Enable-IT 4-Port Gigabit PoE Extender Kit - PoE over 4-pair wiring
SKU#: 865XS PRO
UPC#:896741002287Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Extended Gigabit PoE Ethernet throughput over 4 pair new or existing Telephone wiring up to Category rated wiring.max distance 3,000ft / 915m encrypted and secure.
- Can be daisy chained to extend infinitely in linear or tree topology.
- Rapid LAN style installation RJ45 jacks – no programming required.
- Supports up to 9 Enable-IT 865XS PRO Gigabit PoE Extender CPE units on the same 4-pair wire for the entire length of the run – ideal for multidrop off of a single Enable-IT 865XS PRO Gigabit PoE Extender kit.
- Ruggedized Professional Business Grade mountable casing for harsh environments.
- LAN Device independence – Transparent to 802.3 Protocols, Applications and MAC / IP addresses.
- Longest warranty protection included exceeding any knockoff competitors.
- Quad Gigabit PoE LAN RJ-45 switch on the remote end. 1-port model available as the 865X PRO.
- Specs+
- 56V – 2.5A 60W Gigabit PoE Injector
- Country Specific (120-260V AC) Power Cord
- CPE unit – remote self powered uses 12V and passes remaining PoE budget to end PoE device
- 10/100/1000 Mbps full-duplex Ethernet Data
- 1000 Mbps Interconnect throughput
- Ethernet LAN Protocol Independent
- Ethernet LAN MTU 1500
- IP VLAN passthrough
- Ethernet: (4) LAN RJ-45 Standard 10/100/1000 Base-TX autosensing ports
- Interlink: (1) RJ-45 (4-Pair)
- Optimal power at distance, use 4-pair Cat5e or better wiring.
- Height 1″ (26mm) Depth 3.25″ (82.5mm) Width 4.37″ (111mm)
- Height 1.4″ (35mm) Depth 3.4″ (86mm) Width 4.4″ (111mm)
- Operational Temperature: -49°F to 168°F (-45°to 76°C)
- Humidity: 5% to 95%, non-condensing
- Ruggedized wallmount black Aluminum casing Optimized for heat extraction and isolation without fans.
- Package Contents+
- (1) EnableIT 865X PRO Gigabit PoE Extender CO unit
- (1) EnableIT 865XS PRO Gigabit PoE Extender CPE unit
- (2) 10′ Black RJ-45 Ethernet Patch Cords
- (1) 56V-2.5A 60W Gigabit PoE Country Specific (120-260V AC) Injector.
- (1) Country Specific Power cord for Injector
- (1) Enable-IT 865XS PRO Gigabit PoE Extender Quickstart Guide
- Reviews+
- Extended Gigabit PoE Ethernet throughput over 4 pair new or existing Telephone wiring up to Category rated wiring.max distance 3,000ft / 915m encrypted and secure.
- Can be daisy chained to extend infinitely in linear or tree topology.
- Rapid LAN style installation RJ45 jacks – no programming required.
- Supports up to 9 Enable-IT 865XS PRO Gigabit PoE Extender CPE units on the same 4-pair wire for the entire length of the run – ideal for multidrop off of a single Enable-IT 865XS PRO Gigabit PoE Extender kit.
- Ruggedized Professional Business Grade mountable casing for harsh environments.
- LAN Device independence – Transparent to 802.3 Protocols, Applications and MAC / IP addresses.
- Longest warranty protection included exceeding any knockoff competitors.
- Quad Gigabit PoE LAN RJ-45 switch on the remote end. 1-port model available as the 865X PRO.
- 56V – 2.5A 60W Gigabit PoE Injector
- Country Specific (120-260V AC) Power Cord
- CPE unit – remote self powered uses 12V and passes remaining PoE budget to end PoE device
- 10/100/1000 Mbps full-duplex Ethernet Data
- 1000 Mbps Interconnect throughput
- Ethernet LAN Protocol Independent
- Ethernet LAN MTU 1500
- IP VLAN passthrough
- Ethernet: (4) LAN RJ-45 Standard 10/100/1000 Base-TX autosensing ports
- Interlink: (1) RJ-45 (4-Pair)
- Optimal power at distance, use 4-pair Cat5e or better wiring.
- Height 1″ (26mm) Depth 3.25″ (82.5mm) Width 4.37″ (111mm)
- Height 1.4″ (35mm) Depth 3.4″ (86mm) Width 4.4″ (111mm)
- Operational Temperature: -49°F to 168°F (-45°to 76°C)
- Humidity: 5% to 95%, non-condensing
- Ruggedized wallmount black Aluminum casing Optimized for heat extraction and isolation without fans.
- (1) EnableIT 865X PRO Gigabit PoE Extender CO unit
- (1) EnableIT 865XS PRO Gigabit PoE Extender CPE unit
- (2) 10′ Black RJ-45 Ethernet Patch Cords
- (1) 56V-2.5A 60W Gigabit PoE Country Specific (120-260V AC) Injector.
- (1) Country Specific Power cord for Injector
- (1) Enable-IT 865XS PRO Gigabit PoE Extender Quickstart Guide
Enable-IT Gigabit PoE Extender Kit - Firefold
The Enable-IT 865XS PRO Gigabit PoE Extender kit is an ideal solution to install your IP surveillance cameras, WiFi access points, VoIP phones and other PoE devices where you need, not where you are limited to by false thinking LAN distance restrictions. It can operate up to 3,000ft / 915m from you power and data source and supports any PoE enabled WiFi Wireless Access Point, Security camera or other PoE powered equipment. This eliminates the need for your installers adding power supply outlets and associated AC power cabling, providing an affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.
Using the provided High Powered 60W 56V Injector, a single (120V ~ 240V) IEC 320 C14 standard Country specific power cord input will deliver PoE power sufficient enough to deploy multiple 12V ~ 24V / 6W ~ 30W PoE devices anywhere you need to.
Keep in mind that all DC including (PoE) voltage drops over distance and thicker gauge wire will help this issue. As a rule of thumb you will lose up to 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power strength at distance due to impedance. Lower power strength increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use more pairs or wire or 18 gauge wiring as a dedicated DC power buss – like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our 865XS PRO Gigabit PoE Extender or PoE DSLAM that can power a 56V 60W PoE IP PTZ Camera at 4,000 ft away.
We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 865XS PRO Gigabit PoE Extender kit, along with its entire product line, in the USA that makes us more responsive to customer needs. We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.
This Enable-IT 865XS PRO Gigabit PoE Extender over copper is trusted Business Reliable Professional Grade Gigabit PoE Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.
Quad port Gigabit PoE LAN switch built into the remote 4-port end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.
Power
Data Rate
Interface
865X PRO CO Dimensions
865XS PRO CPE Dimensions
Environment
Enclosure
Enable-IT Gigabit PoE Extender Kit - Firefold
The Enable-IT 865XS PRO Gigabit PoE Extender kit is an ideal solution to install your IP surveillance cameras, WiFi access points, VoIP phones and other PoE devices where you need, not where you are limited to by false thinking LAN distance restrictions. It can operate up to 3,000ft / 915m from you power and data source and supports any PoE enabled WiFi Wireless Access Point, Security camera or other PoE powered equipment. This eliminates the need for your installers adding power supply outlets and associated AC power cabling, providing an affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.
Using the provided High Powered 60W 56V Injector, a single (120V ~ 240V) IEC 320 C14 standard Country specific power cord input will deliver PoE power sufficient enough to deploy multiple 12V ~ 24V / 6W ~ 30W PoE devices anywhere you need to.
Keep in mind that all DC including (PoE) voltage drops over distance and thicker gauge wire will help this issue. As a rule of thumb you will lose up to 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power strength at distance due to impedance. Lower power strength increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use more pairs or wire or 18 gauge wiring as a dedicated DC power buss – like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our 865XS PRO Gigabit PoE Extender or PoE DSLAM that can power a 56V 60W PoE IP PTZ Camera at 4,000 ft away.
We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 865XS PRO Gigabit PoE Extender kit, along with its entire product line, in the USA that makes us more responsive to customer needs. We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.
This Enable-IT 865XS PRO Gigabit PoE Extender over copper is trusted Business Reliable Professional Grade Gigabit PoE Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.
Quad port Gigabit PoE LAN switch built into the remote 4-port end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.
Power
Data Rate
Interface
865X PRO CO Dimensions
865XS PRO CPE Dimensions
Environment
Enclosure
