Rhino Brackets Tilt TV Wall Bracket with In-Wall Wire Hider Kit for 32-55 Inch Screens
SKU#: LP34RB-44T-KIT
UPC#:790910482613
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- ALL-IN-ONE. Get everything you need to hang your TV and hide your cables in one kit. Just add tools.
- EASY TO INSTALL. With no scary electrical wiring required, this makes a great DIY project.
- CLEAN, PROFESSIONAL LOOK. Hide wires in the wall like the pros. Nothing to see here, folks.
- FIREFOLD SIGNATURE LIFETIME WARRANTY. Years of trouble-free performance lie ahead.
- FREE SHIPPING. Free economy shipping anywhere in the continental US. Doesn't get any better than this!
- Super Slim Low Profile Design Protrudes Less Than 1" from Wall
- Open Architecture for Extra Ventilation and Easy Wiring Access
- Up to 14 Degrees Downward Tilt for Premium Viewing Angle
- Included Bubble Level for Guaranteed Accuracy
- Specs+
- Material: Steel
- Thickness: 1.5mm
- Finish: Powder Coat
- Dimensions: 25 x 479 x 435 mm
- Compatibility: 32-55" Flat Panel Screens
- Installation: Solid Wall, Double Stud
- Weight Capacity: 77 lbs
- Max Hole Pattern: 425 x 410mm
- VESA Compatibility: 200x200, 400x200, 300x300, 400x400
- Tilt: -14°~0°
- Profile: 25mm
- Bubble Level
- Color: Black
- Package Contents+
- (1) Rhino Brackets Tilt TV Wall Mount
- (2) Garvin Recessed Low Voltage Cable Plates
- (2) Arlington Low Voltage Brackets
- (1) NetStrand 15ft HDMI 2.0 Cable
- (1) Bubble Level
- (4) M6x30 Bolts
- (4) M8x30 Bolts
- (4) D8 Washers
- (4) Large Spacers
- (5) ST6.3x55 Screws
- (5) Concrete Anchors
- (5) D6 Washers
- Reviews+
- Q&A+
- ALL-IN-ONE. Get everything you need to hang your TV and hide your cables in one kit. Just add tools.
- EASY TO INSTALL. With no scary electrical wiring required, this makes a great DIY project.
- CLEAN, PROFESSIONAL LOOK. Hide wires in the wall like the pros. Nothing to see here, folks.
- FIREFOLD SIGNATURE LIFETIME WARRANTY. Years of trouble-free performance lie ahead.
- FREE SHIPPING. Free economy shipping anywhere in the continental US. Doesn't get any better than this!
- Super Slim Low Profile Design Protrudes Less Than 1" from Wall
- Open Architecture for Extra Ventilation and Easy Wiring Access
- Up to 14 Degrees Downward Tilt for Premium Viewing Angle
- Included Bubble Level for Guaranteed Accuracy
- Material: Steel
- Thickness: 1.5mm
- Finish: Powder Coat
- Dimensions: 25 x 479 x 435 mm
- Compatibility: 32-55" Flat Panel Screens
- Installation: Solid Wall, Double Stud
- Weight Capacity: 77 lbs
- Max Hole Pattern: 425 x 410mm
- VESA Compatibility: 200x200, 400x200, 300x300, 400x400
- Tilt: -14°~0°
- Profile: 25mm
- Bubble Level
- Color: Black
- (1) Rhino Brackets Tilt TV Wall Mount
- (2) Garvin Recessed Low Voltage Cable Plates
- (2) Arlington Low Voltage Brackets
- (1) NetStrand 15ft HDMI 2.0 Cable
- (1) Bubble Level
- (4) M6x30 Bolts
- (4) M8x30 Bolts
- (4) D8 Washers
- (4) Large Spacers
- (5) ST6.3x55 Screws
- (5) Concrete Anchors
- (5) D6 Washers
Rhino Brackets Tilt TV Wall Bracket with In-Wall Wire Hider Kit for 32-55 Inch Screens
Low profile simplicity meets functionality in this tilt wall mount bracket from Rhino Brackets. This TV wall mount is designed for flat panel screens measuring 32 to 55 inches and weighing up to 77 pounds. The open architecture of this TV bracket leads to increased ventilation to increase the longevity of your TV components, as well as easy access for wiring during installation. It tilts up to fourteen degrees downward, allowing you to achieve the optimal viewing angle.
The included bubble level guarantees accuracy and a nice, even hang without the need for extra measuring tools. When mounted, it sits less than one inch (25mm) from the wall for a minimum footprint.
A DIY Dream
You're strong, independent, and you want to knock this TV hang out in a weekend, right? This TV wall mount kit is the perfect all-in-one solution for the do-it-yourselfer who's on a budget and a mission. All the components of a professional TV mounting job are included - just add tools and you're in business!
This kit includes our best-selling Rhino Brackets tilt TV wall mount for 32-55 inch flat screens. The low profile design keeps the TV close to the wall and out of your way, but it can be tilted forward up to 14 degrees to achieve the ideal viewing angle.
Out of Sight, Out of Mind
Hide those unsightly cables with the included Arlington low voltage brackets and Garvin recessed low voltage cable plates. The brackets attach securely to drywall with screw-down clamps, while the bulk cable plates screw directly onto the brackets and offer a convenient cable pass through. There is a fifteen foot NetStrand High Speed HDMI 2.0 cable included, but you can run your other low-voltage cables along with it.
What You'll Need
All the components are included in the kit, but you will need some tools. A convenient bubble level comes with the mount, but you will need a screwdriver, pencil for marking off your wall plate cuts, and a drywall saw or utility knife to cut openings for your low voltage brackets. A drill might also come in handy.
Will this fit my TV?
This will fit most 32-55" TVs. It may also hold larger or smaller TVs. Please make sure your TV's mounting pattern is 400x400 or smaller and your TV weighs 77 lbs or less.
Will I need anything else?
You may need additional hardware if your TV uses a different screw size or if you are mounting to anything other than studs. You will also want an electric screwdriver with a drill bit and a stud finder. A drop cloth to cover your carpet or furniture may help, and a separate level can be a good idea as well.
What is a VESA pattern?
VESA pattern is the mounting pattern. There are several different sizes used by manufacturers. It is the measurement between mounting holes side to size and then up and down. This measurement will always be in millimeters.
What are the dimensions on the mount?
The base is 18.9 inches wide and 8.1 inches tall. The arms are 17.1 inches long.
Does this tilt or swivel?
This mount can be used flat or tilted down.
Can you mount this on brick, plaster, or stone?
This mounting kit includes hardware to mount on drywall over studs and concrete. With special tools and hardware, you may be able to mount on other surfaces. Please consult an installation professional if you are unsure about how to mount in your home.
Will this work with a curved TV?
Yes, it will. It comes with a variety of spacers to accommodate for a curve.
How far away from the wall does this sit?
This sits approximately one inch from the wall.
Rhino Brackets Tilt TV Wall Bracket with In-Wall Wire Hider Kit for 32-55 Inch Screens
Low profile simplicity meets functionality in this tilt wall mount bracket from Rhino Brackets. This TV wall mount is designed for flat panel screens measuring 32 to 55 inches and weighing up to 77 pounds. The open architecture of this TV bracket leads to increased ventilation to increase the longevity of your TV components, as well as easy access for wiring during installation. It tilts up to fourteen degrees downward, allowing you to achieve the optimal viewing angle.
The included bubble level guarantees accuracy and a nice, even hang without the need for extra measuring tools. When mounted, it sits less than one inch (25mm) from the wall for a minimum footprint.
A DIY Dream
You're strong, independent, and you want to knock this TV hang out in a weekend, right? This TV wall mount kit is the perfect all-in-one solution for the do-it-yourselfer who's on a budget and a mission. All the components of a professional TV mounting job are included - just add tools and you're in business!
This kit includes our best-selling Rhino Brackets tilt TV wall mount for 32-55 inch flat screens. The low profile design keeps the TV close to the wall and out of your way, but it can be tilted forward up to 14 degrees to achieve the ideal viewing angle.
Out of Sight, Out of Mind
Hide those unsightly cables with the included Arlington low voltage brackets and Garvin recessed low voltage cable plates. The brackets attach securely to drywall with screw-down clamps, while the bulk cable plates screw directly onto the brackets and offer a convenient cable pass through. There is a fifteen foot NetStrand High Speed HDMI 2.0 cable included, but you can run your other low-voltage cables along with it.
What You'll Need
All the components are included in the kit, but you will need some tools. A convenient bubble level comes with the mount, but you will need a screwdriver, pencil for marking off your wall plate cuts, and a drywall saw or utility knife to cut openings for your low voltage brackets. A drill might also come in handy.
Will this fit my TV?
This will fit most 32-55" TVs. It may also hold larger or smaller TVs. Please make sure your TV's mounting pattern is 400x400 or smaller and your TV weighs 77 lbs or less.
Will I need anything else?
You may need additional hardware if your TV uses a different screw size or if you are mounting to anything other than studs. You will also want an electric screwdriver with a drill bit and a stud finder. A drop cloth to cover your carpet or furniture may help, and a separate level can be a good idea as well.
What is a VESA pattern?
VESA pattern is the mounting pattern. There are several different sizes used by manufacturers. It is the measurement between mounting holes side to size and then up and down. This measurement will always be in millimeters.
What are the dimensions on the mount?
The base is 18.9 inches wide and 8.1 inches tall. The arms are 17.1 inches long.
Does this tilt or swivel?
This mount can be used flat or tilted down.
Can you mount this on brick, plaster, or stone?
This mounting kit includes hardware to mount on drywall over studs and concrete. With special tools and hardware, you may be able to mount on other surfaces. Please consult an installation professional if you are unsure about how to mount in your home.
Will this work with a curved TV?
Yes, it will. It comes with a variety of spacers to accommodate for a curve.
How far away from the wall does this sit?
This sits approximately one inch from the wall.
