Powercom SMK-2000A, 2000VA, 6+0 Outlets
SKU#: SMK-2000A
UPC#:683828992582Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Specs+
- AC Input Capacity on Battery : 2000VA
- AC Input Voltage (+/-) : 25% at line input
- AC Input Frequency : 50 or 60 Hz+/-5% (auto sensing)
- AC Output Voltage : Pure sine wave at +/-5% of nominal, -10% of nominal after low battery warning
- AC Output Frequency : 50 or 60 Hz +/- 0.5%
- AC Output Voltage Regulation : AVR automatically increase output voltage 15% above input voltage if -9% to -25% of nominal. AVR decrease output voltage 15% below input
- voltage if +9% to +25% of nominal
- Protection Spike : 320 Joules, 2ms
- Protection EMI/RFI : 10dB at 0.15 MHz, 50 dB at 30 MHz
- Protection Overload : UPS automatic shutdown if overload exceeds 110% nominal at 20 sec and 125% at 5 sec
- Protection Transfer Time : 2/4 milliseconds (typical), including detection time
- Protection Short Protection : UPS output cut off immediately or input fuse( or breaker) protection
- Battery Type : Hot swappable, sealed, maintenance-free lead acid, with 3 - 6 year lifetime
- Battery Typical : 4 hours (to 90% of full capacity)
- Battery Protection : Automatic self-test & discharge protection, replace battery indicator
- Battery Run Time : ~ 120 minutes
- Weight : 30Kg (66lbs)
- Dimension : 170x450x226mm (6.7x17.7x8.9")
- LCD Indicators Status Indicate line, bypass, inv, backup, fault, bat capacity, load capacity, I/P frequency, O/P voltage, O/P frequency, inside temperature, fault status, load
- Alarm Battery Backup : Slow beeping sound (about 0.25 Hz)
- Alarm Battery Low : Rapid beeping sound (about 1.00Hz)
- Alarm Overload : Continue beeping sound
- Interface Dry Contact : Sends AC fail and battery low signals, and receives shutdown signal from computer
- Interface RS-232 : Detect battery low, Schedule UPS on/off, AC input/output power status display
- Interface Option : Novell, SNMP, Windows NT, Window 95/98/2000/ME/XP/7/8
- Environment Ambient : 3,500 meters max. elevation, 0-95% humidity non-condensing, 0-48 deg c
- Environment Audible <40dBA (1 meter from surface) Environment Storage Condition : 15,000 meters max. elevation
- Reviews+
- AC Input Capacity on Battery : 2000VA
- AC Input Voltage (+/-) : 25% at line input
- AC Input Frequency : 50 or 60 Hz+/-5% (auto sensing)
- AC Output Voltage : Pure sine wave at +/-5% of nominal, -10% of nominal after low battery warning
- AC Output Frequency : 50 or 60 Hz +/- 0.5%
- AC Output Voltage Regulation : AVR automatically increase output voltage 15% above input voltage if -9% to -25% of nominal. AVR decrease output voltage 15% below input
- voltage if +9% to +25% of nominal
- Protection Spike : 320 Joules, 2ms
- Protection EMI/RFI : 10dB at 0.15 MHz, 50 dB at 30 MHz
- Protection Overload : UPS automatic shutdown if overload exceeds 110% nominal at 20 sec and 125% at 5 sec
- Protection Transfer Time : 2/4 milliseconds (typical), including detection time
- Protection Short Protection : UPS output cut off immediately or input fuse( or breaker) protection
- Battery Type : Hot swappable, sealed, maintenance-free lead acid, with 3 - 6 year lifetime
- Battery Typical : 4 hours (to 90% of full capacity)
- Battery Protection : Automatic self-test & discharge protection, replace battery indicator
- Battery Run Time : ~ 120 minutes
- Weight : 30Kg (66lbs)
- Dimension : 170x450x226mm (6.7x17.7x8.9")
- LCD Indicators Status Indicate line, bypass, inv, backup, fault, bat capacity, load capacity, I/P frequency, O/P voltage, O/P frequency, inside temperature, fault status, load
- Alarm Battery Backup : Slow beeping sound (about 0.25 Hz)
- Alarm Battery Low : Rapid beeping sound (about 1.00Hz)
- Alarm Overload : Continue beeping sound
- Interface Dry Contact : Sends AC fail and battery low signals, and receives shutdown signal from computer
- Interface RS-232 : Detect battery low, Schedule UPS on/off, AC input/output power status display
- Interface Option : Novell, SNMP, Windows NT, Window 95/98/2000/ME/XP/7/8
- Environment Ambient : 3,500 meters max. elevation, 0-95% humidity non-condensing, 0-48 deg c
- Environment Audible <40dBA (1 meter from surface) Environment Storage Condition : 15,000 meters max. elevation
Powercom SMK-2000A, 2000VA, 6+0 Outlets
Note: This product has been discontinued.
AC INPUT
AC OUTPUT
PROTECTION
BATTERY
PHYSICAL
INDICATOR
ALARM
INTERFACE
ENVIRONMENT
Powercom SMK-2000A, 2000VA, 6+0 Outlets
Note: This product has been discontinued.
AC INPUT
AC OUTPUT
PROTECTION
BATTERY
PHYSICAL
INDICATOR
ALARM
INTERFACE
ENVIRONMENT
