CAT8 Shielded Field Termination Plug
SKU#: CAT8-S-PLG
UPC#:
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Ideal for high performance CAT8 networks needing to reach 40G speeds
- Meets CAT8 performance requirements per ANSI/TIA-568-D-2
- Housing is shielded with zinc die-cast nickel plating
- Tool-less termination saves time and money
- Strain relief boots are included
- Backwards compatible with CAT6 system
- 50 micro-inch gold plated contacts
- Suitable for shielded solid & stranded 22/24 AWG wire
- Fits cable OD between 7.3-9.0mm
- Power over Ethernet (POE) capabilities
- T568A & T568B wiring
- UL 94-V0 plastic components
- Specs+
- Package Contents+
- Qty 1 - CAT8 Shielded Field Termination Plug
- Qty 1 - IDC Cap
- Qty 2 - Stress Relief Boots
- Qty 1 - Copper Foil Tape
- Reviews+
- Ideal for high performance CAT8 networks needing to reach 40G speeds
- Meets CAT8 performance requirements per ANSI/TIA-568-D-2
- Housing is shielded with zinc die-cast nickel plating
- Tool-less termination saves time and money
- Strain relief boots are included
- Backwards compatible with CAT6 system
- 50 micro-inch gold plated contacts
- Suitable for shielded solid & stranded 22/24 AWG wire
- Fits cable OD between 7.3-9.0mm
- Power over Ethernet (POE) capabilities
- T568A & T568B wiring
- UL 94-V0 plastic components
- Qty 1 - CAT8 Shielded Field Termination Plug
- Qty 1 - IDC Cap
- Qty 2 - Stress Relief Boots
- Qty 1 - Copper Foil Tape
Choose the Right RJ45 Connectors
Leverage the power of 40G with shielded termination plugs. Your data network is only as strong as your weakest link, so if you're using CAT8 Ethernet cable, make sure you have the correct plugs for the job.
The shielded CAT8 field termination plug is designed specifically for CAT8 bulk cable. This 8 pin 8 conductor (8p8c) plug has 50 micro inch gold plated contacts for superior signal conductivity. The wire alignment insert provides an efficient termination without a crimp tool, although a cable stripper is recommended to prepare the cable for termination. This connector has been rated for PoE and is capable of power transfer.
Why Shield Your RJ45 Connectors?
This connector housing is shielded with zinc die-cast nickel plating. This makes our CAT8 plugs more durable while being less prone to corrosion and rust. All our CAT8 plugs come standard with two different sizes of boots. These boots provide better stress relief support around the connection point of the cable and connector.
The copper foil included with the RJ45 connector will also further shield from any unwanted EMI or crosstalk. So, update your system today so your company can get faster, more efficient conversion rates.
Housing Dimensions
| Width | 13.8mm |
| Height front | 18.4mm |
| Height rear | 14.5mm |
| Length | 62.18mm (Including Boot) |
| Conductor Space | 6.6 X 11.68 mm (H x W) |
Performance
| Insertion Force | 30N max. |
| Retention Strength | 7.7 Kg between jack and plug |
| Operating Temperature | -10ºC to 60ºC |
| Life Cycle (Mating) | 750 cycles min. |
| IDC Life Cycle | Suitable for 22 - 24 AWG stranded and solid wire, min. 20 installation cycles |
Material
| Extractor | UL 94V-2 black plastic |
| Housing | Zinc die-casting with nickel plating |
| Contact Material | Phosphor bronze with 100 micro-inch nickel plate |
| Contact Finish | min. 50 micro-inch gold plating |
| Wire Management Bar | UL 94V-2 white plastic and glass fiber |
| IDC Housing | UL 94V-2 white plastic |
| IDC Terminal | Titanium copper with tin plating |
| Grounding Contact | Zinc die-casting with nickel plating |
| Boots | UL 94V-2 transparent plastic |
Choose the Right RJ45 Connectors
Leverage the power of 40G with shielded termination plugs. Your data network is only as strong as your weakest link, so if you're using CAT8 Ethernet cable, make sure you have the correct plugs for the job.
The shielded CAT8 field termination plug is designed specifically for CAT8 bulk cable. This 8 pin 8 conductor (8p8c) plug has 50 micro inch gold plated contacts for superior signal conductivity. The wire alignment insert provides an efficient termination without a crimp tool, although a cable stripper is recommended to prepare the cable for termination. This connector has been rated for PoE and is capable of power transfer.
Why Shield Your RJ45 Connectors?
This connector housing is shielded with zinc die-cast nickel plating. This makes our CAT8 plugs more durable while being less prone to corrosion and rust. All our CAT8 plugs come standard with two different sizes of boots. These boots provide better stress relief support around the connection point of the cable and connector.
The copper foil included with the RJ45 connector will also further shield from any unwanted EMI or crosstalk. So, update your system today so your company can get faster, more efficient conversion rates.
Housing Dimensions
| Width | 13.8mm |
| Height front | 18.4mm |
| Height rear | 14.5mm |
| Length | 62.18mm (Including Boot) |
| Conductor Space | 6.6 X 11.68 mm (H x W) |
Performance
| Insertion Force | 30N max. |
| Retention Strength | 7.7 Kg between jack and plug |
| Operating Temperature | -10ºC to 60ºC |
| Life Cycle (Mating) | 750 cycles min. |
| IDC Life Cycle | Suitable for 22 - 24 AWG stranded and solid wire, min. 20 installation cycles |
Material
| Extractor | UL 94V-2 black plastic |
| Housing | Zinc die-casting with nickel plating |
| Contact Material | Phosphor bronze with 100 micro-inch nickel plate |
| Contact Finish | min. 50 micro-inch gold plating |
| Wire Management Bar | UL 94V-2 white plastic and glass fiber |
| IDC Housing | UL 94V-2 white plastic |
| IDC Terminal | Titanium copper with tin plating |
| Grounding Contact | Zinc die-casting with nickel plating |
| Boots | UL 94V-2 transparent plastic |
