Rhino Brackets Wall Mount Bracket for LCD LED Plasma - 10 to 25 Inch Screens
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Fits VESA hole patterns 75x75 and 100x100
- Holds most monitors up to 25"
- Suitable for weights up to 44lbs
- 12 degree tilt and 30 degree swivel
- Comes with mounting hardware
- FireFold Signature Lifetime Warranty
- Specs+
- Fits Most 13-25" Flat Panel Monitors/TVs
- VESA 75x75, 100x100 Compliant
- 12 Degree Downward Tilt
- 30 Degree Swivel Left or Right
- Extends 60mm From Wall
- Maximum Load Capacity 44lbs (20kg)
- RoHS Compliant
- GS Approved
- Color: Black
- INSTALLATION INSTRUCTIONS
- Package Contents+
- (1) Wall Mount
- (4) M4x12mm Screws
- (4) M5x12mm Screws
- (4) M5 Washers
- (4) Spacers
- (2) Concrete Anchors
- (1) Instruction Manual
- Reviews+
- Q&A+
- Fits VESA hole patterns 75x75 and 100x100
- Holds most monitors up to 25"
- Suitable for weights up to 44lbs
- 12 degree tilt and 30 degree swivel
- Comes with mounting hardware
- FireFold Signature Lifetime Warranty
- Fits Most 13-25" Flat Panel Monitors/TVs
- VESA 75x75, 100x100 Compliant
- 12 Degree Downward Tilt
- 30 Degree Swivel Left or Right
- Extends 60mm From Wall
- Maximum Load Capacity 44lbs (20kg)
- RoHS Compliant
- GS Approved
- Color: Black
- INSTALLATION INSTRUCTIONS
- (1) Wall Mount
- (4) M4x12mm Screws
- (4) M5x12mm Screws
- (4) M5 Washers
- (4) Spacers
- (2) Concrete Anchors
- (1) Instruction Manual
Small Talk
As a wise old man once taught us all, sometimes the mightiest things come in small packages. Don’t be fooled by the size of the WM-1325-FM monitor mount. It is just as grand as many of its larger, beefier brethren. The compact design makes it easier to install, eliminating the fear, anger, and hate of the classic do-it-yourself project. The single mounting bar means you only have to find one stud and the lightweight design gives you the option to complete the job solo. A 12 degree downward tilt and 30 degree swivel gives you some flexibility once installed without adding bulk behind the screen. This mount can hold most monitors and small televisions up to 25” and 44 lbs. It may be capable of supporting larger screens, just check the weight and mounting hole patterns.
The Hole Story
The WM-1325-FM can fit VESA mounting patterns 75x75 and 100x100. But what does that mean? How do you know if it will fit your screen? It’s easy if you have your manual, a measuring tape, or the internet! Since you’ve obviously got web access, we’ll start with the latter. A quick query of the search engine of your choice can usually answer your question for you. Just be sure you have your monitor or TV’s exact model number as many manufacturers switch their mounting patterns from year to year. The VESA pattern should also be listed in the specs of your manual. If you don’t have the manual and can’t find the model number, or if you prefer to take a hands-on approach, you can calculate your VESA pattern yourself. Using a tape measure or ruler, measure the distance between the mounting holes on the back of the screen. Measure horizontally and vertically, not diagonally. There should be two numbers, both in millimeters. These numbers will be your VESA pattern.
Will this fit my monitor?
This will fit most 10-25" screens. Please make sure your monitor's mounting pattern is 100x100 or smaller and it weighs 40 lbs or less.
How far can this pull out from the wall?
This does not extend from the wall.
Will I need anything else?
You may need additional hardware if your TV uses a different screw size or if you are mounting to anything other than studs. You will also want an electric screwdriver with a drill bit and a stud finder. A drop cloth to cover your carpet or furniture may help, and a separate level can be a good idea as well.
What is a VESA pattern?
VESA pattern is the mounting pattern. There are several different sizes used by manufacturers. It is the measurement between mounting holes side to size and then up and down. This measurement will always be in millimeters.
Does this tilt or swivel?
This mount will tilt and swivel but it will not pull out from the wall.
Can you mount this on brick, plaster, or stone?
This mounting kit includes hardware to mount on drywall over studs and concrete. With special tools and hardware, you may be able to mount on other surfaces. Please consult an installation professional if you are unsure about how to mount in your home.
Small Talk
As a wise old man once taught us all, sometimes the mightiest things come in small packages. Don’t be fooled by the size of the WM-1325-FM monitor mount. It is just as grand as many of its larger, beefier brethren. The compact design makes it easier to install, eliminating the fear, anger, and hate of the classic do-it-yourself project. The single mounting bar means you only have to find one stud and the lightweight design gives you the option to complete the job solo. A 12 degree downward tilt and 30 degree swivel gives you some flexibility once installed without adding bulk behind the screen. This mount can hold most monitors and small televisions up to 25” and 44 lbs. It may be capable of supporting larger screens, just check the weight and mounting hole patterns.
The Hole Story
The WM-1325-FM can fit VESA mounting patterns 75x75 and 100x100. But what does that mean? How do you know if it will fit your screen? It’s easy if you have your manual, a measuring tape, or the internet! Since you’ve obviously got web access, we’ll start with the latter. A quick query of the search engine of your choice can usually answer your question for you. Just be sure you have your monitor or TV’s exact model number as many manufacturers switch their mounting patterns from year to year. The VESA pattern should also be listed in the specs of your manual. If you don’t have the manual and can’t find the model number, or if you prefer to take a hands-on approach, you can calculate your VESA pattern yourself. Using a tape measure or ruler, measure the distance between the mounting holes on the back of the screen. Measure horizontally and vertically, not diagonally. There should be two numbers, both in millimeters. These numbers will be your VESA pattern.
Will this fit my monitor?
This will fit most 10-25" screens. Please make sure your monitor's mounting pattern is 100x100 or smaller and it weighs 40 lbs or less.
How far can this pull out from the wall?
This does not extend from the wall.
Will I need anything else?
You may need additional hardware if your TV uses a different screw size or if you are mounting to anything other than studs. You will also want an electric screwdriver with a drill bit and a stud finder. A drop cloth to cover your carpet or furniture may help, and a separate level can be a good idea as well.
What is a VESA pattern?
VESA pattern is the mounting pattern. There are several different sizes used by manufacturers. It is the measurement between mounting holes side to size and then up and down. This measurement will always be in millimeters.
Does this tilt or swivel?
This mount will tilt and swivel but it will not pull out from the wall.
Can you mount this on brick, plaster, or stone?
This mounting kit includes hardware to mount on drywall over studs and concrete. With special tools and hardware, you may be able to mount on other surfaces. Please consult an installation professional if you are unsure about how to mount in your home.