BZBGEAR 4K 18Gbps HDMI Extender with Bi-directional IR and Zero Latency up to 70m
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- 4K: Supports resolutions up to 4K@60Hz.
- Audio Extraction: Digital audio can be extracted via the optical audio port.
- Multiple Audio Formats: Supports LPCM, DTS-HD, DTS Audio, Dolby Digital, and Dolby TrueHD.
- Plug and Play: Easy setup, no drivers to install.
- HDMI Loop-Out: Connect an additional display to the transmitter.
- Specs+
- Package Contents+
- 1 x HDMI Extender Transmitter
- 1 x HDMI Extender Receiver
- 1 x User Manual
- 1 x Wideband IR TX
- 1 x Wideband IR RX
- 2 x 5V2A DC Power Supply
- 8 x Mounting brackets
- 18 x Screws
- Reviews+
- 4K: Supports resolutions up to 4K@60Hz.
- Audio Extraction: Digital audio can be extracted via the optical audio port.
- Multiple Audio Formats: Supports LPCM, DTS-HD, DTS Audio, Dolby Digital, and Dolby TrueHD.
- Plug and Play: Easy setup, no drivers to install.
- HDMI Loop-Out: Connect an additional display to the transmitter.
- 1 x HDMI Extender Transmitter
- 1 x HDMI Extender Receiver
- 1 x User Manual
- 1 x Wideband IR TX
- 1 x Wideband IR RX
- 2 x 5V2A DC Power Supply
- 8 x Mounting brackets
- 18 x Screws
The BG-EXH-70C 4K HDMI extender can transmit an uncompressed 4K@60Hz HDMI signal with zero latency at distances up to 70 meters. By utilizing a Cat6/6A/7 network cable this extender allows a signal to be transmitted farther than is possible using standard HDMI cables. Digital audio extraction for an external audio system can be done via the S/PDIF port and supports LPCM, DTS-HD, DTS-Audio, Dolby Digital, and Dolby TrueHD audio formats. The HDMI loop-out allows for an additional display on the transmitter side. Plug and play setup, bi-directional IR pass-through, and surge protection ensure easy setup, flexibility, and reliability.
Model No. | BG-EXH-70C | |
Technical | Transmitter | Receiver |
HDMI compliance | HDMI2.0, compatible HDMI1.4 | |
HDCP compliance | HDCP2.2, compatible HDCP1.4 | |
Transmission medium | CAT6/CAT6A/CAT7 | |
Transmission distance | CAT6/6A/7 Transmission 70 meters | |
Video bandwidth | 18Gbps | |
Resolution support | 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 3840x2160@24/25/30/50/60Hz, 4096x2160@24/25Hz, 1280x960, 1280x800, 1280x768, 1680x1050, 1360x768, 1366x768, 1600x900, 1024x768, 800x600 | |
Audio support | LPCM/DTS-HD/DTS-Audio/Dolby Digital 5.1CH/Dolby TrueHD 7.1CH | |
HDR10 (YUV4:4:4) | support | |
HDMI Loop-out | support | |
ARC and S/PDIF out | support | |
EDID through | support | |
Bi-directional IR passback | support | |
Input TMDS signal | 0.7~1.2Vp-p | |
Input DDC signal | 5Vp-p | |
Input | HDMI x1, DC2.1 x1, 3.5mm jack x1 (IR) | DC2.1 x1, RJ45 x1, 3.5mm jack x1 (IR) |
Output | HDMI x1, RJ45 x1, 3.5mm jack x1 (IR) | HDMI x1, RJ45 x1, 3.5mm jack x1 (IR), Optical x1 |
HDMI connector | Type A 19 Pins, Female | |
Network cable standard | CAT6/CAT6A/CAT7, follow IEEE-5688 standard | |
Mechanical | Transmitter | Receiver |
Housing | Aluminium alloy material+crystal panel | |
Dimensions (LxWxH mm) | 106.0(L) x 99.0(W) x 26.2(H)mm | |
Net weight | 210g | 210g |
Power supply | 5V/2A | 5V/2A |
Power consumption | 4W | 4W |
Operation temperaure | -20~60°C | |
Storage temperature | -30~70°C | |
Relative humidity | 0~90% (no condensation) |
The BG-EXH-70C 4K HDMI extender can transmit an uncompressed 4K@60Hz HDMI signal with zero latency at distances up to 70 meters. By utilizing a Cat6/6A/7 network cable this extender allows a signal to be transmitted farther than is possible using standard HDMI cables. Digital audio extraction for an external audio system can be done via the S/PDIF port and supports LPCM, DTS-HD, DTS-Audio, Dolby Digital, and Dolby TrueHD audio formats. The HDMI loop-out allows for an additional display on the transmitter side. Plug and play setup, bi-directional IR pass-through, and surge protection ensure easy setup, flexibility, and reliability.
Model No. | BG-EXH-70C | |
Technical | Transmitter | Receiver |
HDMI compliance | HDMI2.0, compatible HDMI1.4 | |
HDCP compliance | HDCP2.2, compatible HDCP1.4 | |
Transmission medium | CAT6/CAT6A/CAT7 | |
Transmission distance | CAT6/6A/7 Transmission 70 meters | |
Video bandwidth | 18Gbps | |
Resolution support | 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 3840x2160@24/25/30/50/60Hz, 4096x2160@24/25Hz, 1280x960, 1280x800, 1280x768, 1680x1050, 1360x768, 1366x768, 1600x900, 1024x768, 800x600 | |
Audio support | LPCM/DTS-HD/DTS-Audio/Dolby Digital 5.1CH/Dolby TrueHD 7.1CH | |
HDR10 (YUV4:4:4) | support | |
HDMI Loop-out | support | |
ARC and S/PDIF out | support | |
EDID through | support | |
Bi-directional IR passback | support | |
Input TMDS signal | 0.7~1.2Vp-p | |
Input DDC signal | 5Vp-p | |
Input | HDMI x1, DC2.1 x1, 3.5mm jack x1 (IR) | DC2.1 x1, RJ45 x1, 3.5mm jack x1 (IR) |
Output | HDMI x1, RJ45 x1, 3.5mm jack x1 (IR) | HDMI x1, RJ45 x1, 3.5mm jack x1 (IR), Optical x1 |
HDMI connector | Type A 19 Pins, Female | |
Network cable standard | CAT6/CAT6A/CAT7, follow IEEE-5688 standard | |
Mechanical | Transmitter | Receiver |
Housing | Aluminium alloy material+crystal panel | |
Dimensions (LxWxH mm) | 106.0(L) x 99.0(W) x 26.2(H)mm | |
Net weight | 210g | 210g |
Power supply | 5V/2A | 5V/2A |
Power consumption | 4W | 4W |
Operation temperaure | -20~60°C | |
Storage temperature | -30~70°C | |
Relative humidity | 0~90% (no condensation) |