Kendall Howard 1908-3-001-02 Triple Fan Panel
SKU#: 1908-3-001-02
UPC#:879447001020
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Three (3) 105 CFM Fans
- Pre-Assembled and Ready for Use
- 4 Mounting Holes Per U Space
- Optional Grounding
- Specially Designed Power Cord
- Black Powder Coat Finish
- Rounded Corners
- Made in the USA
- 1 Year Manufacturer Warranty
- Specs+
- Width: 19"
- Depth: 1.06"
- Height: 5.22"
- Construction: Cold Rolled Steel
- Black Powder Coat Finish
- Sleeve Bearing System
- Voltage: 115 VAC
- Rated Speed: 3100 RPM
- Air Flow: 115 CFM
- Noise Level: 49dBA
- Operating Temperature: 14ËšF (-10Ëš) to 158ËšF (70ËšC)
- Cable Length: 6ft (72 inches)
- Plug Type: NEMA 1-15 (Type A)
- Package Contents+
- (1) 120mm Fan
- (1) 6ft Power Cord
- (1) 120mm Fan Guard
- (1) Assembly Parts Pack
- Reviews+
- Three (3) 105 CFM Fans
- Pre-Assembled and Ready for Use
- 4 Mounting Holes Per U Space
- Optional Grounding
- Specially Designed Power Cord
- Black Powder Coat Finish
- Rounded Corners
- Made in the USA
- 1 Year Manufacturer Warranty
- Width: 19"
- Depth: 1.06"
- Height: 5.22"
- Construction: Cold Rolled Steel
- Black Powder Coat Finish
- Sleeve Bearing System
- Voltage: 115 VAC
- Rated Speed: 3100 RPM
- Air Flow: 115 CFM
- Noise Level: 49dBA
- Operating Temperature: 14ËšF (-10Ëš) to 158ËšF (70ËšC)
- Cable Length: 6ft (72 inches)
- Plug Type: NEMA 1-15 (Type A)
- (1) 120mm Fan
- (1) 6ft Power Cord
- (1) 120mm Fan Guard
- (1) Assembly Parts Pack
Kendall Howard
Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.
The Kendall Howard Triple Fan Panel combines three 115 CFM fans, which together move 345 cubic feet of air per minute. By installing the Triple Fan Panel into your network configuration, you can ensure that the heat produced by your device will be properly and efficiently dissipated, resulting in a cooler environment within your cabinet.
This system comes with a 3-tail power cord that supplies power to all three fans with only using one outlet of your rack mountable UPS or power strip. This greatly simplifies the amount of cabling required with this assembly and allows you to not require much in the way of ties to keep them in control.
Details
The three 115 CFM high speed fans are pre-installed into a 3U heavy-gauge steel panel to provide an out-of-the-box solution. The vented steel panel allows air to move through it with ease while also providing a protective barrier over the face of the fan. Rack mountable panel easily mounts in any 19” EIA compliant rack or cabinet. As long as you have the space available, this solution will work great for you!
Simply mount using rack screws (and cage nuts if needed) and plug it in to start moving air within your rack configuration. Each cooling fan features four threaded ground holes for grounding each fan in installation where specific electrical or network configurations require it.
The newest design of this fan panel (not pictured) features a silver zinc wire grate for increased airflow. This is the version you will receive.
Kendall Howard
Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.
The Kendall Howard Triple Fan Panel combines three 115 CFM fans, which together move 345 cubic feet of air per minute. By installing the Triple Fan Panel into your network configuration, you can ensure that the heat produced by your device will be properly and efficiently dissipated, resulting in a cooler environment within your cabinet.
This system comes with a 3-tail power cord that supplies power to all three fans with only using one outlet of your rack mountable UPS or power strip. This greatly simplifies the amount of cabling required with this assembly and allows you to not require much in the way of ties to keep them in control.
Details
The three 115 CFM high speed fans are pre-installed into a 3U heavy-gauge steel panel to provide an out-of-the-box solution. The vented steel panel allows air to move through it with ease while also providing a protective barrier over the face of the fan. Rack mountable panel easily mounts in any 19” EIA compliant rack or cabinet. As long as you have the space available, this solution will work great for you!
Simply mount using rack screws (and cage nuts if needed) and plug it in to start moving air within your rack configuration. Each cooling fan features four threaded ground holes for grounding each fan in installation where specific electrical or network configurations require it.
The newest design of this fan panel (not pictured) features a silver zinc wire grate for increased airflow. This is the version you will receive.
