Bantam Citadel Power Conditioner with Rack, Table and Desk Mount, 8-outlets, LCD
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Enclosure Material: Molded ABS/PVC UL94-V0 industrial-grade plastic
- Enclosure Dimensions: 11.75” x 8.25” x 1.75” (299mm x 210mm x 44.5mm)
- Product Weight: 6 lbs. (2.72kg)
- Storage Temp: (ambient): 40° to 80° F (4° to 27° Celsius)
- Operating Temp: (ambient): -40° to 104° F (-20° to 40° Celsius)
- Desktop (vertical): Supplied with molded sturdy bolted stands
- Desktop (horizontal): Supplied with soft feet and placement targets
- Rack mount: Supplied with metal ears for mounting in 19-inch wide racks, may also mount vertically in zero-U rack configuration.
- Wall Mount: Two keyholes provided on bottom side of enclosure for #10 panhead screws.
- Features+
- Provides complete surge suppression, EMI/RFI filtration, harmonic attenuation, power factor correction, energy storage and wave-shaping
- 110-120 AC Volt, 12 amp Input and Output
- Supports 1440 or 2880 watts of load
- No moving parts, i.e. no fans, no relays, no switches
- Patented filtration and conditioning on all three wires - line, neutral and ground for complete surge and noise protection
- Never-fail, non-sacrifical component design.
- Color LCD display shows Surge Counter, Volts, Amps, Power(Watts), Freq(Hz) and Power Factor in real-time
- Unit may be mounted on a desktop either horizontally or vertically (feet supplied)
- Unit may be mounted in a 19" two-post rack or cabinet (brackets supplied) - Unit is 1U (1.75") high.
- Enclosure Material: Molded ABS/PVC UL94-V0 industrial-grade plastic
- Enclosure Dimensions: 11.75” x 8.25” x 1.75” (299mm x 210mm x 44.5mm)
- Product Weight: 6 lbs. (2.72kg)
- Storage Temp: (ambient): 40° to 80° F (4° to 27° Celsius)
- Operating Temp: (ambient): -40° to 104° F (-20° to 40° Celsius)
- Desktop (vertical): Supplied with molded sturdy bolted stands
- Desktop (horizontal): Supplied with soft feet and placement targets
- Rack mount: Supplied with metal ears for mounting in 19-inch wide racks, may also mount vertically in zero-U rack configuration.
- Wall Mount: Two keyholes provided on bottom side of enclosure for #10 panhead screws.
- Specs+
- Reviews+
- Enclosure Material: Molded ABS/PVC UL94-V0 industrial-grade plastic
- Enclosure Dimensions: 11.75” x 8.25” x 1.75” (299mm x 210mm x 44.5mm)
- Product Weight: 6 lbs. (2.72kg)
- Storage Temp: (ambient): 40° to 80° F (4° to 27° Celsius)
- Operating Temp: (ambient): -40° to 104° F (-20° to 40° Celsius)
- Desktop (vertical): Supplied with molded sturdy bolted stands
- Desktop (horizontal): Supplied with soft feet and placement targets
- Rack mount: Supplied with metal ears for mounting in 19-inch wide racks, may also mount vertically in zero-U rack configuration.
- Wall Mount: Two keyholes provided on bottom side of enclosure for #10 panhead screws.
- Provides complete surge suppression, EMI/RFI filtration, harmonic attenuation, power factor correction, energy storage and wave-shaping
- 110-120 AC Volt, 12 amp Input and Output
- Supports 1440 or 2880 watts of load
- No moving parts, i.e. no fans, no relays, no switches
- Patented filtration and conditioning on all three wires - line, neutral and ground for complete surge and noise protection
- Never-fail, non-sacrifical component design.
- Color LCD display shows Surge Counter, Volts, Amps, Power(Watts), Freq(Hz) and Power Factor in real-time
- Unit may be mounted on a desktop either horizontally or vertically (feet supplied)
- Unit may be mounted in a 19" two-post rack or cabinet (brackets supplied) - Unit is 1U (1.75") high.
- Enclosure Material: Molded ABS/PVC UL94-V0 industrial-grade plastic
- Enclosure Dimensions: 11.75” x 8.25” x 1.75” (299mm x 210mm x 44.5mm)
- Product Weight: 6 lbs. (2.72kg)
- Storage Temp: (ambient): 40° to 80° F (4° to 27° Celsius)
- Operating Temp: (ambient): -40° to 104° F (-20° to 40° Celsius)
- Desktop (vertical): Supplied with molded sturdy bolted stands
- Desktop (horizontal): Supplied with soft feet and placement targets
- Rack mount: Supplied with metal ears for mounting in 19-inch wide racks, may also mount vertically in zero-U rack configuration.
- Wall Mount: Two keyholes provided on bottom side of enclosure for #10 panhead screws.
Citadel Power Conditioner with Rack, Table and Desk Mount, 8-outlets, LCD
The Bantam Clean Power Citadel is a complete, three-wire, bi-directional surge suppressor with harmonic attenuation, power factor correction and EMI/RFI filtering. Feature a full-color LCD digital power meter with a lab-quality 8/20 microsecond surge counter built-in. You will be able to see power metrics and surge counts in real-time! Choose either the RM1440 with a 120 Volt NEMA 5-15P input cordset or the RM2880 with a 230 Volt NEMA 6-15P input cordset.
Our new flagship power conditioner, the Citadel by Bantam Clean Power, elevates your electronics' performance and protects them from the unknown. The Citadel features a full 12 amps of power protection to support critical connected devices. And with its all-new, custom designed information screen that includes a lab-quality surge counter, the Citadel informs you in real-time about your electrical power environment. The Citadel has a total of eight (8) outlets, two on the front panel and 6 on the rear panel. Unique to the Citadel RM1440 120 volt version are two IEC C10 outlets and two supplied IEC-to-NEMA 5-15R adapters. This gives you the flexibility to use IEC-only cordsets or power bricks (wall worts) without robbing space and blocking other outlets.
Physical/Environmental
Installation
Physical/Environmental
Installation
Model: |
RM1440A-US |
RM2880A-US |
Electrical Ratings |
||
Input Voltage:
|
110 VAC, 60 Hz, cordset with NEMA 5-15P plug |
230 VAC 50 or 60 Hz, cordset with NEMA 6-15P plug |
Output Voltage: |
110-125 VAC, 60 Hz |
220 – 240 VAC 50 or 60 Hz |
Max. Input/Output Voltage: |
125 VAC, 60 Hz |
275 VAC, 50 or 60 Hz |
Input/Output Current (Max.): |
12 Amperes RMS |
12 amperes RMS |
VA Rating: |
1440 VA |
2880 VA |
Power Factor (PF): |
0.99 |
|
Safety Standard(s): |
UL/IEC 62368-1 |
|
Agency Listing(s): |
UL (file E521973)
|
|
Performance Metrics | ||
Electrical Mode Protection: |
Patented series normal and common mode |
|
Harmonic Attenuation and Type: |
Up to 40% reduction of voltage and current noise up to 30 Mhz |
|
Power Factor Correction: |
Up to 30% improvement |
|
EMI/RFI Noise Attenuation: |
Over 20dB EMI/RFI suppression from 1Mhz to >20Mhz |
|
Electromagnetic Pulse (EMP) |
Blocks EMP current same as a surge, protecting line, neutral and ground paths |
|
Joule Rating (Surge): |
Series mode protection = unlimited joule rating |
|
Clamping Voltage (typical, closed circuit): |
At 120V AC, +/- 10V, neutral-ground +/- 10V |
At 230V AC, +/- 20V, neutral-ground +/- 20V |
Surge Suppression Residual Surge: |
Less than 1% of total surge current allowed to pass through to protective device |
|
Duty Cycle: |
Can indefinitely sustain and mitigate surges of 6000 Volts, 500 Amps occurring every 45 seconds, with less than 1% surge residual passing through Bantam to the protected device. |
Citadel Power Conditioner with Rack, Table and Desk Mount, 8-outlets, LCD
The Bantam Clean Power Citadel is a complete, three-wire, bi-directional surge suppressor with harmonic attenuation, power factor correction and EMI/RFI filtering. Feature a full-color LCD digital power meter with a lab-quality 8/20 microsecond surge counter built-in. You will be able to see power metrics and surge counts in real-time! Choose either the RM1440 with a 120 Volt NEMA 5-15P input cordset or the RM2880 with a 230 Volt NEMA 6-15P input cordset.
Our new flagship power conditioner, the Citadel by Bantam Clean Power, elevates your electronics' performance and protects them from the unknown. The Citadel features a full 12 amps of power protection to support critical connected devices. And with its all-new, custom designed information screen that includes a lab-quality surge counter, the Citadel informs you in real-time about your electrical power environment. The Citadel has a total of eight (8) outlets, two on the front panel and 6 on the rear panel. Unique to the Citadel RM1440 120 volt version are two IEC C10 outlets and two supplied IEC-to-NEMA 5-15R adapters. This gives you the flexibility to use IEC-only cordsets or power bricks (wall worts) without robbing space and blocking other outlets.
Physical/Environmental
Installation
Physical/Environmental
Installation
Model: |
RM1440A-US |
RM2880A-US |
Electrical Ratings |
||
Input Voltage:
|
110 VAC, 60 Hz, cordset with NEMA 5-15P plug |
230 VAC 50 or 60 Hz, cordset with NEMA 6-15P plug |
Output Voltage: |
110-125 VAC, 60 Hz |
220 – 240 VAC 50 or 60 Hz |
Max. Input/Output Voltage: |
125 VAC, 60 Hz |
275 VAC, 50 or 60 Hz |
Input/Output Current (Max.): |
12 Amperes RMS |
12 amperes RMS |
VA Rating: |
1440 VA |
2880 VA |
Power Factor (PF): |
0.99 |
|
Safety Standard(s): |
UL/IEC 62368-1 |
|
Agency Listing(s): |
UL (file E521973)
|
|
Performance Metrics | ||
Electrical Mode Protection: |
Patented series normal and common mode |
|
Harmonic Attenuation and Type: |
Up to 40% reduction of voltage and current noise up to 30 Mhz |
|
Power Factor Correction: |
Up to 30% improvement |
|
EMI/RFI Noise Attenuation: |
Over 20dB EMI/RFI suppression from 1Mhz to >20Mhz |
|
Electromagnetic Pulse (EMP) |
Blocks EMP current same as a surge, protecting line, neutral and ground paths |
|
Joule Rating (Surge): |
Series mode protection = unlimited joule rating |
|
Clamping Voltage (typical, closed circuit): |
At 120V AC, +/- 10V, neutral-ground +/- 10V |
At 230V AC, +/- 20V, neutral-ground +/- 20V |
Surge Suppression Residual Surge: |
Less than 1% of total surge current allowed to pass through to protective device |
|
Duty Cycle: |
Can indefinitely sustain and mitigate surges of 6000 Volts, 500 Amps occurring every 45 seconds, with less than 1% surge residual passing through Bantam to the protected device. |