Enable-IT 61W - 56VDC Gigabit PoE+ Injector
SKU#: 360
UPC#:896741002072Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- 60W – 56VDC IEEE 802.3 AT/AF/BT Power Over Ethernet Midspan Injector.
- FCC Part 15 Class B & EN55022 Class B.
- DOE Level VI Efficiency – 56VDC @ 1.2A = 60 watts nominal at 86%
- Rapid LAN style installation RJ45 jacks – no programming required.
- Maintains existing RJ-45 Ethernet Data (10/100/1000mbps).
- Supports VoD (Video on Demand) and MPEG IP channels.
- Network Equipment independence – Transparent to protocols, applications and MAC addresses.
- Cisco, Tango, Motorola and other Reverse Polarity compatible..
- FCC Class B Part 15 and EN55022 (CISPR 22) Class B.
- Immunity ESD: EN61000-4-2 level.
- Immunity RS : EN61000-4-3 level.
- Immunity CS : EN61000-4-6 level.
- Specs+
- AC Input (90 – 264VAC) @50/60Hz
- DC output 60W – 56V DC 1.5A IEEE 802.3 AT/AF/BT Power Over Ethernet Midspan Injector.
- Country Specific IEC 60320C6 Grounded power cord provided.
- Built in Auto-Recovery, Over-Voltage and Short Circuit Difference and Common Mode Protection.
- Clamping Protection – 11V LAN, 60V Power, Max Surge discharge – 1500A (8/20us) Power
- Peak Pulse Current – 36A (10/1000us) LAN, Shunt capacitance – <5 pF LAN
- 1000Mbps full-duplex Ethernet Data
- (1) LAN RJ-45 10/100/1000 Base-TX autosensing socket for LAN Input
- (1) LAN RJ-45 10/100/1000 Base-TX autosensing socket for PoE output
- Pins 1,2,4 & 5 + power, Pins 3,6,7 & 8 – power
- Height 1.30″ (33mm) Depth 3.98″ (101mm) Width 2.36″ (60mm)
- Operational Temperature: -40°F to 176°F (-40°to 80°C)
- Humidity: 5% to 95%, non-condensing
- Ruggedized lightweight casing with Power LED indicator.
- Package Contents+
- (1) EnableIT™ 360 60W – 56V Gigabit PoE Injector
- (1) (90 – 264V AC) Country Specific power cord provided
- (1) EnableIT™ 360 60W – 56V Gigabit PoE Injector Quickstart Guide
- Reviews+
- 60W – 56VDC IEEE 802.3 AT/AF/BT Power Over Ethernet Midspan Injector.
- FCC Part 15 Class B & EN55022 Class B.
- DOE Level VI Efficiency – 56VDC @ 1.2A = 60 watts nominal at 86%
- Rapid LAN style installation RJ45 jacks – no programming required.
- Maintains existing RJ-45 Ethernet Data (10/100/1000mbps).
- Supports VoD (Video on Demand) and MPEG IP channels.
- Network Equipment independence – Transparent to protocols, applications and MAC addresses.
- Cisco, Tango, Motorola and other Reverse Polarity compatible..
- FCC Class B Part 15 and EN55022 (CISPR 22) Class B.
- Immunity ESD: EN61000-4-2 level.
- Immunity RS : EN61000-4-3 level.
- Immunity CS : EN61000-4-6 level.
- AC Input (90 – 264VAC) @50/60Hz
- DC output 60W – 56V DC 1.5A IEEE 802.3 AT/AF/BT Power Over Ethernet Midspan Injector.
- Country Specific IEC 60320C6 Grounded power cord provided.
- Built in Auto-Recovery, Over-Voltage and Short Circuit Difference and Common Mode Protection.
- Clamping Protection – 11V LAN, 60V Power, Max Surge discharge – 1500A (8/20us) Power
- Peak Pulse Current – 36A (10/1000us) LAN, Shunt capacitance – <5 pF LAN
- 1000Mbps full-duplex Ethernet Data
- (1) LAN RJ-45 10/100/1000 Base-TX autosensing socket for LAN Input
- (1) LAN RJ-45 10/100/1000 Base-TX autosensing socket for PoE output
- Pins 1,2,4 & 5 + power, Pins 3,6,7 & 8 – power
- Height 1.30″ (33mm) Depth 3.98″ (101mm) Width 2.36″ (60mm)
- Operational Temperature: -40°F to 176°F (-40°to 80°C)
- Humidity: 5% to 95%, non-condensing
- Ruggedized lightweight casing with Power LED indicator.
- (1) EnableIT™ 360 60W – 56V Gigabit PoE Injector
- (1) (90 – 264V AC) Country Specific power cord provided
- (1) EnableIT™ 360 60W – 56V Gigabit PoE Injector Quickstart Guide
Enable-IT 61W - 56VDC Gigabit PoE Injector
The Enable-IT 360 60W 56V Gigabit PoE Injector (Power over Ethernet) is single port IEEE 802.3 AF/AT/BT(type 3) compliant Midspan solution that is a compact and easy to install with RJ-45 Ethernet cabling. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.
The Enable-IT 360 Gigabit PoE Injector is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3 AF/AT/BT compliant device, the Injector uses all 4 pair in a category rated wiring bundle. i.e. CAT5e or better run required for Gigabit Ethernet.
The Enable-IT 360 is a 60W 56V DC Gigabit PoE Injector supports both 2-pair and 4-pair PoE output and is ideal for installing high powered IP PoE devices up to 3,500ft when used in conjunction with an Enable-IT PoE Extender.
As will all PoE voltage drops over distance. As a rule of thumb you can lose up to 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring for best distance results.
Power
Data Rate
Interface
Dimensions
Environment
Enclosure
Enable-IT 61W - 56VDC Gigabit PoE Injector
The Enable-IT 360 60W 56V Gigabit PoE Injector (Power over Ethernet) is single port IEEE 802.3 AF/AT/BT(type 3) compliant Midspan solution that is a compact and easy to install with RJ-45 Ethernet cabling. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.
The Enable-IT 360 Gigabit PoE Injector is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3 AF/AT/BT compliant device, the Injector uses all 4 pair in a category rated wiring bundle. i.e. CAT5e or better run required for Gigabit Ethernet.
The Enable-IT 360 is a 60W 56V DC Gigabit PoE Injector supports both 2-pair and 4-pair PoE output and is ideal for installing high powered IP PoE devices up to 3,500ft when used in conjunction with an Enable-IT PoE Extender.
As will all PoE voltage drops over distance. As a rule of thumb you can lose up to 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring for best distance results.
Power
Data Rate
Interface
Dimensions
Environment
Enclosure
