All

PureLink DVI over CATx Extension System

The PureLink DCE II Tx/Rx DVI over CATx Extension System enables lossless DVI video transmission up to 220 feet using a single category cable. The active receiver uses the source device's power, so no external power source is required. This kit includes both the transmitter and receiver for a complete solution. Just add cables!

$219.99

Techlogix Networx TL-FO-DVI DVI over Fiber Optic Cable Extender

Techlogix Networx DVI over Fiber Optic Cable Extender

DVI cables are great for transmitting digital video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long DVI cable or connecting multiple DVI cables together can cause signal drop out, interference, pixelization, and a host of other signal and performance problems.

The TL-FO-DVI replaces a traditional DVI cable with active electronics designed specifically for sending video signals up to 1,000 feet. Simply connect the TL-FO-DVI transmitter to your source device (often a switcher, matrix, video processor or computer), connect the TL-FO-DVI receiver to your destination device (often a display or projector), connect the two units with a fiber optic patch cord (sold separately), and connect the power supplies.

Unlike boosters or twisted pair extenders, the TL-FO-DVI uses fiber optic technology that is immune to outside electrical interference and will better future-proof your facility.

$711.16

PureLink AV DVI/VGA and USB/KVM over IP Receiver/Decoder

Need a way to incorporate audio/video, RS-232, IR, USB, and matrix switching capabilities to your IP network? Look no more! The VIP-200H from PureLink AV allows you to add all of these features with point-to-point extension up to 590 feet, or 180 meters. You can also take advantage of point-to-many and many-to-point via the feature rich VIP IP Video Management Software.

General Technical Specifications
Supported Resolution	Up to 1920 x 1200
Supported Distance	Using Cat5E: 492ft (150m); Using Cat6: 590ft (180m)
Connector Types	4x USB Type A, 1x RS232 (DB9 Female), 1x DVI-I (Output), 1x 15-Pin Mini D-sub (Output), RJ45
Audio Connector	1x 3.5mm Phone Jack (10KΩ / 1Vpp)
IR Receiver (Internal)	30-60Khz / ±45° / 5M
IR Emitter (External)	3.5mm Stereo Phone Jack
Power Supply	DC 5V 2A
Power Consumption	750mA (Typical) / 1000mA (Max)
Dimensions	6.57 x 4.15 x 1.57" (167 x 105.5 x 40mm)
Weight	1.01lbs (460g)
Distribution	Point-to-point: 590ft KVM Extender Distribution: (1) TX to 154+ RX Switching: Up to 100 TX to (1) RX Matrix: Up to 100 TX to 154+ RX

$499.99

PureLink AV VGA and USB/KVM over IP Transmitter/Encoder

Need a way to incorporate audio/video, RS-232, IR, USB, and matrix switching capabilities to your IP network? Look no more! The VIP-200H from PureLink AV allows you to add all of these features with point-to-point extension up to 590 feet, or 180 meters. You can also take advantage of point-to-many and many-to-point via the feature rich VIP IP Video Management Software.

General Technical Specifications
Supported Resolution	Up to 1920 x 1200
Supported Distance	Using Cat5E: 492ft (150m); Using Cat6: 590ft (180m)
Connector Types	1x USB Type B, 1x RS232 (DB9 Female), 1x 15-Pin Mini D-sub (Input), 1x 15-Pin Mini D-sub (Loop Output)
Audio Connector	1x 3.5mm Phone Jack (10KΩ / 1Vpp)
IR Receiver (Internal)	30-60Khz / ±45° / 5M
IR Emitter (External)	3.5mm Stereo Phone Jack
Power Supply	DC 5V 2A
Power Consumption	750mA (Typical) / 1000mA (Max)
Dimensions	6.57 x 4.15 x 1.57" (167 x 105.5 x 40mm)
Weight	1.01lbs (460g)
Distribution	Point-to-point: 590ft KVM Extender Distribution: (1) TX to 154+ RX Switching: Up to 100 TX to (1) RX Matrix: Up to 100 TX to 154+ RX

$499.99

PureLink AV DVI and USB/KVM over Transmitter/Encoder

Need a way to incorporate audio/video, RS-232, IR, USB, and matrix switching capabilities to your IP network? Look no more! The VIP-200H from PureLink AV allows you to add all of these features with point-to-point extension up to 590 feet, or 180 meters. You can also take advantage of point-to-many and many-to-point via the feature rich VIP IP Video Management Software.

General Technical Specifications
Supported Resolution	Up to 1920 x 1200
Supported Distance	Using Cat5E: 492ft (150m); Using Cat6: 590ft (180m)
Connector Types	1x USB Type B, 1x RS232 (DB9 Female), 1x DVI-I (Input), 1x DVI-I (Loop Output), 1x RJ45
Audio Connector	1x 3.5mm Phone Jack (10KΩ / 1Vpp)
IR Receiver (Internal)	30-60Khz / ±45° / 5M
IR Emitter (External)	3.5mm Stereo Phone Jack
Power Supply	DC 5V 2A
Power Consumption	750mA (Typical) / 1000mA (Max)
Dimensions	6.57 x 4.15 x 1.57" (167 x 105.5 x 40mm)
Weight	1.01lbs (460g)
Distribution	Point-to-point: 590ft KVM Extender Distribution: (1) TX to 154+ RX Switching: Up to 100 TX to (1) RX Matrix: Up to 100 TX to 154+ RX

$499.99

PureLink DVI to 2 LC Fiber Extender Kit

The PureLink OLC II Tx/Rx DVI to 2 LC Fiber Extender Kit extends a 1080p DVI signal up to 6500ft using a single mode fiber optic cable. With the automatic EDID management, a separate DDC connection is not required, simplifying cable management. These detachable units also make it easy to run fiber cables through conduit or tight spaces before and after installation. The transmitter and receiver connect directly to the source and display devices.

$1,319.99

PureLink 4 LC Fiber Optic to DVI Receiver

$599.99

PureLink DVI to 2 LC Fiber Receiver Unit

The PureLink OLC II Rx DVI to 2 LC Fiber Receiver Unit extends a 1080p DVI signal up to 6500ft using a single mode fiber optic cable. With the automatic EDID management, a separate DDC connection is not required, simplifying cable management. These detachable units also make it easy to run fiber cables through conduit or tight spaces before and after installation. The receiver connects directly to the display device.

$759.00

PureLink DVI to 2 LC Fiber Transmitter Unit

The PureLink OLC II Rx DVI to 2 LC Fiber Receiver Unit extends a 1080p DVI signal up to 6500ft using a single mode fiber optic cable. With the automatic EDID management, a separate DDC connection is not required, simplifying cable management. These detachable units also make it easy to run fiber cables through conduit or tight spaces before and after installation. The transmitter connects directly to the source device.

$759.00

Filter

Brands

Home Theater Type

Price Range

Filter

Brands

Home Theater Type

Price Range

Techlogix Networx DVI over Fiber Optic Cable Extender