TP-LINK TL-SG1016PE 16-Port Gigabit Easy Smart PoE Switch with 8-Port PoE+
SKU#: TL-SG1016PE
UPC#:845973020095
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- 16 10/100/1000Mbps RJ45 ports
- Equipped with 8 PoE+ supported ports to transfer data and power over a single cable
- Works with IEEE 802.3af/at compliant devices, expanding home and office networks
- Simple network set-up on top of plug-and-play connectivity
- Web-based user interface and management utility simplify configuration
- Specs+
- Reviews+
- 16 10/100/1000Mbps RJ45 ports
- Equipped with 8 PoE+ supported ports to transfer data and power over a single cable
- Works with IEEE 802.3af/at compliant devices, expanding home and office networks
- Simple network set-up on top of plug-and-play connectivity
- Web-based user interface and management utility simplify configuration
TP-LINK 16-Port Gigabit PoE Switch with 8-Port PoE+
What This Product Does
How This Product Works
TL-SG1016PE support 8 Power over Ethernet Plus (PoE+) ports, which can automatically negotiate and supply appropriate power to any IEEE 802.3af/at the compliant device. In this situation, the electrical power is transmitted along with data on a single cable, allowing you to expand your network where you want to install your wireless AP, camera, or phone, and no electric outlet is available.
Overload Protection
TL-SG1016PE is limiting its PoE power supply when its power is over the limit. When accumulated PoE power consumption exceeds 110W, the output current will be automatically limited and a PoE priority mechanism will kick in to arrange the priority among the 8 PoE ports.
Port Priority Function
PoE power priority is arranged along with the port number. Port 1 has the highest priority and port 8 has the lowest priority. This function will help protect the system if the system power becomes overloaded. For example, Ports 1, 2, 3, 4, and 5 are using 30w (maximum power per port is 30W), and the system power is 110w in total (PoE max LED will be on if all PoE PDs power consumption is more than 110W). If there is an additional PD inserted to Port 4 with 20w then the system will cut off Port 5 power supply to protect the system, this means Port 1, 2, and 3, will use 90w, and Port 4 will use 20w, and no power will be supplied to Port 5.
Easy To Use
TL-SG1016PE is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance, and quality, the TP-LINK TL-SG1016PE 16-Port Gigabit Desktop/Rack-mountable Switch with 8-Port PoE is a great choice for expanding your home or office network.
| Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p |
|---|---|
| Interface | 16 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX |
| Network Media | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
| Fan Quantity | 1 |
| Physical Security Lock | Yes |
| PoE Ports (RJ45) | Standard: 802.3 at (30W) PoE Ports: Port 1- Port 8 Total PoE Power Budget: 110W |
| Dimensions ( W x D x H ) | 11.6 × 7.1 × 1.7 in. (294 × 180 × 44 mm) |
| Mounting | 13" and 19" 1U rack mountable |
| Max Power Consumption | 14.7W (no PD load) 131.4W (with 110W PD load) |
| Max Heat Dissipation | 50.2 BTU/h (no PD load) 448.4 BTU/h (with 110W PD load) |
| PERFORMANCE | |
|---|---|
| Switching Capacity | 32Gbps |
| Packet Forwarding Rate | 23.8Mbps |
| MAC Address Table | 8K |
| Packet Buffer Memory | 4.1Mb |
| Jumbo Frame | 9KB |
TP-LINK 16-Port Gigabit PoE Switch with 8-Port PoE+
What This Product Does
How This Product Works
TL-SG1016PE support 8 Power over Ethernet Plus (PoE+) ports, which can automatically negotiate and supply appropriate power to any IEEE 802.3af/at the compliant device. In this situation, the electrical power is transmitted along with data on a single cable, allowing you to expand your network where you want to install your wireless AP, camera, or phone, and no electric outlet is available.
Overload Protection
TL-SG1016PE is limiting its PoE power supply when its power is over the limit. When accumulated PoE power consumption exceeds 110W, the output current will be automatically limited and a PoE priority mechanism will kick in to arrange the priority among the 8 PoE ports.
Port Priority Function
PoE power priority is arranged along with the port number. Port 1 has the highest priority and port 8 has the lowest priority. This function will help protect the system if the system power becomes overloaded. For example, Ports 1, 2, 3, 4, and 5 are using 30w (maximum power per port is 30W), and the system power is 110w in total (PoE max LED will be on if all PoE PDs power consumption is more than 110W). If there is an additional PD inserted to Port 4 with 20w then the system will cut off Port 5 power supply to protect the system, this means Port 1, 2, and 3, will use 90w, and Port 4 will use 20w, and no power will be supplied to Port 5.
Easy To Use
TL-SG1016PE is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance, and quality, the TP-LINK TL-SG1016PE 16-Port Gigabit Desktop/Rack-mountable Switch with 8-Port PoE is a great choice for expanding your home or office network.
| Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p |
|---|---|
| Interface | 16 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX |
| Network Media | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
| Fan Quantity | 1 |
| Physical Security Lock | Yes |
| PoE Ports (RJ45) | Standard: 802.3 at (30W) PoE Ports: Port 1- Port 8 Total PoE Power Budget: 110W |
| Dimensions ( W x D x H ) | 11.6 × 7.1 × 1.7 in. (294 × 180 × 44 mm) |
| Mounting | 13" and 19" 1U rack mountable |
| Max Power Consumption | 14.7W (no PD load) 131.4W (with 110W PD load) |
| Max Heat Dissipation | 50.2 BTU/h (no PD load) 448.4 BTU/h (with 110W PD load) |
| PERFORMANCE | |
|---|---|
| Switching Capacity | 32Gbps |
| Packet Forwarding Rate | 23.8Mbps |
| MAC Address Table | 8K |
| Packet Buffer Memory | 4.1Mb |
| Jumbo Frame | 9KB |
