Enable-IT 265LP Gigabit PoE Lightning Surge Protector Kit
SKU#: 265LP
UPC#:896741002126Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Weatherproof micro design ideal for wall or pole mounting.
- All in one simple solution. that protects each end of your outdoor line.
- Compatible with any IEEE 802.3 AF / AT PoE injector / Midspan up to 58V DC.
- LAN Device independence – Transparent to 802.3 Protocols, Applications, and MAC / IP addresses.
- Gigabit Ethernet and PoE compatible.
- Specs+
- ESD/EMP Protection – Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs
- DC Spark-Over Voltage – 90V @ 100V/s
- Impulse Spark-over Voltage – 700V @ 1kV/µs
- Gigabit LAN full-duplex Ethernet Data & with simultaneous PoE delivery on all 8 pairs
- Ethernet: (2) LAN RJ-45 ports
- Height 3.5″ (90mm) Depth 1.28″ (32mm) Width 2.4″ (61mm)
- Operational Temperature: -22°F to 150°F (-30°to 65°C)
- Humidity: 10% to 90%, non-condensing
- Ruggedized wallmount plastic casing with enclosed Network ports
- Package Contents+
- (2) Enable-IT 265LP Outdoor Lightning Protection units
- (1) Enable-IT 265LP Quickstart Guide
- Reviews+
- Weatherproof micro design ideal for wall or pole mounting.
- All in one simple solution. that protects each end of your outdoor line.
- Compatible with any IEEE 802.3 AF / AT PoE injector / Midspan up to 58V DC.
- LAN Device independence – Transparent to 802.3 Protocols, Applications, and MAC / IP addresses.
- Gigabit Ethernet and PoE compatible.
- ESD/EMP Protection – Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs
- DC Spark-Over Voltage – 90V @ 100V/s
- Impulse Spark-over Voltage – 700V @ 1kV/µs
- Gigabit LAN full-duplex Ethernet Data & with simultaneous PoE delivery on all 8 pairs
- Ethernet: (2) LAN RJ-45 ports
- Height 3.5″ (90mm) Depth 1.28″ (32mm) Width 2.4″ (61mm)
- Operational Temperature: -22°F to 150°F (-30°to 65°C)
- Humidity: 10% to 90%, non-condensing
- Ruggedized wallmount plastic casing with enclosed Network ports
- (2) Enable-IT 265LP Outdoor Lightning Protection units
- (1) Enable-IT 265LP Quickstart Guide
Enable-IT Gigabit PoE Lightning Surge Protector Kit
The Enable-IT™ 265LP Gigabit PoE Lightning Protection Kit is a set of compact weather resistant units that provides cost-effective solution for protecting PoE and Ethernet devices from damaging electrostatic discharge and surges.
The units are fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100/1000 Base-T Ethernet networks, providing Surge Protection for Ethernet data pairs as well as the PoE DC power feed.
The internal High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are /- 15 volts on pins, 1, 2, 3 and 6 and /- 58 volts on pins 4, 5, 7 and 8. The units are compatible with both normal and inverted polarity voltage PoE equipment.
For maximum Surge Protection for Ethernet and PoE installs, this kit provides two 265LP units – one at each end of your Ethernet cable run. Most PoE capable equipment is not protected from surges on Ethernet cabling. The Enable-IT™ 265LP Gigabit Ethernet Lightning Protector Kit is compatible with 10/100/1000 Base-T devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE).
These units will save your expensive LAN or PoE IP Equipment at both ends and they do their job by taking the brunt of a lightning strike damage. They are not repairable once they perform this task and will need to be replaced. If you live in a lightning prone area it is advisable to have a spare set for each outdoor line your trying to protect so that you maintain the safety of your expensive LAN and PoE Equipment.
Power
Data Rate
Interface
Dimensions
Environment
Enclosure
Enable-IT Gigabit PoE Lightning Surge Protector Kit
The Enable-IT™ 265LP Gigabit PoE Lightning Protection Kit is a set of compact weather resistant units that provides cost-effective solution for protecting PoE and Ethernet devices from damaging electrostatic discharge and surges.
The units are fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100/1000 Base-T Ethernet networks, providing Surge Protection for Ethernet data pairs as well as the PoE DC power feed.
The internal High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are /- 15 volts on pins, 1, 2, 3 and 6 and /- 58 volts on pins 4, 5, 7 and 8. The units are compatible with both normal and inverted polarity voltage PoE equipment.
For maximum Surge Protection for Ethernet and PoE installs, this kit provides two 265LP units – one at each end of your Ethernet cable run. Most PoE capable equipment is not protected from surges on Ethernet cabling. The Enable-IT™ 265LP Gigabit Ethernet Lightning Protector Kit is compatible with 10/100/1000 Base-T devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE).
These units will save your expensive LAN or PoE IP Equipment at both ends and they do their job by taking the brunt of a lightning strike damage. They are not repairable once they perform this task and will need to be replaced. If you live in a lightning prone area it is advisable to have a spare set for each outdoor line your trying to protect so that you maintain the safety of your expensive LAN and PoE Equipment.
Power
Data Rate
Interface
Dimensions
Environment
Enclosure
