RJ-11 Adapters & Connectors

RJ11 Plug for Stranded Flat Wire

This is an RJ11 Plug for Stranded Flat Wire. These are designed for voice applications and most commonly used to terminate telephone lines. This connector contains gold-plated contacts and uses the 6 Position 4 Conductor wiring standard.

White RJ11 Phone Wall Plate available at FireFold

The RJ11WP-2-WHT is a two-port modular plate, used to terminate a telephone wire run at the wall. These plates are compatible with four-conductor Cat3 cables and feature dual RJ11/RJ12 connections on the front. The color-coded screw-style construction on the back makes installation simpler, requiring no guesswork or special tools for assembly. It is designed for use with a new or existing single-gang low voltage box or bracket and can be attached with the included pair of screws. With a smooth white scratch-resistant finish, these wall plates are perfect in a home or professional setting.

RJ11 Plug for Stranded Round Wire 100 Pack - FireFold

This is an RJ11 Plug for Stranded Round Wire. These are designed for voice applications and most commonly used to terminate telephone lines. This connector contains gold plated contacts and uses the 6 Position 4 Conductor wiring standard.

Platinum Tools EZ-RJ11/12 Connectors

Platinum Solutions

As anyone who has ever planned their network knows, terminating voice cables isn’t necessarily hard. It can be a tedious process, though, and it is critical to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100026B is a 100-pack of EZ-RJ11/12 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ crimp tool.

The Difference

The initial steps for adding an EZRJ11/12 connector onto a Cat3 cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ tool will crimp and cut away the extra wire all in one squeeze.

RJ11 Inline Modular Crossover Coupler - FireFold

Joining Forces

Welcome, everyone, to FireFold’s Coupler Corner where there is no such thing as “opposites attract!” This is the number one place like-minded cables can make a solid, lasting connection in a safe and professional environment. We know it can be hard to join two cables together. Whether you need to unite them for an hour or a lifetime, selecting just the right bond can be tough. It shouldn’t be a high-pressure race against time, though. With the right coupler, mating cables end to end is easy, reliable, and quick. Here you can find a coupler for a signal so solid you might forget those cables were ever separate. All of our couplers are small enough to tuck in your pocket and take on the move, so they’re even great for temporary arrangements.

Female to Female RJ11 Crossover

For connecting two male RJ11 connectors together, you can’t go wrong with the RJ11-COUPX-WHI. This professional coupler features two female RJ11 jacks. RJ11 ends are most commonly found as connections on Cat3 voice and data cables, so this is especially useful if you find your phone cord isn’t long enough and you don’t feel comfortable with splicing the wires. RJ11 Cat3 cables are also the primary line for DSL modems. This tiny adapter has a smooth white finish for inconspicuous installations and is specifically designed for crossover applications. Other couplers are available for those who need a straight-through configuration.

These RJ11 couplers can be used with any of FireFold’s Cat3 cables, splitters, or adapters for customized telephone solutions. In most cases, Cat3 cables can be run fairly long distances, so feel free to extend without worries. It doesn’t matter to us how long you plan for your cables to be joined, either. You can still enjoy our picture-perfect match of low prices and high performance. With our signature lifetime warranty, you can expect this coupler to create quality connections for as long as you both shall live.

RJ11 Inline Modular Coupler - FireFold

Joining Forces

Welcome, everyone, to FireFold’s Coupler Corner where there is no such thing as “opposites attract!” This is the number one place like-minded cables can make a solid, lasting connection in a safe and professional environment. We know it can be hard to join two cables together. Whether you need to unite them for an hour or a lifetime, selecting just the right bond can be tough. It shouldn’t be a high-pressure race against time, though. With the right coupler, mating cables end to end is easy, reliable, and quick. Here you can find a coupler for a signal so solid you might forget those cables were ever separate. All of our couplers are small enough to tuck in your pocket and take on the move, so they’re even great for temporary arrangements.

Female to Female RJ11

For connecting two male RJ11 connectors together, you can’t go wrong with the RJ11-COUP-WHI. This professional coupler features two female RJ11 jacks. RJ11 ends are most commonly found as connections on Cat3 voice and data cables, so this is especially useful if you find your phone cord isn’t long enough and you don’t feel comfortable with splicing the wires. RJ11 Cat3 cables are also the primary line for DSL modems. This tiny adapter has a smooth white finish for inconspicuous installations and is specifically designed for straight-through applications. Other couplers are available for those who need a crossover configuration.

These RJ11 couplers can be used with any of FireFold’s Cat3 cables, splitters, or adapters for customized telephone solutions. In most cases, Cat3 cables can be run fairly long distances, so feel free to extend without worries. It doesn’t matter to us how long you plan for your cables to be joined, either. You can still enjoy our picture-perfect match of low prices and high performance. With our signature lifetime warranty, you can expect this coupler to create quality connections for as long as you both shall live.

Platinum Tools 100026C Connectors 50pk - FireFold

Platinum Solutions

As anyone who has ever planned their own network knows, terminating voice cables isn’t necessarily hard. It can be a tedious process, though, and it is important to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100026C is a 50-pack of EZ-RJ11/12 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ crimp tool.

The Difference

The initial steps for adding an EZRJ11/12 connector onto a Cat3 cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can easily check to make sure the correct wire pin-out has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ tool will crimp and cut away the extra wire all in one squeeze.

Quest TBN-1003 UY Splice 100pk, Yellow - FireFold

If you ever find your back to the wiring wall, failure is not an option. To ensure success, we suggest you arm yourself with these TBN-1003 UY IDC Splice Connectors from Quest. With this 100-pack in your back pocket, those wires won’t even know what hit them.

IDC stands for “insulation displacement connector,” and these stay right where they belong. These connectors can house two 22-26 AWG solid copper wires, and there’s no need to purchase extra tools. That pair of pliers you already own? Those’ll do just fine although there are specialized tools that provide more even pressure. Installing IDC connectors are lightning fast. There’s no stripping or prep needed. These connectors have teeth- literally. You just insert your wires and put the squeeze on the barrel. It’s lined with a metal plate that will pierce through the wire insulation for the conductivity you need and an iron grip. Outdoor environments are nothing to these, either. They’re filled with a protective silicone gel to keep out pesky moisture and fend off corrosion. So, go on. Splice in your house, at the office, or in your basement… No one ever has to know.

Quest TBN-1002 UR-3 Splice 19-26AWG 100pk

If you ever find your back to the wiring wall, failure is not an option. To ensure success, we suggest you arm yourself with these TBN-1002 UR-3 IDC Splice Connectors from Quest. With this 100-pack in your back pocket, those wires won’t even know what hit them.

IDC stands for “insulation displacement connector,” and these stay right where they belong. These connectors can house two or three 19-26 AWG solid copper wires, and there’s no need to purchase extra tools. That pair of pliers you already own? Those’ll do just fine although there are specialized tools that provide more even pressure. Installing IDC connectors is lightning fast. There’s no stripping or prep needed. These connectors have teeth- literally. You just insert your wires and put the squeeze on the barrel. It’s lined with a metal plate that will pierce through the wire insulation for the conductivity you need and an iron grip. Outdoor environments are nothing to these, either. They’re filled with a protective silicone gel to keep out pesky moisture and fend off corrosion. So, go on. Splice in your house, at the office, or in your basement… No one ever has to know.

Quest UG-3 Splice 19-26AWG Connectors

If you ever find your back to the wiring wall, failure is not an option. To ensure success, we suggest you arm yourself with these TBN-1004 UG-3 IDC Splice Connectors from Quest. With this 100-pack in your back pocket, those wires won’t even know what hit them.

IDC stands for “insulation displacement connector,” and these stay right where they belong. These connectors can house two or three 19-26 AWG solid copper wires, and there’s no need to purchase extra tools. That pair of pliers you already own? Those’ll do just fine although there are specialized tools that provide more even pressure. Installing IDC connectors is lightning fast. There’s no stripping or prep needed. These connectors have teeth- literally. You just insert your wires and put the squeeze on the barrel. It’s lined with a metal plate that will pierce through the wire insulation for the conductivity you need and an iron grip. Outdoor environments are nothing to these, either. They’re filled with a protective silicone gel to keep out pesky moisture and fend off corrosion. So, go on. Splice in your house, at the office, or in your basement… No one ever has to know.

RJ11 Modular T1 Plug to 2 Jacks - FireFold

This is an RJ11 Male to Dual Female T adapter designed to connector two modular cables to a single cable. These adapters are designed for voice and telephone applications.

RJ11 Modular T1 Jack to 2 Jacks - FireFold

This is an RJ11 Female to Dual Female T adapter designed to connector two modular cables to a single cable. These adapters are designed for voice and telephone applications.

Quest B Connector Wire Splice - 100 Pack

If you ever find your back to the wiring wall, failure is not an option. To ensure success, we suggest you arm yourself with these TBN-1011 B-Connectors from Quest. With this 100-pack in your back pocket, those wires won’t even know what hit them.

We’ve heard them called “beans” or “beanies,” but they’re more than hot air. These crimp-style connectors can house up to four 19-26 AWG solid copper wires, and don’t let the word “crimp” give you second thoughts. There’s no need to purchase extra tools. That pair of pliers you already own? Those’ll do just fine. Installing B-connectors is lightning fast. There’s no stripping or prep needed. These connectors have teeth- literally. You just insert your wires and put the squeeze on the barrel. It’s lined with tons of tiny razor-sharp bits of metal that will pierce through the wire insulation for the conductivity you need and an iron grip. Outdoor environments are nothing to these, either. They’re filled with a non-curing sealant to keep out pesky moisture. So, go on. Splice in your house, at the office, or in your basement… No one ever has to know.

Vertical Cable RJ11 Modular Plug | For Round Solid/Stranded CAT3 Telephone Cable (4C) - 100 pack

Vertical Cable Category 3, RJ11 Modular, 6P 4C, 50 Micro-Inches Gold Plated.

UY2 2-Port Telephone Splice Connector (Pack of 25)

Designed to splice two wires together quickly and easily, these splice connectors are perfect for splicing 22-26 AWG (0.64 - 0.40 mm) telephone wires.

UR 3-Port Telephone Splice Connector (Pack of 25)

Designed to splice three wires together quickly and easily, these splice connectors are perfect for splicing 19-26 AWG (0.91 - 0.40 mm) telephone wires.

RJ11 Pass-Through Connectors (Pack of 100)

The Jonard Tools RJ11 Pass-Through Connectors are used by network installers/technicians in order to terminate telephone cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating flat or round telephone cable or even replacing an existing connector (CAT3 or other similar).

Picabond Connector, Green, (Box of 1000)

Designed for splicing multi-conductor telephone cable, these connectors provide a lightweight and compact solution for splicing solid core wire.

RJ11 Phone Wall Plate, Beige