Vertical Cable Cat6 Keystone Jack 25 Pack
SKU#: 352-V2701/AL/25
UPC#:
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Easy, Snap-in Installation Saves Time
- Narrow Connector Allows High Port Density in Small Areas
- Long-Life 50µ Gold Plated Brass Contacts Resist Corrosion
- Standard 8 Position, 8 Conductor Wiring
- Flame Retardant Housing and PCB Board
- Color Coded for 568A and 568B Standards
- Compatible with I-Punch Termination Tool
- Specs+
- Housing Material: UL 94V-0 Self Extinguished Plastic
- IDC 110 Contacts: Phosphor Bronze, Nickel Plated
- Nose Contacts: 50µ Gold Plating over Nickel
- Operating Life: Minimum 750 Insertions
- Compatibility: 22-26 AWG Solid Cable
- 8P8C
- PCB: FR-4, 1.6mm Double Sided
- Cap: UL 94V-0 Rated
- Current Rating: 1.5Amp Max
- Dielectric Strength: 1000V RMS for 1 Min
- Insulation Resistance: 500mΩ
- Contact Resistance: 20mΩ
- DC Resistance: 0.1 Ohm
- Temperature Range: -10°C to 60°C Max
- Humidity: 10%~90% Non-Condensing
- Certifications: ANSI/TIA/EIA-568-C.2 Compliant, 3P, UL Listed, ETL Listed
- Dimensions (mm): 19.86H x 17W x 31D
- SPEC SHEET
- Reviews+
- Q&A+
- Easy, Snap-in Installation Saves Time
- Narrow Connector Allows High Port Density in Small Areas
- Long-Life 50µ Gold Plated Brass Contacts Resist Corrosion
- Standard 8 Position, 8 Conductor Wiring
- Flame Retardant Housing and PCB Board
- Color Coded for 568A and 568B Standards
- Compatible with I-Punch Termination Tool
- Housing Material: UL 94V-0 Self Extinguished Plastic
- IDC 110 Contacts: Phosphor Bronze, Nickel Plated
- Nose Contacts: 50µ Gold Plating over Nickel
- Operating Life: Minimum 750 Insertions
- Compatibility: 22-26 AWG Solid Cable
- 8P8C
- PCB: FR-4, 1.6mm Double Sided
- Cap: UL 94V-0 Rated
- Current Rating: 1.5Amp Max
- Dielectric Strength: 1000V RMS for 1 Min
- Insulation Resistance: 500mΩ
- Contact Resistance: 20mΩ
- DC Resistance: 0.1 Ohm
- Temperature Range: -10°C to 60°C Max
- Humidity: 10%~90% Non-Condensing
- Certifications: ANSI/TIA/EIA-568-C.2 Compliant, 3P, UL Listed, ETL Listed
- Dimensions (mm): 19.86H x 17W x 31D
- SPEC SHEET
Cat6 Keystone Jack 90 Degree - Vertical Cable
The Cat6 jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.
Meeting All Requirements
Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning. You can find a variety of keystone wall plates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place. Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.
Pair these keystone jacks with the Vertical Cable I-Punch Tool for a quick & precise punch down termination!
Do I need a tool to terminate?
Yes, you will need a punch down tool to properly terminate the twisted pairs.
Are these compatiable with surface mount boxes?
Yes, you can insert these into surface mount boxes.
Will these work with Cat6A cable?
Yes, but you will only get Cat6 speeds.
Are these 568A or 568B color coded?
These have dual T568A and T568B wiring options.
Will these fit in my wall plate?
Yes, these fit in standard keystone wall plates.
Cat6 Keystone Jack 90 Degree - Vertical Cable
The Cat6 jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.
Meeting All Requirements
Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning. You can find a variety of keystone wall plates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place. Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.
Pair these keystone jacks with the Vertical Cable I-Punch Tool for a quick & precise punch down termination!
Do I need a tool to terminate?
Yes, you will need a punch down tool to properly terminate the twisted pairs.
Are these compatiable with surface mount boxes?
Yes, you can insert these into surface mount boxes.
Will these work with Cat6A cable?
Yes, but you will only get Cat6 speeds.
Are these 568A or 568B color coded?
These have dual T568A and T568B wiring options.
Will these fit in my wall plate?
Yes, these fit in standard keystone wall plates.
