trick. They're convenient, simple, and help maintain that professional look.

The compact, space saving design is easy to install and come installed with 1 Cat6 Keystone Jack. Each surface mount comes individually packaged with screws and padded dual sided tape.

RJ45 Cat5E Junction Box - Cat5E Ethernet cables

A junction box acts just like an inline coupler and is used to connect two Cat5E Ethernet cables together. It is an affordable and easy alternative if you need to extend a cable that is too short and doesn’t care to run a new cable. Keep in mind that if you're going to join two wires together permanently, it's best to have as direct a connection as possible.

The punch-down connection provides secure continuity; you don’t have to worry about the connection being flimsy. You can use this junction box with unshielded twisted pair Cat5E cables. It’s also compatible with 110 and Krone punch down tools. FireFold’s junction boxes are easy to use, well-constructed and come with our Signature Lifetime Warranty which ensures that your purchase is free from manufacturer defects.

ICC Blank Modular Keystone Inserts

The ICC Blank Modular Keystone Inserts 10 Pack comes with 10 blank inserts, which can be used to fill empty ports on patch panels, surface mounts, and keystone plates. They allow a clean, organized installation with space reserved for future upgrades.

Quest Oversized Keystone Wall Plate, Single-Gang

Quest MIDI keystone single-gang wall plates are oversized wall plates (3.1"w x 4.8"h) designed for standard use, as well as for the purpose of hiding mistakes in incorrectly cut mounting holes in the sheetrock. Available in 0, 1, 2, 3, 4 & 6 port versions; are designed for vertical mounting on a wall; and are constructed for use with any standard keystone inserts.

Vanco White Decora Style Face Plate

Step Up to the Plate

Sometimes, when shopping for wall plates, you don’t find exactly what you’re looking for. It can be hard for manufacturers to offer every possibility- mainly because the possibilities are endless. One person may need coax, Ethernet, HDMI, and RCA while another wants nothing in the world more than a VGA, Optical, and RJ11 plate. Keystone plates are one option when it comes to custom wall plates, but they’re not the only choice you have. Decora wall plates were made famous by Leviton initially as a replacement for standard toggle light switches.

Decora the Halls

FireFold’s Decora-Style Face Plate can be used for the very same application, but they are also frequently used for low-voltage wiring. When combined with Decora inserts, the installer or homeowner can put together their ideal configuration. The WP-DECOR face plate has openings for the Decora insert of your choice. Inserts are available to accommodate between one and six keystone jacks each. We also offer a huge variety of home theater and networking keystone jacks that can be easily snapped into the insert ports. These plates follow industry standards, so they can be used with any inserts and keystones you already have.

Installing the WP-DECOR Decora-style face plate is simple. It fits over any standard low voltage bracket or box and attaches with the included color-matched screws. The smooth, glossy white finish helps it blend in easily with existing wall plates and décor, and the beveled edges ensure a clean and professional appearance. This plate is molded from dense, durable plastic and is backed by our signature lifetime warranty. Decora-style plates are also available from us with two and three insert openings.

Single Gang Junction Box 

On-Wall Plates

Not all walls are created equal, especially when it comes to installation projects. Sometimes location, building code, or materials prevent running wires in the wall. Brick and cement walls are especially challenging, but that doesn’t mean you’re out of options. With a surface mount box like the SINGLE-GANG, you can create a way to attach wall plates without having to cut into your wall. Any low voltage wall plate will work: keystone, speaker, decora, HDMI. Just attach the wall plate to this single gang box like you would any other low voltage bracket using the two machine-threaded screw casings.

The SINGLE-GANG is designed for surface use and is not meant to be recessed fully into the wall. It offers several points of access for running your cables to it and through it. There are two rectangular knock-outs for use with Raceway cable cover systems and a 1.25” opening for conduit. To affix this single gang box to a wall, floor, or other surface, there are several holes to accommodate screws, nails, or other hardware. The smooth plastic is not porous enough to accept latex-based paints, but this single gang surface mount box is also available in beige.

4 Port Surface Mount Box

When installing a wall plate isn't practical, these surface mounts will do the trick. They're convenient, simple, and help maintain that professional look.

The compact, space-saving design is easy to install and accommodates any 110 style networking keystone jack. Each surface mount comes individually packaged with screws and padded dual sided tape.

Arlington Nail On Low Voltage Mounting Bracket

LVN Bracket

Install your low voltage cables in a fraction of the time with the Arlington LVN Nail-On Mounting Bracket. The non-metallic, non-conductive, plastic construction makes them perfect for Class 2 networking and audio-video cabling runs. Designed for bare wood studs in new construction areas, these brackets come with a pair of angled captive nails and arrive ready to install. Simply tap the nails into the side of the exposed stud and you’re done.

They include a molded loop for tying off wires and a side tab for added stability. The unique side-fastening nail-in process also increases accuracy by decreasing pushback. The LVN low voltage mounting bracket is for use with standard wallplates and faceplates. These nail-in style boxes are also available in two, three, and four-gang configurations. They are UL listed and CSA rated for low voltage use and are not compatible with electrical wiring.

White RJ11 Phone Wall Plate available at FireFold

The RJ11WP-2-WHT is a two-port modular plate, used to terminate a telephone wire run at the wall. These plates are compatible with four-conductor Cat3 cables and feature dual RJ11/RJ12 connections on the front. The color-coded screw-style construction on the back makes installation simpler, requiring no guesswork or special tools for assembly. It is designed for use with a new or existing single-gang low voltage box or bracket and can be attached with the included pair of screws. With a smooth white scratch-resistant finish, these wall plates are perfect in a home or professional setting.

DataComm  1-3/4 Inch Hole Saw Plate

This two-by-two-inch wall plate is designed to conceal low voltage cables behind the smaller home theater and security equipment. The compact design mounts inside a 1-3/4 inch hole and features a 0.77 x 0.87-inch brush opening. Built-in wings enable mounting without the need for a low voltage mounting bracket. Simply tighten the screws into place for a secure hold.

White Blank Wall Plate

Into the Void

When it comes to home improvements, the sad- and sometimes frustrating- truth is that nothing is ever permanent. Floor plans shift, technology is updated, and tastes change. Regardless of whether your project has just started, just finished, or is stuck somewhere in between, maintaining a professional appearance is just as important as making life easier for yourself in the future. Wiring your home can be a messy project and it often leaves you with plenty of holes to cover. You’ve probably seen blank wall plates before and many people wonder what they are for. Wall plates are most often used to plug into in-wall wiring, but blank plates don’t have any openings. Why use one?

Fill in the Blank

Blank wall plates like FireFold’s WP-0 are used to cover the site of an old, unused connection, the site of a potential connection, or just the site of a hole left by construction. When time, effort, or future use is in question, blank wall plates provide an easy, inexpensive alternative to patching drywall. They create a clean, intentional look while keeping debris out of your stud bays. Which blank wall plate you need depends on your current décor and how large an opening you have to cover.

The WP-0 White Blank Plate is a white two-hole single-gang plate. Molded from UL listed impact resistant thermoplastic, this high-quality wall plate is solid and durable. It comes with a pair of color-matched screws and fits over any standard one-gang box or bracket. The smooth, glossy finish matches most wall plates and the beveled edges keep the WP-0 low-profile and inconspicuous. Installing this plate over an existing box takes seconds and requires only a screwdriver. Replacing it later with another single-gang wall plate is just as simple. With a lifetime warranty, you can expect this blank plate to last through endless projects.

Vanco 28146W Binding Post Decor Wall Plate

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-1P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and a black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to a bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with a single speaker. Installing and connecting the WP-1P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

Vanco Hinged Bulk Cable Wall Plate

Prepare for the unexpected with the 120617 bulk wall plate by Vanco. The patented design offers many advantages over a standard pass-through plate. A unique side-opening hinge allows the user to disconnect the top and bottom halves of this plate so it can be installed around a set of cables. This distinctive feature is especially useful when cables and equipment are already connected or when large connector ends such as VGA and DVI would ordinarily limit the number of cables that fit. The WP-HINGED attaches easily to any single gang low voltage box or bracket, and the pivoting joint requires no additional hardware. With a glossy, natural white shade, this bulk cable plate can create a professional look no matter the visibility.

Vertical Cable Ivory Surface Mount

This surface mount from Vertical Cable is a universal solution to mounting keystone jacks. It fits most Cat3, Cat5E, Cat6 and Cat6A jacks. The two-piece design houses a single or dual blank port, making it easy to snap in keystone jacks. It comes complete with double-sided tape, screws and cable ties for a complete solution.

Vanco Dual HDMI Pigtail Wall Plate

The standard HDMI wall plate with pigtail is a white decor style rectangular covering for a wall. It has dual HDMI cables. Each cable has 2 HDMI ports at either end. The port contacts are gold plated to resist corrosion and degradation. With a screw at the top and another at the bottom, this wall plate is installed the standard way.

This wall plate will help you organize and extend your HDMI devices. Running cables through the wall is one of the most common ways installers create their gorgeous and functional setups. There is one problem with most wall plates, however, and that is the angle of their HDMI port on the back. A pass-thru port will cause wear and tear to the connector of your HDMI cable if not angled in a way to reduce stress, the pigtail will remove this concern. With a flexible pigtail, you can angle your cable in a way that best serves your needs. Just like other HDMI wall plates, crystal clear, high-resolution signals are supported and audio and video is transmitted.

DataComm Bulk Cable Wall Plate with Flex

DataComm's patented flex bulk cable wall plate provides an easy and convenient way to organize your cables while keeping a clean look to your install. It allows you to pass low voltage cables through the wall, behind your flat panel TV, amp, or other audio/video devices.

The center of the cable plate is made of a flexible plastic, which allows you to pass multiple cables (up to six) through the plate. The attached mounting wings fit snugly against any wall up to 1" thick and eliminate the need for an additional low voltage bracket.

DataComm Décor Insert

Flex Cable Insert

DataComm’s 45-0016-WH Decor Insert is designed for use with Decor and Decora-style wall plates. These bulk inserts allow you to pull a variety of cables straight through at the beginning or end of a wire run, saving time and eliminating an extra connection at the wall. A sheet of thin flexible plastic conceals the cut-in opening and helps prevent dust and other debris from entering your stud bay. The star-style slit can easily accommodate up to four cables including HDMI, coax, and Ethernet. With a low profile and multiple angles of exit, the 45-0016-WH is great behind ultra-slim TV mounts, in entertainment closets, or anywhere else space is limited.

With a durable finish and a simple installation process, the 45-0016-WH is a versatile solution for networking and home theater cable runs. Decor wall plates come in two parts: the face plate and the insert. Using this system, you can mix and match inserts for the combination plate of your dreams. FireFold carries one, two, and three-gang Decora faceplates for use with this bulk pass-through as well as a wide variety of other inserts. To assemble, just attach this insert to your face plate then secure the face plate to a low voltage box or bracket.

Note: Decor faceplate sold separately.

Garvin LVP1 Gang Cable Plate Flex Opening

Make wire management quick and easy with this cable wall plate from Garvin Industries. The flexible opening allows routing of up to six cables, eliminating the need for wall connections and safely corralling cables while keeping the wall opening covered. The cable pass through wall plate features built-in wings, which attach securely to the back of the drywall. As these wings are molded into the plate, it requires no additional parts for installation.

Vanco WP-4P-BIND Binding Post Wall Plate 

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-4P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and a black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with four speakers. Installing and connecting the WP-4P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

• (1) Vanco 28148W 4 Pair Binding Post Decor Wall Plate
• (2) Color Matching Screws

Quest Wall Plate for Bulk Cables

Embrace versatility with the VHT, available from Quest. This bulk cable wall plate can be used at the beginning or end of an in-wall cabling run to create a clean, professional look without creating extra connections or requiring additional time. With a reversible opening, this plate can be changed from a traditional style to a recessed plate. The center spout section detaches with a little pressure so it can be flipped in seconds. Because the pass-through piece can be snapped into place after the wires have passed, the separation makes it easier to pull through cables with larger connectors. The VHT is compatible with any low voltage box or bracket and comes with a pair of matching screws.

Vanco WP-2P-BIND Binding Post Wall Plate

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-2P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along the seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with two speakers. Installing and connecting the WP-2P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor faceplate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

HDMI Connection Plate 1 Port With 4 Inch Pigtail Coupler

Create an elegant way to conceal HDMI cables in the wall with this 1 port HDMI connection plate. The white faceplate mounts easily to an single gang wall plate box or bracket. The HDMI port is created using a mounted female to female 8 inch pigtail coupler, which means ultimate flexibility in connecting cables behind the scenes. You won't have to worry about bending and breaking delicate plugs when making your connections behind the wall. The screw-mounted port stays securely in place.

This HDMI pigtail plate supports High Speed version 1.4. It comes with all mounting hardware, so there's no need to purchase separate screws, saving you time and money.

Vanco HDMI Pigtail 3.5mm Wall Plate

Behind the Curtain

Order is your personal pledge. Cleanliness, discipline, and organization are the foundation of your life. Your shirts are arranged by color and season, your pantry displays every label facing out, and you have long since alphabetized your Blu-ray collection. You are the envy of your less responsible brethren. If only they knew your cluttered little secret. Behind your impeccably polished television, your precisely calibrated speakers, and your immaculately stacked components lurks a threat to the very fabric of your meticulous existence. The cables once acquired to bring you joy and peace have turned on you. Years have transformed them into a twisted, jumbled tangle of disgrace. You must fix it before it’s too late!

Organize Chaos

Restore cable lawfulness with the WP-HDMI-3.5MM wall plate featuring an HDMI and a 3.5mm jack. The standard one-gang size and easy plug-in ports make running wires through your wall simple and attractive. This plate allows you to use the shortest mess-free cable lengths from your devices to the wall, making them easier to manage and hide. With gold-plated connectors and support for the latest high-definition resolutions, compatibility is of no concern. The lead-free HDMI pigtail is extremely flexible to help prevent any positional strain on the small pin connectors and it comes to you completely 3D-ready for seamless integration. The 3.5mm port can be used either for headphone-style stereo audio or for an IR extension connection.

Installing and connecting the WP-HDMI-3.5MM is straightforward and quick. This design offers multiple fitting options as well. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future. For basic installations, a drywall saw and a screwdriver are the only tools you will need. These plates do not require much clearance, so they are ideal for hiding behind equipment and televisions or anywhere else where space is an issue.

Garvin WBF-1 Low Volt Box Eliminator Ring

Help Eliminate Gangs

Limited wall room but need a wall plate? This product will eliminate the large gang box, allowing you to insert into any wall.

Saves Space

With the elimination of a standard gang box, you will be able to work with a deal more room. The blue (gang) box also makes cable management a hassle as thick, inflexible wire won't want to go back in properly. This leads to awkward angles that cause wear and tear and even a distortion in signal. Not all walls can support a regular gang box, and if you need an outlet in that particular place then you are essentially out of luck--unless of course you have one of these.

High-Performance Cat6 RJ45 Junction Box

A junction box acts just like an inline coupler and is used to connect two Cat6 Ethernet cables together. It is an affordable and easy alternative if you need to extend a cable that is too short and don’t care to run a new cable. Keep in mind that if you're going to join two wires together permanently, it's best to have as direct a connection as possible.

The punch down connection provides secure continuity; you don’t have to worry about the connection being flimsy. This junction box is compatible with 110 and Krone punch down tools. FireFold’s junction boxes are easy to use, well-constructed and come with our Signature Lifetime Warranty which ensures that your purchase is free from manufacturer defects.

Package Includes

• (1) CAT6 RJ45 Junction Box

F Coupler Wall Plate at FireFold

Standard size single-gang wall plate
Flush Mount
1 RG6 Connector
Mounting screws included

ICC Cable Feedthrough Blank Keystone Insert 10 Pack

The ICC IC107BN2WH Cable Feedthrough Blank Keystone Insert 10 Pack comes with 10 keystone plate inserts to feed a coaxial cable through a wall plate with a clean finish.

ICC Telephone Faceplate With 1 Port

DataComm 45-0021-WH Bulk Cable Plate

Use DataComm Electronics’ patented new recessed low voltage cable plate with recessed power to install power and low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The 45-0021 recessed low voltage cable plate with recessed power can be installed upright or upside down.

Use either a single gang retrofit work box or for new construction installations, use a new nail on box. Once you have wired the receptacle*, then begin by inserting the receptacle portion of the plate into the work box. Once the entire recessed plate is flush to the wall, using the two white screws supplied, screw the receptacle portion of the plate to the work box. Next, screw down the screws with wings. These wings will fasten tightly against the back of the drywall. Plug in all necessary video and audio cables. Install your flat panel TV mounting bracket per the flat panel TV bracket manufacturer’s instructions.

DataComm 45-0031-WH Bulk Cable Plate

DataComm Electronics' new, patented Recessed Low Voltage Media Plates offer the convenience of a duplex receptacle and a recessed plate with enough room to store the low voltage cables behind your flat panel TV.

DataComm 45-0008-WH Bulk Cable Plate

Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier, or other audio and video devices. The wall plate can be installed upright or upside down.

This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate in a single gang profile.

The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat-panel TVs.

Vertical Cable Stainless Steel Keystone Wall Plate