Jonard Tools Adjustable Round Hole Cutter, 2.2"-10"
SKU#: AHC-10
UPC#:811490017764
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Cuts plywood, sheetrock, plasterboard, and acrylic sheet up to 1 1/16” (2.7 cm) thick
- Cutting depth is adjustable via hex locknut and compression spring
- Cuts hole sizes from 2.2” (55 mm) to 10” (254 mm)
- Polycarbonate transparent dust shield collects dust and prevents chips from flying into eyes while cutting
- Rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris
- Compression spring absorbs vibrations while cutting
- Can be used with any variable-speed drill
- Includes rugged carry case
- Power drill not included with hole cutter
- Specs+
- Cut Type: Round Hole
- Works On: Plywood, Sheetrock, Plasterboard, Acrylic Sheet
- Cutting Diameter Range: 2.2"-10" (56 mm-256 mm)
- Maximum Cutting Depth: 1.1" (27 mm)
- Bit Diameter: 0.236” (6.0 mm)
- Bit Length: 1.70” (43.27 mm)
- Bit Material: Steel
- Hex Chuck Size/Arbor Size: 3/8" (9.53 mm)
- Dimensions: 13.5" x 4.6" x 14.1" (342 mm x 118 mm x 360 mm)
- Weight: 2.53 lb (1148.62 g)
- UPC: 811490017764
- Reviews+
- Cuts plywood, sheetrock, plasterboard, and acrylic sheet up to 1 1/16” (2.7 cm) thick
- Cutting depth is adjustable via hex locknut and compression spring
- Cuts hole sizes from 2.2” (55 mm) to 10” (254 mm)
- Polycarbonate transparent dust shield collects dust and prevents chips from flying into eyes while cutting
- Rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris
- Compression spring absorbs vibrations while cutting
- Can be used with any variable-speed drill
- Includes rugged carry case
- Power drill not included with hole cutter
- Cut Type: Round Hole
- Works On: Plywood, Sheetrock, Plasterboard, Acrylic Sheet
- Cutting Diameter Range: 2.2"-10" (56 mm-256 mm)
- Maximum Cutting Depth: 1.1" (27 mm)
- Bit Diameter: 0.236” (6.0 mm)
- Bit Length: 1.70” (43.27 mm)
- Bit Material: Steel
- Hex Chuck Size/Arbor Size: 3/8" (9.53 mm)
- Dimensions: 13.5" x 4.6" x 14.1" (342 mm x 118 mm x 360 mm)
- Weight: 2.53 lb (1148.62 g)
- UPC: 811490017764
Adjustable Round Hole Cutter, 2.2"-10"
The Jonard Tools AHC-10 adjustable hole cutter is designed for cutting round holes in ceilings, walls, and floors and is the perfect tool for installing recessed speakers, lighting, or other round objects.
Adjustable Round Hole Cutter, 2.2"-10"
The Jonard Tools AHC-10 adjustable hole cutter is designed for cutting round holes in ceilings, walls, and floors and is the perfect tool for installing recessed speakers, lighting, or other round objects.
