Cat5E Ethernet Patch Cable - Red
SKU#: C5EMB-0.5-RED
UPC#:704438103899
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Category-5E Patch Cord with Boot & Protector
- 350MHz High-Performance Patch Cord
- CM Rated PVC Jacket
- 24AWG 4 pair
- Stranded Bare Copper Conductors
- Exceeds ANSI EIA/TIA 568 B.2-10
- Unshielded RJ45 Modular Plugs
- 8P8C Gold Plated Pins 50U”
- 568B Wiring Color Code
- UL Listed, RoHS Compliant
- 350MHz Category 5E Network Patch Cable
- 50 Micron Gold Plated RJ-45 Connectors
- 24 AWG Stranded Pure Copper Conductors
- Meets or Exceeds TIA/EIA-568 Standard
- 350MHz Category 5E Network Patch Cable
- 50 Micron Gold Plated RJ-45 Connectors
- 24 AWG Stranded Pure Copper Conductors
- Meets or Exceeds TIA/EIA-568 Standard
- Specs+
- Conductor Size: 24AWG Stranded
- Conductor Material: Bare Copper
- Jacker Material: Flame Retardant PVC
- Jacket Diameter: 5.4±0.2mm
- 8P/8C Gold Plated 50U" RJ45 Connectors
- RoHS Compliant
- Min. 5000 MΩ KM Insulation Resistance
- Max. 9.38 Ω/100m Conductor Resistance
- UL cUL Listed, ETL / 3P Certified ANSI/TIA-568-C.2 Category 5e standards.
- 50 Micron Gold Plated Short Body RJ-45 Connectors
- 4 UTP 24 AWG Stranded Pure Copper Conductors
- CM Type PVC Jacket
- Molded Strain Relief Boot
- Meets or Exceeds TIA/EIA-568 Standard
- UL Listed
- RoHS Compliant
- 50 Micron Gold Plated Short Body RJ45 Connectors
- Constructed of 4 UTP 24 AWG Stranded Pure Copper Wire
- CM Type PVC Jacket
- UL/cUL Listed
- Meet or Exceed TIA/EIA-568 Standard
- RoHS Compliant
- Reviews+
- Q&A+
- Category-5E Patch Cord with Boot & Protector
- 350MHz High-Performance Patch Cord
- CM Rated PVC Jacket
- 24AWG 4 pair
- Stranded Bare Copper Conductors
- Exceeds ANSI EIA/TIA 568 B.2-10
- Unshielded RJ45 Modular Plugs
- 8P8C Gold Plated Pins 50U”
- 568B Wiring Color Code
- UL Listed, RoHS Compliant
- 350MHz Category 5E Network Patch Cable
- 50 Micron Gold Plated RJ-45 Connectors
- 24 AWG Stranded Pure Copper Conductors
- Meets or Exceeds TIA/EIA-568 Standard
- 350MHz Category 5E Network Patch Cable
- 50 Micron Gold Plated RJ-45 Connectors
- 24 AWG Stranded Pure Copper Conductors
- Meets or Exceeds TIA/EIA-568 Standard
- Conductor Size: 24AWG Stranded
- Conductor Material: Bare Copper
- Jacker Material: Flame Retardant PVC
- Jacket Diameter: 5.4±0.2mm
- 8P/8C Gold Plated 50U" RJ45 Connectors
- RoHS Compliant
- Min. 5000 MΩ KM Insulation Resistance
- Max. 9.38 Ω/100m Conductor Resistance
- UL cUL Listed, ETL / 3P Certified ANSI/TIA-568-C.2 Category 5e standards.
- 50 Micron Gold Plated Short Body RJ-45 Connectors
- 4 UTP 24 AWG Stranded Pure Copper Conductors
- CM Type PVC Jacket
- Molded Strain Relief Boot
- Meets or Exceeds TIA/EIA-568 Standard
- UL Listed
- RoHS Compliant
- 50 Micron Gold Plated Short Body RJ45 Connectors
- Constructed of 4 UTP 24 AWG Stranded Pure Copper Wire
- CM Type PVC Jacket
- UL/cUL Listed
- Meet or Exceed TIA/EIA-568 Standard
- RoHS Compliant
CAT5e Ethernet Patch Cable Snagless in Red, RJ45, M/M
The Enhanced Performance You Need When It Couldn't Be More Important
Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.
When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.
For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.
But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.
The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.
As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.
Cat5E Ferrari Boot
Cat5E Half-Moon Boot
Cat5E No Boot
Ferrari Boot
Half-Moon Boot
No Boot
What are these used for?
Ethernet patch cables are used to create a direct link from a device to a router or an ethernet switch.
What speed does this support?
Cat5e supports speeds of up to 1000 Mbps.
What boot type do I need?
Functionally, the boot type does not matter. It is a matter of personal preference. However, if you are planning on plugging and unplugging the cable frequently, we recommend non booted.
What length do I need?
That depends on your application. The maximum length of a patch cable without running into any degradation of signal loss is 328 feet.
Are these types UL listed?
Yes, we have UL listed patch cables.
Can I run these outside?
You can run them outside, however we recommend getting outdoor rated cable so you won't experience degradation due to the exposure of the elements.
How many times can you couple?
Using several couplers can degrade the signal so if you need to connect more than one cable, you should consider just using a longer length patch cable.
Can I use Cat5 cable with Cat6 Jacks?
You can use Cat6 jacks with a Cat5e cable, but you will only get Cat5e speeds.
CAT5e Ethernet Patch Cable Snagless in Red, RJ45, M/M
The Enhanced Performance You Need When It Couldn't Be More Important
Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.
When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.
For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.
But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.
The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.
As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.
Cat5E Ferrari Boot
Cat5E Half-Moon Boot
Cat5E No Boot
Ferrari Boot
Half-Moon Boot
No Boot
What are these used for?
Ethernet patch cables are used to create a direct link from a device to a router or an ethernet switch.
What speed does this support?
Cat5e supports speeds of up to 1000 Mbps.
What boot type do I need?
Functionally, the boot type does not matter. It is a matter of personal preference. However, if you are planning on plugging and unplugging the cable frequently, we recommend non booted.
What length do I need?
That depends on your application. The maximum length of a patch cable without running into any degradation of signal loss is 328 feet.
Are these types UL listed?
Yes, we have UL listed patch cables.
Can I run these outside?
You can run them outside, however we recommend getting outdoor rated cable so you won't experience degradation due to the exposure of the elements.
How many times can you couple?
Using several couplers can degrade the signal so if you need to connect more than one cable, you should consider just using a longer length patch cable.
Can I use Cat5 cable with Cat6 Jacks?
You can use Cat6 jacks with a Cat5e cable, but you will only get Cat5e speeds.
