Kendall Howard ESD Workbench
SKU#: ESDW-4830-1000
UPC#:879447000412
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Weight Capacity: 1,000 lb.
- Worksurface is constructed from NEVAMAR® Greystone, ESD protected laminate
- Gloss Black powder coat finish offers an easy to clean and a durable surface
- RoHS 3 compliant
- Limited lifetime warranty
- Manufactured in the USA
- UPC: 879447000412
- Features+
- Specs+
- Package Contents+
- Work Surface: 1
- Leg Assembly: 2
- Cross Bar: 2
- Gusset: 2
- Pan Head Screw: 38
- ESD Grounding Boot: 1
- Self-Adhesive Cable Tie Mount: 5
- 6” Cable Tie: 5
- Reviews+
- Weight Capacity: 1,000 lb.
- Worksurface is constructed from NEVAMAR® Greystone, ESD protected laminate
- Gloss Black powder coat finish offers an easy to clean and a durable surface
- RoHS 3 compliant
- Limited lifetime warranty
- Manufactured in the USA
- UPC: 879447000412
- Work Surface: 1
- Leg Assembly: 2
- Cross Bar: 2
- Gusset: 2
- Pan Head Screw: 38
- ESD Grounding Boot: 1
- Self-Adhesive Cable Tie Mount: 5
- 6” Cable Tie: 5
Kendall Howard ESD Workbench
Kendall Howard™ ESD Workbenches provide technicians in static control environments an ESD safe workspace for servicing and maintenance of sensitive electronic components across a multitude of industries. Designed for optimal ergonomics and static control in mind. The ESD Workbench can be adjusted in 4” height increments from 30” up to 38” in minutes. Each table includes two grounding options to ensure proper static protection. Ground 1 is through a 10’ external Earth ground wire. Ground 2 is established with a unique aluminum boot attached to a leg level to provide a connection to all non-insulated or ESD-safe flooring. Workbench is also equipped with a single strategically placed wrist grounding strap grounding point. (Wrist straps not included)
Ergonomic Height Settings
The worksurface can be fixed into three different heights in 4” height increments from 30”-38”.
Common Ground Point
ESD tables can be grounded two ways. A 10’ long Earth ground wire is provided to attach to common grounds. The second ground is built into a leg leveler with a unique aluminum boot. Workbench also includes a designated wrist strap grounding point.
Conductive Laminate Work Surface
Work surface has a low electrical resistance and will diffuse static charges to ensure protection of sensitive devices during assembly. Resistant to most common solvents, solder and fluxes creating an extremely durable surface
Test Data
Resistance to top 1.0 x 10^5 – 1.0 x 10^9 Ohms resistance at 70° F & 30% relative humidity. Resistance to ground (Common Ground Point, Wrist Strap, Floor Ground Equipment Ground) tested 1.0 x 10^5 to 1.0 x 10^9 Ohms resistance @ 70° F and 30% relative humidity.
Kendall Howard ESD Workbench
Kendall Howard™ ESD Workbenches provide technicians in static control environments an ESD safe workspace for servicing and maintenance of sensitive electronic components across a multitude of industries. Designed for optimal ergonomics and static control in mind. The ESD Workbench can be adjusted in 4” height increments from 30” up to 38” in minutes. Each table includes two grounding options to ensure proper static protection. Ground 1 is through a 10’ external Earth ground wire. Ground 2 is established with a unique aluminum boot attached to a leg level to provide a connection to all non-insulated or ESD-safe flooring. Workbench is also equipped with a single strategically placed wrist grounding strap grounding point. (Wrist straps not included)
Ergonomic Height Settings
The worksurface can be fixed into three different heights in 4” height increments from 30”-38”.
Common Ground Point
ESD tables can be grounded two ways. A 10’ long Earth ground wire is provided to attach to common grounds. The second ground is built into a leg leveler with a unique aluminum boot. Workbench also includes a designated wrist strap grounding point.
Conductive Laminate Work Surface
Work surface has a low electrical resistance and will diffuse static charges to ensure protection of sensitive devices during assembly. Resistant to most common solvents, solder and fluxes creating an extremely durable surface
Test Data
Resistance to top 1.0 x 10^5 – 1.0 x 10^9 Ohms resistance at 70° F & 30% relative humidity. Resistance to ground (Common Ground Point, Wrist Strap, Floor Ground Equipment Ground) tested 1.0 x 10^5 to 1.0 x 10^9 Ohms resistance @ 70° F and 30% relative humidity.
