Under $25

CAT6 RJ45 Pass-Through Connectors (Pack of 25)

The Jonard Tools CAT6 RJ45 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT6 network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector.

Intended for use with Jonard's RJ11 and RJ45 connector crimping tool: UC-4569

Quest TBN-1002 UR-3 Splice 19-26AWG 100pk

If you ever find your back to the wiring wall, failure is not an option. To ensure success, we suggest you arm yourself with these TBN-1002 UR-3 IDC Splice Connectors from Quest. With this 100-pack in your back pocket, those wires won’t even know what hit them.

IDC stands for “insulation displacement connector,” and these stay right where they belong. These connectors can house two or three 19-26 AWG solid copper wires, and there’s no need to purchase extra tools. That pair of pliers you already own? Those’ll do just fine although there are specialized tools that provide more even pressure. Installing IDC connectors is lightning fast. There’s no stripping or prep needed. These connectors have teeth- literally. You just insert your wires and put the squeeze on the barrel. It’s lined with a metal plate that will pierce through the wire insulation for the conductivity you need and an iron grip. Outdoor environments are nothing to these, either. They’re filled with a protective silicone gel to keep out pesky moisture and fend off corrosion. So, go on. Splice in your house, at the office, or in your basement… No one ever has to know.

Quest TBN-1003 UY Splice 100pk, Yellow - FireFold

If you ever find your back to the wiring wall, failure is not an option. To ensure success, we suggest you arm yourself with these TBN-1003 UY IDC Splice Connectors from Quest. With this 100-pack in your back pocket, those wires won’t even know what hit them.

IDC stands for “insulation displacement connector,” and these stay right where they belong. These connectors can house two 22-26 AWG solid copper wires, and there’s no need to purchase extra tools. That pair of pliers you already own? Those’ll do just fine although there are specialized tools that provide more even pressure. Installing IDC connectors are lightning fast. There’s no stripping or prep needed. These connectors have teeth- literally. You just insert your wires and put the squeeze on the barrel. It’s lined with a metal plate that will pierce through the wire insulation for the conductivity you need and an iron grip. Outdoor environments are nothing to these, either. They’re filled with a protective silicone gel to keep out pesky moisture and fend off corrosion. So, go on. Splice in your house, at the office, or in your basement… No one ever has to know.

Quest B Connector Wire Splice - 100 Pack

If you ever find your back to the wiring wall, failure is not an option. To ensure success, we suggest you arm yourself with these TBN-1011 B-Connectors from Quest. With this 100-pack in your back pocket, those wires won’t even know what hit them.

We’ve heard them called “beans” or “beanies,” but they’re more than hot air. These crimp-style connectors can house up to four 19-26 AWG solid copper wires, and don’t let the word “crimp” give you second thoughts. There’s no need to purchase extra tools. That pair of pliers you already own? Those’ll do just fine. Installing B-connectors is lightning fast. There’s no stripping or prep needed. These connectors have teeth- literally. You just insert your wires and put the squeeze on the barrel. It’s lined with tons of tiny razor-sharp bits of metal that will pierce through the wire insulation for the conductivity you need and an iron grip. Outdoor environments are nothing to these, either. They’re filled with a non-curing sealant to keep out pesky moisture. So, go on. Splice in your house, at the office, or in your basement… No one ever has to know.

Quest UG-3 Splice 19-26AWG Connectors

If you ever find your back to the wiring wall, failure is not an option. To ensure success, we suggest you arm yourself with these TBN-1004 UG-3 IDC Splice Connectors from Quest. With this 100-pack in your back pocket, those wires won’t even know what hit them.

IDC stands for “insulation displacement connector,” and these stay right where they belong. These connectors can house two or three 19-26 AWG solid copper wires, and there’s no need to purchase extra tools. That pair of pliers you already own? Those’ll do just fine although there are specialized tools that provide more even pressure. Installing IDC connectors is lightning fast. There’s no stripping or prep needed. These connectors have teeth- literally. You just insert your wires and put the squeeze on the barrel. It’s lined with a metal plate that will pierce through the wire insulation for the conductivity you need and an iron grip. Outdoor environments are nothing to these, either. They’re filled with a protective silicone gel to keep out pesky moisture and fend off corrosion. So, go on. Splice in your house, at the office, or in your basement… No one ever has to know.

Platinum Tools Cat6 EZ-RJ45 Strain Relief  50 Pack

Platinum Solutions

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is important to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100036 is a 50-pack of EZ-RJ45 Cat6 strain-relief boots. These boots can only be used with EZ-RJ45 Cat6 connectors. When used with a connector, they help protect the cable from snags and relieve stress from bends and pressure.

The Difference

The initial steps for adding an EZ-RJ45 connector onto an Ethernet cable is the same. Slide the 100036 strain relief boot onto the cable as soon as you slip off the length you want. The unique design of these boots locks to the EZ-RJ45 end for easy all-at-once connections. Remove an inch and a half of the jacket. Untwist the pairs and line them up according to your chosen wiring diagram. Then insert the cable into the EZ-RJ45 connector, which is sold separately. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Cat6 RJ45 Toolless UTP Connector 24AWG - FireFold

Toolless modular plugs are the ideal solution for creating custom lengths of modular network cables. The modular plugs are designed for data applications and manufactured from high-impact clear polycarbonate to withstand everyday wear and tear.

Rapid45 Cat5e/6 Connector (50-100 pack)

Rapid45 is proud to bring you a new EZ-style pass-through RJ45 connector at an unmatched value. All the features you demand for your basic data and security installations in one Cat5e/Cat6 compatible connector. And the compact cut, strip & crimp tool makes terminations clean and simple