Manhattan 4K@60Hz 2-Port HDMI Splitter with Downscaling, 207614
SKU#: 207614
UPC#:766623207614
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Distributes a single HDMI audio/video source signal to two HDMI displays
- Resolutions up to Ultra-High-Definition (UHD) 4K@60Hz (3840×2160)
- EDID switch can downscale the 4K input signal to 1080p making mixed setups of old and new displays hassle-free with individual resolutions
- High Dynamic Range (HDR) for superior contrast and brilliant colors
- 4:4:4 chroma subsampling
- Up to 18 Gbps total bandwidth with 6 Gbps per channel at 600 MHz
- Fully backward compatible with 4K@30Hz and 1080p displays
- EDID switch for automatic image optimization, ensuring settings like native resolution and refresh rate are configured properly
- Up to three splitters may be cascaded to support four 4K displays
- 36-bit Deep Color (12 bits per channel)
- Supports 3D Video
- Supports compressed DTS-HD Master Audio, uncompressed LPCM 8 channel (7.1 surround sound) audio and Dolby TrueHD as well as 32-channel audio
- Compatible with every HDMI deviceTVs, projectors, monitors, notebooks, PCs, AV receivers, streaming boxes, game consoles, PlayStation® (PS4/PS5), Xbox® (One/Series
- S/Series X), Blu-ray players and more
- Ideal for digital signage in retail and at trade show booths or for multi-display presentations in conference rooms and sports bars
- Plug-and-play installation; no configuration required
- HDCP 2.3 compliant
- Rubber feet for non-slip desktop use
- Micro-USB to USB-A power cable included
- Three-year warranty
- Specs+
- Package Contents+
- 4K@60Hz 2-Port HDMI Splitter with Downscaling
- Micro-USB to USB-A power cable, 0.8 m (2.6 ft.)
- Instructions
- Reviews+
- Distributes a single HDMI audio/video source signal to two HDMI displays
- Resolutions up to Ultra-High-Definition (UHD) 4K@60Hz (3840×2160)
- EDID switch can downscale the 4K input signal to 1080p making mixed setups of old and new displays hassle-free with individual resolutions
- High Dynamic Range (HDR) for superior contrast and brilliant colors
- 4:4:4 chroma subsampling
- Up to 18 Gbps total bandwidth with 6 Gbps per channel at 600 MHz
- Fully backward compatible with 4K@30Hz and 1080p displays
- EDID switch for automatic image optimization, ensuring settings like native resolution and refresh rate are configured properly
- Up to three splitters may be cascaded to support four 4K displays
- 36-bit Deep Color (12 bits per channel)
- Supports 3D Video
- Supports compressed DTS-HD Master Audio, uncompressed LPCM 8 channel (7.1 surround sound) audio and Dolby TrueHD as well as 32-channel audio
- Compatible with every HDMI deviceTVs, projectors, monitors, notebooks, PCs, AV receivers, streaming boxes, game consoles, PlayStation® (PS4/PS5), Xbox® (One/Series
- S/Series X), Blu-ray players and more
- Ideal for digital signage in retail and at trade show booths or for multi-display presentations in conference rooms and sports bars
- Plug-and-play installation; no configuration required
- HDCP 2.3 compliant
- Rubber feet for non-slip desktop use
- Micro-USB to USB-A power cable included
- Three-year warranty
- 4K@60Hz 2-Port HDMI Splitter with Downscaling
- Micro-USB to USB-A power cable, 0.8 m (2.6 ft.)
- Instructions
Manhattan 4K@60Hz 2-Port HDMI Splitter With Downscaling
Splits One HDMI Input to Two HDMI Outputs (1x2), 18G, EDID Switch for Downscaling, Black
4K 2-Port HDMI Splitter - Easily split a single HDMI audio/video signal across two HDMI displays in 4K60 UHD and HDR
The compact Manhattan 4K@60Hz 2-Port HDMI Splitter duplicates a signal from a single HDMI source to dual displays without distorting or degrading your video.
Flexible solution with downscaling from 4K to 1080p for many A/V Applications
Ideal for trade shows, classrooms, video conferencing, presentations and retail applications, this 1x2 Splitter is a great choice for splitting and distributing a synchronous signal to two displays when source equipment is remotely stored in a secured room or cabinet. Cascade multiple units up to three levels to output HDMI video/audio to additional displays in widely distributed applications. A smart EDID management switch on the unit can downscale a 4K input signal to Full HD (or lower), making installations with older displays hassle-free.
Easy installation and wide compatibility
Full compliance with HDMI 2.0 and HDCP 2.3 ensures that this 2-way Splitter can provide reliable performance. Quickly connect HDMI cables (not included) and the Micro-USB power cable to complete this affordable Ultra-High-Definition, 4K HDMI solution - no software/hardware configuration or complicated settings required. Full backward compatibility with 4K@30Hz and 1080p displays ensures that it will work with any HDMI source or destination device. This 4K Splitter is perfect for digital signage applications, where equipment may vary throughout your site.
High-quality video
With transmission bandwidth up to 18 Gbps, this HDMI Splitter supports UHD resolutions up to 3840x2160 (4K) at 60Hz. For smooth video and color transitions, the splitter offers 4:4:4 chroma subsampling, so every pixel gets its own unique color. Additional support for High-Dynamic Range (HDR) ensures that video content can be seen with enhanced brightness and superior contrasts.
Standards and Certifications
- HDMI 2.0
- HDCP 2.3
- CE
- FCC
- RoHS
- REACH
- UKCA
General
- Supported resolutions: 480p/576i/720p/1080i/1080p/4K@30Hz/4K@60Hz
- Max. video bandwidth: 18 Gbps / 600 MHz
- Power consumption: 5.0 W (max.)
- Daisy-chainable: up to three splitters/levels (5 m / 16 ft. maximum cable length between each unit)
Connections/buttons
- Three HDMI females 19-pin (one input, two outputs)
- One 5.0 V DC / 1.0 A power female, Micro-USB
- One EDID switch
LEDs
- OUT1
- OUT2
- SCALER
Physical
- Dimensions (L x W x H): 102 x 45 x 15 mm (4.02 x 1.77 x 0.59 in.)
- Net weight: 47 g (1.66 oz.)
- Gross weight: 185 g (6.53 oz.)
- Housing: plastic
Operating Environment
- Operation temperature: 0 - 70°C (32 - 158°F)
- Storage temperature: -20 - 80°C (-4 - 176°F)
- Humidity (non-condensing): 5 - 90%
Manhattan 4K@60Hz 2-Port HDMI Splitter With Downscaling
Splits One HDMI Input to Two HDMI Outputs (1x2), 18G, EDID Switch for Downscaling, Black
4K 2-Port HDMI Splitter - Easily split a single HDMI audio/video signal across two HDMI displays in 4K60 UHD and HDR
The compact Manhattan 4K@60Hz 2-Port HDMI Splitter duplicates a signal from a single HDMI source to dual displays without distorting or degrading your video.
Flexible solution with downscaling from 4K to 1080p for many A/V Applications
Ideal for trade shows, classrooms, video conferencing, presentations and retail applications, this 1x2 Splitter is a great choice for splitting and distributing a synchronous signal to two displays when source equipment is remotely stored in a secured room or cabinet. Cascade multiple units up to three levels to output HDMI video/audio to additional displays in widely distributed applications. A smart EDID management switch on the unit can downscale a 4K input signal to Full HD (or lower), making installations with older displays hassle-free.
Easy installation and wide compatibility
Full compliance with HDMI 2.0 and HDCP 2.3 ensures that this 2-way Splitter can provide reliable performance. Quickly connect HDMI cables (not included) and the Micro-USB power cable to complete this affordable Ultra-High-Definition, 4K HDMI solution - no software/hardware configuration or complicated settings required. Full backward compatibility with 4K@30Hz and 1080p displays ensures that it will work with any HDMI source or destination device. This 4K Splitter is perfect for digital signage applications, where equipment may vary throughout your site.
High-quality video
With transmission bandwidth up to 18 Gbps, this HDMI Splitter supports UHD resolutions up to 3840x2160 (4K) at 60Hz. For smooth video and color transitions, the splitter offers 4:4:4 chroma subsampling, so every pixel gets its own unique color. Additional support for High-Dynamic Range (HDR) ensures that video content can be seen with enhanced brightness and superior contrasts.
Standards and Certifications
- HDMI 2.0
- HDCP 2.3
- CE
- FCC
- RoHS
- REACH
- UKCA
General
- Supported resolutions: 480p/576i/720p/1080i/1080p/4K@30Hz/4K@60Hz
- Max. video bandwidth: 18 Gbps / 600 MHz
- Power consumption: 5.0 W (max.)
- Daisy-chainable: up to three splitters/levels (5 m / 16 ft. maximum cable length between each unit)
Connections/buttons
- Three HDMI females 19-pin (one input, two outputs)
- One 5.0 V DC / 1.0 A power female, Micro-USB
- One EDID switch
LEDs
- OUT1
- OUT2
- SCALER
Physical
- Dimensions (L x W x H): 102 x 45 x 15 mm (4.02 x 1.77 x 0.59 in.)
- Net weight: 47 g (1.66 oz.)
- Gross weight: 185 g (6.53 oz.)
- Housing: plastic
Operating Environment
- Operation temperature: 0 - 70°C (32 - 158°F)
- Storage temperature: -20 - 80°C (-4 - 176°F)
- Humidity (non-condensing): 5 - 90%
