Klein Tools Advanced Circuit Tracer Kit, ET450
SKU#: ET450
UPC#:092644693380
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- The Advanced Circuit Tracer Kit provides reliable tracing of energized or non-energized breakers, fuses, and wires
- Easily adjust receiver sensitivity level to detect the transmitted signal through drywall, cement block, and underground
- Versatile applications include tracing wires, conduit or pipes, or a single wire in a bundle
- Audible beep and visual indicators on receiver denotes signal strength
- Receiver features a flashlight for illumination in low-light areas and NCV function to test if wires are energized
- Transmitter has AC/DC external voltage indicators of 12V, 48V, 120V, 240V, and 480V
- Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case
- Specs+
- Type: Circuit Tracer
- Application: Trace Energized and Non-Energized Breakers, Fuses, and Wires
- Special Features: Flashlight and NCV Function on Receiver; Accessories, and Hard Case
- Material: ABS and Electronic Components
- Batteries: Transmitter: 6 × 1.5V AA Alkaline; Receiver: 4 × 1.5V AA Alkaline
- Battery Life: Up to 24 hr
- Drop Protection: 6' (2 m)
- Display: Reciever: LCD with Backlight
- Control Type: Transmitter and Receiver
- Voltage: External Indicators for 12V, 48V, 120V, 240V, and 480V
- Frequency: Transmitter: AC 45Hz to 65Hz; Receiver: 33kHz
- Ingress Protection: IP42
- Pollution Degree: 2
- Tests Continuity: No
- Integral Lead Storage: No
- Interchangeable Leads: Yes
- Lead Length: 3' (1 m) and 20' (6.1 m)
- Standard: CAT III 600V
- Case Included: Yes
- Overall Length: Receiver: 7.05'' (17.9 cm); Transmitter: 8.72'' (22.2 cm)
- Overall Height: Receiver: 1.84'' (4.5 cm); Transmitter: 1.51'' (3.9 cm)
- Overall Width: Receiver: 3.90'' (9.9 cm); Transmitter: 2.07'' (5.3 cm)
- Weight: Transmitter: 16.5 oz (470 g); Receiver: 11 oz (312 g)
- UPC: 092644693380
- Package Contents+
- Transmitter
- Receiver
- Blade and Ground Prongs
- Alligator Clips
- 3' and 20' Lead Adapters
- AC Plug Leads
- Instructions
- All Required Batteries
- Hard Carrying Case
- Reviews+
- The Advanced Circuit Tracer Kit provides reliable tracing of energized or non-energized breakers, fuses, and wires
- Easily adjust receiver sensitivity level to detect the transmitted signal through drywall, cement block, and underground
- Versatile applications include tracing wires, conduit or pipes, or a single wire in a bundle
- Audible beep and visual indicators on receiver denotes signal strength
- Receiver features a flashlight for illumination in low-light areas and NCV function to test if wires are energized
- Transmitter has AC/DC external voltage indicators of 12V, 48V, 120V, 240V, and 480V
- Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case
- Type: Circuit Tracer
- Application: Trace Energized and Non-Energized Breakers, Fuses, and Wires
- Special Features: Flashlight and NCV Function on Receiver; Accessories, and Hard Case
- Material: ABS and Electronic Components
- Batteries: Transmitter: 6 × 1.5V AA Alkaline; Receiver: 4 × 1.5V AA Alkaline
- Battery Life: Up to 24 hr
- Drop Protection: 6' (2 m)
- Display: Reciever: LCD with Backlight
- Control Type: Transmitter and Receiver
- Voltage: External Indicators for 12V, 48V, 120V, 240V, and 480V
- Frequency: Transmitter: AC 45Hz to 65Hz; Receiver: 33kHz
- Ingress Protection: IP42
- Pollution Degree: 2
- Tests Continuity: No
- Integral Lead Storage: No
- Interchangeable Leads: Yes
- Lead Length: 3' (1 m) and 20' (6.1 m)
- Standard: CAT III 600V
- Case Included: Yes
- Overall Length: Receiver: 7.05'' (17.9 cm); Transmitter: 8.72'' (22.2 cm)
- Overall Height: Receiver: 1.84'' (4.5 cm); Transmitter: 1.51'' (3.9 cm)
- Overall Width: Receiver: 3.90'' (9.9 cm); Transmitter: 2.07'' (5.3 cm)
- Weight: Transmitter: 16.5 oz (470 g); Receiver: 11 oz (312 g)
- UPC: 092644693380
- Transmitter
- Receiver
- Blade and Ground Prongs
- Alligator Clips
- 3' and 20' Lead Adapters
- AC Plug Leads
- Instructions
- All Required Batteries
- Hard Carrying Case
Klein Tools Advanced Circuit Tracer Kit
Advanced Circuit Tracer Kit
The Klein Tools ET450 Advanced Circuit Tracer Kit is a professional tracer for energized and non-energized breakers, fuses, and wires. When the Transmitter is connected to a circuit, the Receiver’s sensitivity can easily be adjusted to detect the transmitted signal on breakers, fuses, and wire through drywall, cement block, and underground. Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case with handle for convenient transportation and storage.
Klein Tools Advanced Circuit Tracer Kit
Advanced Circuit Tracer Kit
The Klein Tools ET450 Advanced Circuit Tracer Kit is a professional tracer for energized and non-energized breakers, fuses, and wires. When the Transmitter is connected to a circuit, the Receiver’s sensitivity can easily be adjusted to detect the transmitted signal on breakers, fuses, and wire through drywall, cement block, and underground. Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case with handle for convenient transportation and storage.
