Enable-IT 2-Port Outdoor PoE powered 828P - Gigabit PoE over 4-pair wiring
SKU#: 828WP
UPC#:896741002461Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Extends Full Duplex Gigabit Ethernet and PoE SIX TIMES beyond the IEEE barrier of 328ft (100m) with PoE 56V over CAT5e/6 or better wiring.
- Three LAN port design allows for deployment of (2) separate PoE devices up to 800ft (240m) or up to 2,000ft (600m) if used in a series.
- Rapid LAN style installation RJ-45 LAN Interfaces – no programming required.
- Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.
- Cisco / Motorola reverse polarity PoE compatible
- Ideal for deploying High Definition IP Cameras requiring Gigabit throughput at distance.
- Supports VoIP (Voice over IP).
- Network equipment independence – Transparent to protocols, applications and MAC addresses.
- Sustained full-duplex Gigabit Ethernet service delivery end to end.
- Specs+
- Enable-IT 360 56V 61W Gigabit PoE Injector- 120 ~260v AC Input 56V DC 61W Output
- Enable-IT 828WP uses PoE input Power and consumes less than 5v DC at startup and passes the rest through
- Gigabit full-duplex Ethernet Data & PoE (802.3af) or PoE (802.3at)
- Ethernet: (3) LAN RJ-45 Standard 10/100/1000BaseTX, MDI-X, Auto-negotiate ports
- Height 2.0″ (51mm) Depth 11.0″ (280mm) Width 4.5″ (114mm)
- Operational Temperature: -49°F to 168°F (-45°to 76°C)
- Humidity: 5% to 95%, non-condensing
- Ruggedized IP68 Rated mountable casing for durability.
- Package Contents+
- (1) Enable-IT 828WP Outdoor IP68 Rated Waterproof Gigabit PoE Ethernet Extender Unit
- (1) Enable-IT 360 56V 61W Gigabit PoE Injector
- (2) 10′ Black Ethernet patch cords
- (1) Enable-IT 828WP Quickstart Guide
- Reviews+
- Extends Full Duplex Gigabit Ethernet and PoE SIX TIMES beyond the IEEE barrier of 328ft (100m) with PoE 56V over CAT5e/6 or better wiring.
- Three LAN port design allows for deployment of (2) separate PoE devices up to 800ft (240m) or up to 2,000ft (600m) if used in a series.
- Rapid LAN style installation RJ-45 LAN Interfaces – no programming required.
- Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.
- Cisco / Motorola reverse polarity PoE compatible
- Ideal for deploying High Definition IP Cameras requiring Gigabit throughput at distance.
- Supports VoIP (Voice over IP).
- Network equipment independence – Transparent to protocols, applications and MAC addresses.
- Sustained full-duplex Gigabit Ethernet service delivery end to end.
- Enable-IT 360 56V 61W Gigabit PoE Injector- 120 ~260v AC Input 56V DC 61W Output
- Enable-IT 828WP uses PoE input Power and consumes less than 5v DC at startup and passes the rest through
- Gigabit full-duplex Ethernet Data & PoE (802.3af) or PoE (802.3at)
- Ethernet: (3) LAN RJ-45 Standard 10/100/1000BaseTX, MDI-X, Auto-negotiate ports
- Height 2.0″ (51mm) Depth 11.0″ (280mm) Width 4.5″ (114mm)
- Operational Temperature: -49°F to 168°F (-45°to 76°C)
- Humidity: 5% to 95%, non-condensing
- Ruggedized IP68 Rated mountable casing for durability.
- (1) Enable-IT 828WP Outdoor IP68 Rated Waterproof Gigabit PoE Ethernet Extender Unit
- (1) Enable-IT 360 56V 61W Gigabit PoE Injector
- (2) 10′ Black Ethernet patch cords
- (1) Enable-IT 828WP Quickstart Guide
Enable-IT 2-Port Waterproof Gigabit PoE Extension
The Enable-IT™ 828WP Outdoor IP68 Rated Waterproof Gigabit PoE Extension Solution is ideal for installing extended range PoE devices such as PoE VoIP phones, PoE WiFi Access Points, PoE IP cameras, PoE medical equipment, PoE security locks and much more.
At time of ordering the 828WP can be configured to disable PoE output on either or both output ports to enable non PoE LAN devices. Default configuration is PoE output enabled on both ports. These are the world’s 1st and only Waterproof copper Gigabit PoE solution in the industry – from the Inventors of PoE Extender.This weatherproof solution comes with a high powered Enable-IT 360 56V 60W Gigabit PoE Injector. that powers the 828WP Gigabit PoE Extender and your PoE devices with 2-pair and 4-pair PoE power. The single PoE injector can even power up the 828WP and 3 other 828W units and your PoE device up to 2,000ft (600m) all from one 120 ~ 260V AC outlet – Nothing is more cost effective or simple to install.
The three LAN port design allows for deployment of two separate PoE devices. By default both output ports supply PoE power, however the unit can be configured at time of ordering for disabling PoE output on either or both output ports.
The Enable-IT 828WP Outdoor IP68 Rated Waterproof Gigabit PoE Extender is a very cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today. For Gigabit throughput make sure to leverage your existing or new CAT5e or better rated cabling Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.
You can also daisy chain (4) 828W Outdoor IP68 Rated units to reach 2,000ft (600m) to power a PoE devices easily.
Power
Data Rate
Interface
Dimensions
Environment
Enclosure
Enable-IT 2-Port Waterproof Gigabit PoE Extension
The Enable-IT™ 828WP Outdoor IP68 Rated Waterproof Gigabit PoE Extension Solution is ideal for installing extended range PoE devices such as PoE VoIP phones, PoE WiFi Access Points, PoE IP cameras, PoE medical equipment, PoE security locks and much more.
At time of ordering the 828WP can be configured to disable PoE output on either or both output ports to enable non PoE LAN devices. Default configuration is PoE output enabled on both ports. These are the world’s 1st and only Waterproof copper Gigabit PoE solution in the industry – from the Inventors of PoE Extender.This weatherproof solution comes with a high powered Enable-IT 360 56V 60W Gigabit PoE Injector. that powers the 828WP Gigabit PoE Extender and your PoE devices with 2-pair and 4-pair PoE power. The single PoE injector can even power up the 828WP and 3 other 828W units and your PoE device up to 2,000ft (600m) all from one 120 ~ 260V AC outlet – Nothing is more cost effective or simple to install.
The three LAN port design allows for deployment of two separate PoE devices. By default both output ports supply PoE power, however the unit can be configured at time of ordering for disabling PoE output on either or both output ports.
The Enable-IT 828WP Outdoor IP68 Rated Waterproof Gigabit PoE Extender is a very cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today. For Gigabit throughput make sure to leverage your existing or new CAT5e or better rated cabling Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.
You can also daisy chain (4) 828W Outdoor IP68 Rated units to reach 2,000ft (600m) to power a PoE devices easily.
Power
Data Rate
Interface
Dimensions
Environment
Enclosure
