Crimson-AV F80A Fixed Mount for 46-100 Inch Flat Panel Screens
SKU#: F80A
UPC#:815885013874
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Post-installation leveling
- Click in place screen placement without use of tools
- Optional securing screws locks release latch for additional security
- Universal design
- VESA compatible
- Low-profile, holds screen close to wall for a clean look
- Open wall plate allows easy access for wiring
- Lateral shift for perfect placement
- Pre-sorted hardware pack for easy installation to wood studs or concrete surfaces included
- Specs+
- TV size range: 46”–100”
- Weight capacity: 200lb (91kg)
- Max mounting pattern: 1096x701mm
- VESA mounting pattern: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x200mm, 600x400mm, 800x400mm
- Depth from Wall: 1.4”(35.6mm)
- Post-Installation Leveling: +-5º
- Lateral adjustment: Varies with Screen
- Mounting surface: wood stud, concrete, cinder block or metal stud (accessory required HT6)
- Stud Spacing: dual stud 16”, 20”, 24”on center, triple stud 16”on center
- Construction: high-grade cold rolled steel
- Product Finish: scratch resistant epoxy powder coat
- Product Weight: 8.4lb (3.9kg)
- SPEC SHEET
- PRODUCT MANUAL
- Reviews+
- Q&A+
- Post-installation leveling
- Click in place screen placement without use of tools
- Optional securing screws locks release latch for additional security
- Universal design
- VESA compatible
- Low-profile, holds screen close to wall for a clean look
- Open wall plate allows easy access for wiring
- Lateral shift for perfect placement
- Pre-sorted hardware pack for easy installation to wood studs or concrete surfaces included
- TV size range: 46”–100”
- Weight capacity: 200lb (91kg)
- Max mounting pattern: 1096x701mm
- VESA mounting pattern: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x200mm, 600x400mm, 800x400mm
- Depth from Wall: 1.4”(35.6mm)
- Post-Installation Leveling: +-5º
- Lateral adjustment: Varies with Screen
- Mounting surface: wood stud, concrete, cinder block or metal stud (accessory required HT6)
- Stud Spacing: dual stud 16”, 20”, 24”on center, triple stud 16”on center
- Construction: high-grade cold rolled steel
- Product Finish: scratch resistant epoxy powder coat
- Product Weight: 8.4lb (3.9kg)
- SPEC SHEET
- PRODUCT MANUAL
Universal fixed mount for 46" to 100" flat panel screens. Low Profile, Universal Design
Adjustable flat wall mount with Universal hole pattern from Crimson AV is designed to fit a wide variety of flat panel screens. The F80A makes a secure installation quick and easy. Post-installation leveling allows for perfect screen positioning even when the ceiling is uneven. "Click in Place" screen placement requires no tools to secure the screen to the wall. Open wall plate design and kickstand feature provides easy access to wiring.
Will this fit my TV?
This will fit most 46-100" televisions. Please make sure your mounting pattern is 1096x600 or smaller and the TV weighs 200 lbs or less.
Will I need anything else?
You may need additional hardware if your TV uses a different screw size or if you are mounting to anything other than studs. You will also want an electric screwdriver with a drill bit and a stud finder. A drop cloth to cover your carpet or furniture may help, and a separate level can be a good idea as well.
What is a VESA pattern?
VESA pattern is the mounting pattern. There are several different sizes used by manufacturers. It is the measurement between mounting holes side to size and then up and down. This measurement will always be in millimeters.
What are the dimensions on the mount?
This mount is 45 inches wide and 6.5 inches tall with 24.5 inch long arms.
Does this tilt or swivel?
This does not tilt or swivel. It is a fixed mount.
Can you mount this on brick, plaster, or stone?
This mounting kit includes hardware to mount on drywall over studs, cinder blocks, and concrete. With special tools and hardware, you may be able to mount on other surfaces. Please consult an installation professional if you are unsure about how to mount in your home.
Will this work with a curved TV?
Yes, it will. It comes with a variety of spacers to accommodate for a curve.
How far away from the wall does this sit?
This mount sits 1.4 inches from the wall.
Does this have any special features?
Yes, this mount allows for post-installation leveling adjustments and a tool-free click-on system to attach the arms to the mount.
Universal fixed mount for 46" to 100" flat panel screens. Low Profile, Universal Design
Adjustable flat wall mount with Universal hole pattern from Crimson AV is designed to fit a wide variety of flat panel screens. The F80A makes a secure installation quick and easy. Post-installation leveling allows for perfect screen positioning even when the ceiling is uneven. "Click in Place" screen placement requires no tools to secure the screen to the wall. Open wall plate design and kickstand feature provides easy access to wiring.
Will this fit my TV?
This will fit most 46-100" televisions. Please make sure your mounting pattern is 1096x600 or smaller and the TV weighs 200 lbs or less.
Will I need anything else?
You may need additional hardware if your TV uses a different screw size or if you are mounting to anything other than studs. You will also want an electric screwdriver with a drill bit and a stud finder. A drop cloth to cover your carpet or furniture may help, and a separate level can be a good idea as well.
What is a VESA pattern?
VESA pattern is the mounting pattern. There are several different sizes used by manufacturers. It is the measurement between mounting holes side to size and then up and down. This measurement will always be in millimeters.
What are the dimensions on the mount?
This mount is 45 inches wide and 6.5 inches tall with 24.5 inch long arms.
Does this tilt or swivel?
This does not tilt or swivel. It is a fixed mount.
Can you mount this on brick, plaster, or stone?
This mounting kit includes hardware to mount on drywall over studs, cinder blocks, and concrete. With special tools and hardware, you may be able to mount on other surfaces. Please consult an installation professional if you are unsure about how to mount in your home.
Will this work with a curved TV?
Yes, it will. It comes with a variety of spacers to accommodate for a curve.
How far away from the wall does this sit?
This mount sits 1.4 inches from the wall.
Does this have any special features?
Yes, this mount allows for post-installation leveling adjustments and a tool-free click-on system to attach the arms to the mount.
