Cat5E RJ45 10/100 Type 7 Base-T Pigtail Ethernet Splitter
SKU#: CAT5ESPLITTER
UPC#:704438119616
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Supports network speeds up to 100 Mbps
- Splits one Ethernet Female port into two female ports
- High Quality Category 5e
- Can be used with both Straight cable and Crossover Cable connections.
- FireFold Signature Lifetime Warranty
- Specs+
- 10/100 BaseT RJ45 Plug to 2Jack Pair Split Adapter
- Dimensions: 67 x 37 x 23mm
- Cable Length: 0.5ft
- Passive splitter
- Plug and play operation
- Supports network speeds up to 100 Mbps
- 2 Adapters are required to split a single line
- Reviews+
- Supports network speeds up to 100 Mbps
- Splits one Ethernet Female port into two female ports
- High Quality Category 5e
- Can be used with both Straight cable and Crossover Cable connections.
- FireFold Signature Lifetime Warranty
- 10/100 BaseT RJ45 Plug to 2Jack Pair Split Adapter
- Dimensions: 67 x 37 x 23mm
- Cable Length: 0.5ft
- Passive splitter
- Plug and play operation
- Supports network speeds up to 100 Mbps
- 2 Adapters are required to split a single line
Type 7 Cat53 RJ45 Pigtail Cable Splitter
The Type 7 Cat5E RJ45 Pigtail Cable Splitter is designed to separate the 4-pair configuration into two 2-pair sets. This allows you to operate two devices over a single Cat5e cable to prevent having to run another wire. To function correctly, each network-capable device you use requires its own IP address. This includes computers, mobile devices, printer, VoIP phones, and many other home and office essentials. Using a splitter improperly can cause many performance issues including unreliable or slow connections. To avoid this problem, you will need two of the CAT5ESPLITTER splitters.
To use a Cat5E splitter, you connect two cables from your router or switch to one splitter then attach your splitter to the single Ethernet run. Then, on the other side of the run, you connect your second Ethernet splitter and then run two cables to each device. There are several wiring variations available for Cat5e splitters, but type 04 is the most commonly used. Even though Ethernet splitters will allow you to connect two devices to one wire, it is still advised that only one device be used at a time.
Please note: this splitter is designed specifically for use with Ethernet phones and cannot split all Internet devices. Each device connected to this splitter must be able to operate on a unique IP address for it to function properly. Many devices are unable to do this. In this case, you would need to use a network switch.
Type 7 Cat53 RJ45 Pigtail Cable Splitter
The Type 7 Cat5E RJ45 Pigtail Cable Splitter is designed to separate the 4-pair configuration into two 2-pair sets. This allows you to operate two devices over a single Cat5e cable to prevent having to run another wire. To function correctly, each network-capable device you use requires its own IP address. This includes computers, mobile devices, printer, VoIP phones, and many other home and office essentials. Using a splitter improperly can cause many performance issues including unreliable or slow connections. To avoid this problem, you will need two of the CAT5ESPLITTER splitters.
To use a Cat5E splitter, you connect two cables from your router or switch to one splitter then attach your splitter to the single Ethernet run. Then, on the other side of the run, you connect your second Ethernet splitter and then run two cables to each device. There are several wiring variations available for Cat5e splitters, but type 04 is the most commonly used. Even though Ethernet splitters will allow you to connect two devices to one wire, it is still advised that only one device be used at a time.
Please note: this splitter is designed specifically for use with Ethernet phones and cannot split all Internet devices. Each device connected to this splitter must be able to operate on a unique IP address for it to function properly. Many devices are unable to do this. In this case, you would need to use a network switch.
