NextGen Remote Extender Genius Receiver Kit
SKU#: REMOTEEXTENDERGENIUS
UPC#:830022004140
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
×
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Transmits a Remote's Signal Up to 100 ft. Away through Walls, Doors, & More
- Capable of Controlling Up to 12 Components
- Contains 6 Frequency Codes to Allow Up to 6 Genius Receivers in a 100-ft. Radius
- Includes Everything You Need to Control 1 Component (Or Up to 3 Using a Universal Remote)
- Package Contents+
- (2) 2/3 AAA Batteries (one is intended as a spare)
- (1) RF Transmitter (sleeve for 2/3 AAA Battery)
- (1) Conversion Sleeve to fit AA Battery Slots
- (1) AC/DC Adapter Power Source (with an 80” Cord)
- (1) Receiver Unit with 2 Emitter Outputs (56k & 38K, or use both as 38K). Unit Dimensions: 4” Diameter, 1-1/2” at the Tallest Center Dome, 8-1/2” Telescopic Antenna
- (1) 3-Eye Infrared Emitter Cable (96” Cord)
- (3) Eye Infrared Emitter Adhesive Place-Holders
- Reviews+
- Transmits a Remote's Signal Up to 100 ft. Away through Walls, Doors, & More
- Capable of Controlling Up to 12 Components
- Contains 6 Frequency Codes to Allow Up to 6 Genius Receivers in a 100-ft. Radius
- Includes Everything You Need to Control 1 Component (Or Up to 3 Using a Universal Remote)
- (2) 2/3 AAA Batteries (one is intended as a spare)
- (1) RF Transmitter (sleeve for 2/3 AAA Battery)
- (1) Conversion Sleeve to fit AA Battery Slots
- (1) AC/DC Adapter Power Source (with an 80” Cord)
- (1) Receiver Unit with 2 Emitter Outputs (56k & 38K, or use both as 38K). Unit Dimensions: 4” Diameter, 1-1/2” at the Tallest Center Dome, 8-1/2” Telescopic Antenna
- (1) 3-Eye Infrared Emitter Cable (96” Cord)
- (3) Eye Infrared Emitter Adhesive Place-Holders
NextGen Remote Extender Genius Receiver Kit
Extended Remote Control FreedomDesigned with the same idea behind the Remote Extender Plus, the Genius offers all of the same features and more! Use the NextGen Remote Extender Genius to add radio frequency signals to almost any infrared AA or AAA remote control for longer range. By using our patented radio frequency signaling system, you can control a component up to 100 feet away through walls, doors, windows, floors, and more. There's no need for a direct line-of-sight to your component's receiver, so you can feel free to hide bulky component boxes (DVD, stereo, cable, etc.) behind closed cabinets or closets. Imagine a clutter-free entertainment area while still having full access to all of your tucked away components. With the NextGen Remote Extender Genius, this is possible! Use it to de-clutter entertainment stands and create the home theater that you've always wanted.
Easy to Set-Up & Use
This start-up kit includes everything you'll need to control 1 component with a single remote or up to 3 components with a universal remote. The secret is in the specially designed batteries made for your component's remote control. Simply swap out one of your component’s remote control’s batteries for the special RF Transmitter battery. The kit comes with 2 rechargeable 2/3 AAA batteries (which can be charged inside the receiver’s base), 1 RF transmitter battery sleeve, 1 conversion sleeve to fit AA battery operated controllers, and one 3 Eye Infrared Emitter Cable. During installation, you will need to “marry” the signal between the RF Transmitter and the Genius by simply pressing the button on top of the Genius receiver while controlling your remote.
For Additional Components
Each receiver unit has 2 Eye Infrared Emitter outputs that together are capable of controlling up to 12 components (if used with the appropriate accessories). Each additional component being added to your system needs to be linked with an Eye Infrared Emitter, and each new remote control needs to have an RF Transmitter. For controlling more than 3 components, you can either purchase a second 3 Eye Infrared Emitter Cable (providing sensors for up to 3 components) or upgrade to the 6 Eye Infrared Emitter Cable (providing sensors for up to 6 components). This means that if you wish to control 12 different components with a single unit, you will need two 6 Eye Infrared Emitter cables and a separate RF Transmitter for each new remote control being added (systems using a universal remote will only need 1 RF Transmitter).
Available Frequencies for Additional Units
The Genius uses one frequency (433 MHz) that can be split up into 6 sub-channels. This allows you to have up to 6 separate Genius receiver kits within a 100-ft. radius of each other. If you wish to have an additional, 7th NextGen remote extender receiver, check out the 418 MHz frequency model of the NextGen Plus. Please note that because the Genius receiver uses sub-channels of a 433 MHz frequency, you CANNOT use the Plus 433 MHz frequency model within the same 100-ft. radius as the Genius (it will cause interference between units). The 418 MHz frequency model of the Plus, however, can be used in the same 100-ft. radius as the Genius without interference. With that being said, you can have up to 7 NextGen Remote Extender receiver kits (the Plus 418 MHz frequency unit and 6 Genius units) in a single 100-ft. radius.
NextGen Remote Extender Genius Receiver Kit
Extended Remote Control FreedomDesigned with the same idea behind the Remote Extender Plus, the Genius offers all of the same features and more! Use the NextGen Remote Extender Genius to add radio frequency signals to almost any infrared AA or AAA remote control for longer range. By using our patented radio frequency signaling system, you can control a component up to 100 feet away through walls, doors, windows, floors, and more. There's no need for a direct line-of-sight to your component's receiver, so you can feel free to hide bulky component boxes (DVD, stereo, cable, etc.) behind closed cabinets or closets. Imagine a clutter-free entertainment area while still having full access to all of your tucked away components. With the NextGen Remote Extender Genius, this is possible! Use it to de-clutter entertainment stands and create the home theater that you've always wanted.
Easy to Set-Up & Use
This start-up kit includes everything you'll need to control 1 component with a single remote or up to 3 components with a universal remote. The secret is in the specially designed batteries made for your component's remote control. Simply swap out one of your component’s remote control’s batteries for the special RF Transmitter battery. The kit comes with 2 rechargeable 2/3 AAA batteries (which can be charged inside the receiver’s base), 1 RF transmitter battery sleeve, 1 conversion sleeve to fit AA battery operated controllers, and one 3 Eye Infrared Emitter Cable. During installation, you will need to “marry” the signal between the RF Transmitter and the Genius by simply pressing the button on top of the Genius receiver while controlling your remote.
For Additional Components
Each receiver unit has 2 Eye Infrared Emitter outputs that together are capable of controlling up to 12 components (if used with the appropriate accessories). Each additional component being added to your system needs to be linked with an Eye Infrared Emitter, and each new remote control needs to have an RF Transmitter. For controlling more than 3 components, you can either purchase a second 3 Eye Infrared Emitter Cable (providing sensors for up to 3 components) or upgrade to the 6 Eye Infrared Emitter Cable (providing sensors for up to 6 components). This means that if you wish to control 12 different components with a single unit, you will need two 6 Eye Infrared Emitter cables and a separate RF Transmitter for each new remote control being added (systems using a universal remote will only need 1 RF Transmitter).
Available Frequencies for Additional Units
The Genius uses one frequency (433 MHz) that can be split up into 6 sub-channels. This allows you to have up to 6 separate Genius receiver kits within a 100-ft. radius of each other. If you wish to have an additional, 7th NextGen remote extender receiver, check out the 418 MHz frequency model of the NextGen Plus. Please note that because the Genius receiver uses sub-channels of a 433 MHz frequency, you CANNOT use the Plus 433 MHz frequency model within the same 100-ft. radius as the Genius (it will cause interference between units). The 418 MHz frequency model of the Plus, however, can be used in the same 100-ft. radius as the Genius without interference. With that being said, you can have up to 7 NextGen Remote Extender receiver kits (the Plus 418 MHz frequency unit and 6 Genius units) in a single 100-ft. radius.
