Intellinet Gigabit High-Power PoE+ Injector, 561518
SKU#: 561518
UPC#:766623561518
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Saves time and money by delivering data and power via existing network cables
- IEEE 802.3at compliant (PoE+)
- Power output up to 30 watts
- Distance support: up to 100 m (328 ft.)
- Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP [Voice over Internet Protocol] telephones, IP surveillance cameras and more)
- Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
- Internal power supply
- Fanless design ideal for silent operation
- Fully NDAA-compliant
- Three-year warranty
- Specs+
- Package Contents+
- Gigabit High-Power PoE+ Injector
- Power cable
- Instructions
- Reviews+
- Saves time and money by delivering data and power via existing network cables
- IEEE 802.3at compliant (PoE+)
- Power output up to 30 watts
- Distance support: up to 100 m (328 ft.)
- Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP [Voice over Internet Protocol] telephones, IP surveillance cameras and more)
- Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
- Internal power supply
- Fanless design ideal for silent operation
- Fully NDAA-compliant
- Three-year warranty
- Gigabit High-Power PoE+ Injector
- Power cable
- Instructions
Intellinet Gigabit High-Power PoE+ Injector
1 x 30 W Port, IEEE 802.3at/af Compliant, Plastic Housing
Provide both power and data to a Powered Device (PD) using existing Cat5 cable and this PoE Injector.
The Intellinet Network Solutions Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant product to a non-PoE LAN switch port. The Power over Ethernet Injector can power and supply a network connection to a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered PD. This injector has an output power rating up to 30 watts. That's enough for even power-hungry PoE devices.
Reduce Wiring Costs.
There's no need to run AC power lines to get your PD set up and ready to do what it's supposed to. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.
Protect Your Equipment.
Once DC power is connected to your networked equipment through the Cat5e/6 cabling, the Intellinet Network Solutions PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages.
Standards
- IEEE 802.3af (Power over Ethernet)
- IEEE 802.3at (High-Power PoE+ Power over Ethernet)
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3ab (Gigabit Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
- IEEE 802.3x (flow control, for full duplex mode)
General
- Media support:
- 100Base-TX Cat5 UTP/STP RJ45, 8 pin
- 1000Base-T Cat5e UTP/STP RJ45, 8 pin
- Ports:
- One RJ45 10/100/1000 Mbps input port
- One RJ45 10/100/1000 Mbps data and power output port
- Protection functions:
- Short circuit protection for short GND
- Overload protection for currents over 0.6 A
- PoE Pinout: IEEE 802.3af/at Standard Mode A
- Pin 1: DC (+)
- Pin 2: DC (+)
- Pin 3: DC (-)
- Pin 6: DC (-)
- Certifications: FCC Class A, CE, RoHS, UKCA, NDAA
LED
- Dual-color power and PoE LED
Power
- Input: 100 – 240 V AC, 50 – 60 Hz
- Power consumption: 35 watts (maximum)
Environmental
- Plastic housing
- Dimensions: 136 (L) x 67 (W) x 34 (H) [mm] / 5.35 (L) x 2.64 (W) x 1.34 (H) [in.]
- Weight: 0.19 kg (0.42 lbs.)
- Operating temperature: 0 – 50°C (32 – 122°F)
- Operating humidity: 5 – 90% RH, non-condensing
- Storage temperature: -20 – 80°C (-4 – 176°F)
Intellinet Gigabit High-Power PoE+ Injector
1 x 30 W Port, IEEE 802.3at/af Compliant, Plastic Housing
Provide both power and data to a Powered Device (PD) using existing Cat5 cable and this PoE Injector.
The Intellinet Network Solutions Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant product to a non-PoE LAN switch port. The Power over Ethernet Injector can power and supply a network connection to a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered PD. This injector has an output power rating up to 30 watts. That's enough for even power-hungry PoE devices.
Reduce Wiring Costs.
There's no need to run AC power lines to get your PD set up and ready to do what it's supposed to. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.
Protect Your Equipment.
Once DC power is connected to your networked equipment through the Cat5e/6 cabling, the Intellinet Network Solutions PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages.
Standards
- IEEE 802.3af (Power over Ethernet)
- IEEE 802.3at (High-Power PoE+ Power over Ethernet)
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3ab (Gigabit Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
- IEEE 802.3x (flow control, for full duplex mode)
General
- Media support:
- 100Base-TX Cat5 UTP/STP RJ45, 8 pin
- 1000Base-T Cat5e UTP/STP RJ45, 8 pin
- Ports:
- One RJ45 10/100/1000 Mbps input port
- One RJ45 10/100/1000 Mbps data and power output port
- Protection functions:
- Short circuit protection for short GND
- Overload protection for currents over 0.6 A
- PoE Pinout: IEEE 802.3af/at Standard Mode A
- Pin 1: DC (+)
- Pin 2: DC (+)
- Pin 3: DC (-)
- Pin 6: DC (-)
- Certifications: FCC Class A, CE, RoHS, UKCA, NDAA
LED
- Dual-color power and PoE LED
Power
- Input: 100 – 240 V AC, 50 – 60 Hz
- Power consumption: 35 watts (maximum)
Environmental
- Plastic housing
- Dimensions: 136 (L) x 67 (W) x 34 (H) [mm] / 5.35 (L) x 2.64 (W) x 1.34 (H) [in.]
- Weight: 0.19 kg (0.42 lbs.)
- Operating temperature: 0 – 50°C (32 – 122°F)
- Operating humidity: 5 – 90% RH, non-condensing
- Storage temperature: -20 – 80°C (-4 – 176°F)
