Corning

ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 6
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.41
• Cable O.D. (mm): 10.5
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 15.8
• Min. Bend Radius Installation (in.): 6.2
• Min. Bend Radius Long Term (cm): 10.5
• Min. Bend Radius Long Term (in.): 4.1
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

24-F OS2 LT ALTOS BINDERLESS FAST ACCESS CABLE

This is Corning Cable Systems Altos 24 strand fiber optic cable part number 024ZU4-T4F22D20 and is designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations.

The loose tube gel-free design is fully water blocked using craft-friendly, water-swellable materials, which means cable access is simple and no clean up is required. The flexible craft-friendly buffer tubes are easy to route in closures and the SZ-stranded,loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric cable construction requires no bonding or grounding and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 24
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637

ALTOS® Loose Tube, Gel-Free, All-Dielectric 144 fiber Cable

FastAccess(TM) Technology, Single-mode (OS2), max. attenuation 0.4 dB/km

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 144
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.62
• Cable O.D. (mm): 15.8
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 23.7
• Min. Bend Radius Installation (in.): 9.3
• Min. Bend Radius Long Term (cm): 15.8
• Min. Bend Radius Long Term (in.): 6.2
• No. of Fibers: 144
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 96
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.48
• Cable O.D. (mm): 12.1
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 18.2
• Min. Bend Radius Installation (in.): 7.2
• Min. Bend Radius Long Term (cm): 12.1
• Min. Bend Radius Long Term (in.): 4.8
• No. of Fibers: 96
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG.

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OM1 62.5 MICRON MULTIMODE
• Cable Type: LOOSE TUBE
• Fiber Count: 12
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.41
• Cable O.D. (mm): 10.5
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 15.8
• Min. Bend Radius Installation (in.): 6.2
• Min. Bend Radius Long Term (cm): 10.5
• Min. Bend Radius Long Term (in.): 4.1
• No. of Fibers: 12
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

FREEDM® One Tight-Buffered Cable - Single-mode (OS2)

Applications: Aerial, Direct Buried, Duct, General Purpose Horizontal, Vertical Riser

Corning FREEDM One riser cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial and duct applications with no need for a transition splice when entering the building. The tight-buffered construction facilitates easier termination for low-fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 Um buffered fibers for easy identification, consistent stripping and direct termination. The s mall diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding o r bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: TIGHT BUFFERED
• Fiber Count: 12
• Fire Rating: RISER
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Cable O.D. (in.): 0.36
• Cable O.D. (mm): 6.5
• Max. Tensile Load Installation N: 675
• Max. Tensile Load Long Term. N: 200
• Min. Bend Radius Installation (cm): 9.8
• Min. Bend Radius Installation (in.): 3.8
• Min. Bend Radius Long Term (cm): 6.5
• Min. Bend Radius Long Term (in.): 2.6
• No. of Fibers: 12
• Max. Tensile Load Installation (lb.): 150
• Max. Tensile Load Long Term. (lb.): 45
• Unspsc Code: 26121607

FREEDM One Tight-Buffered Cable 4 F Single-mode

4 F, Single-mode (OS2)

Corning FREEDM® One riser cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial, duct and direct-buried applications with no need for a transition splice when entering the building. The tight buffered construction facilitates easier termination for low -fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 μm TBII® buffered fibers for easy identification, consistent stripping and direct termination. The small diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding or bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Cable Type: TIGHT BUFFERED
• Fiber Count: 4
• Fire Rating: RISER
• All-Dielectric: NO
• Armored: NO
• Rodent Protected: NO
• Unspsc Code: 26121607