Platinum Tools 100020 Shielded Cat5E/Cat6 RJ45 EZ-RJ45 Connector 50 Pack
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- EZ-RJ45 design allows the easy pass through.
- Significant decrease of crosstalk.
- Increases performance.
- Significantly improve Shannon capacity.
- Substantially improved noise immunity.
- Lifetime Limited Manufacturer Warranty
- Specs+
- Fully shielded
- Wire Type: Solid or Stranded Cat5, Cat5E, Cat6
- Connector Type: RJ45
- Compatible with most RJ45 style crimp tools except for AMP
- FCC Compliant
- RoHS Compliant
- UL Rated
- Color: Clear
- Reviews+
- EZ-RJ45 design allows the easy pass through.
- Significant decrease of crosstalk.
- Increases performance.
- Significantly improve Shannon capacity.
- Substantially improved noise immunity.
- Lifetime Limited Manufacturer Warranty
- Fully shielded
- Wire Type: Solid or Stranded Cat5, Cat5E, Cat6
- Connector Type: RJ45
- Compatible with most RJ45 style crimp tools except for AMP
- FCC Compliant
- RoHS Compliant
- UL Rated
- Color: Clear
Platinum Tools Shielded Cat5E & Cat6 RJ45 EZ-RJ45 Connector
As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.
Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100020 is the single shielded EZ-RJ45 connector. They are fully foil-shielded with an internal ground for interference-sensitive installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.
The Difference
The initial steps for adding an EZRJ45 connector onto a shielded Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.
Platinum Tools Shielded Cat5E & Cat6 RJ45 EZ-RJ45 Connector
As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.
Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100020 is the single shielded EZ-RJ45 connector. They are fully foil-shielded with an internal ground for interference-sensitive installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.
The Difference
The initial steps for adding an EZRJ45 connector onto a shielded Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.