PulseAudio ARC Digital Audio Extender
SKU#: PAEXARC1
UPC#:741835125550
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Extends ARC Digital Audio signals over Cat5e/6
- Supports a single HDMI® ARC input and output
- Extends digital audio signals up to 492ft (150m) at 96kHz or 295ft (90m) at 192kHz over a single Cat5e/6
- Built-in “ARC Backup Plan” with SPDIF input and output
- Supports Dolby / DTS 5.1CH and PCM 2CH audio formats
- Simultaneous output of HDMI® and SPDIF ports on the RX unit
- CEC pass-through when HDMI® ARC mode is enabled
- Dimensions: 3.5” x 2.8” x 0.8” (90mm x 72mm x 20mm)
- Weight: 6.2oz (175g)
- Specs+
- Reviews+
- Extends ARC Digital Audio signals over Cat5e/6
- Supports a single HDMI® ARC input and output
- Extends digital audio signals up to 492ft (150m) at 96kHz or 295ft (90m) at 192kHz over a single Cat5e/6
- Built-in “ARC Backup Plan” with SPDIF input and output
- Supports Dolby / DTS 5.1CH and PCM 2CH audio formats
- Simultaneous output of HDMI® and SPDIF ports on the RX unit
- CEC pass-through when HDMI® ARC mode is enabled
- Dimensions: 3.5” x 2.8” x 0.8” (90mm x 72mm x 20mm)
- Weight: 6.2oz (175g)
PulseAudio ARC Digital Audio Extender
The PulseAudio PAEXARC1 is an ARC Digital Audio Extender that allows digital audio to be routed from a display, back to a remote location or amplifier, over a single Cat5e/6 cable up to 492ft (150m). For displays without ARC capability, or when ARC settings are not working as they should, the built-in “ARC Backup Plan” is featured where audio can still be extended utilizing SPDIF. For applications where ARC signals need to be extended above HDMI® cabling limitations to an amplifier or distributed audio system, the PAEXARC1 is the perfect solution.
The range of the PAXEARC1 will vary depending on the HDMI®/ARC sample rates. For instance, higher sample rates, 192kHz, will be rated at 295ft (90m), while lower sample rates, 96kHz, will be rated at 492ft (150m).
PulseAudio ARC Digital Audio Extender
The PulseAudio PAEXARC1 is an ARC Digital Audio Extender that allows digital audio to be routed from a display, back to a remote location or amplifier, over a single Cat5e/6 cable up to 492ft (150m). For displays without ARC capability, or when ARC settings are not working as they should, the built-in “ARC Backup Plan” is featured where audio can still be extended utilizing SPDIF. For applications where ARC signals need to be extended above HDMI® cabling limitations to an amplifier or distributed audio system, the PAEXARC1 is the perfect solution.
The range of the PAXEARC1 will vary depending on the HDMI®/ARC sample rates. For instance, higher sample rates, 192kHz, will be rated at 295ft (90m), while lower sample rates, 96kHz, will be rated at 492ft (150m).
