All

Platinum Tools PoE Detector

The Platinum Tools pocket-size PoE Detector detects PoE end/mid-span voltages on network cables. LED indicators instantly show “GO/NO-GO” detection on PoE networks. Plug cables directly into the built-in RJ45 jack or use the included patch card to detect voltage in wall jacks. Differentiates between end-span PoE power which is supplied from PoE switches or routers and mid-span voltage from injectors. End-span detection indicate voltages are found on pairs 1/2, 3/6; mid-span detection indicates voltages found on pairs 4/5, 7/8.

Platinum Tools Cat5E EZ-RJ45 Connector

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100003C is a pack of Cat5E EZ-RJ45 connectors for Cat5E installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a Cat5E Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Platinum Tools Cat6 RJ45 EZ-RJ45 Connector 100 Pack

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is critical to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer, and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100010B is a 100-pack of Cat6 EZ-RJ45 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a Cat6 Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pin-out has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Platinum Tools Jacket Stripper

This economical tool has been specifically designed to strip the cable jackets from Category 5/5e/6 twisted pair cables. No adjustments are required and will not nick the inner conductors. The durable high-impact plastic housing is molded from yellow plastic to make it easier to locate. Long-life blade.

Platinum Tools Shielded Cat5E & Cat6 RJ45 EZ-RJ45 Connector

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100020 is the single shielded EZ-RJ45 connector. They are fully foil-shielded with an internal ground for interference-sensitive installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a shielded Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Platinum Tools EXO Crimp Frame With EXO-EX Die

The Platinum Tools 100061C EXO™ Crimp Frame with EXO-EX Die™ features an interchangeable and reversible die set and push lock button for easy storage. Part of the ezEX-RJ45 termination system, the 100061C helps maneuver the challenges of ever-increasing cable and insulation diameters which may vary by manufacturer. It's designed for use with ezEX™44 and 48 connectors. The unique design of these connectors accommodates larger cable diameters, as well as makes sequence verification easier through the one-piece pass-through body. This crimp frame allows quick, secure termination and flush trim with a single cycle. The reversible EXO die enables ambidextrous operation with ergonomic TPR handles for comfort.

Platinum Tools BR1 Multi-Stripper

The "Big Red" BR1 Multi-Stripper from Platinum Tools covers a wide array of cables for voice, video, and data. It's designed for professional installers, but still easy to use.

• Coax cassette blades are pre-set for: RG59 CCTV; RG6 and RG6 Quad; RG7/11
• Adjustable stripper for twisted pair: Twisted Pair (Data) PVC & Plenum: Cat3/4; Cat5e shielded; Cat6; Cat6 shielded; Cat6A shielded
• Also works with Telephone & Audio (Voice) Round cables
• Cutters for both cable & wire conductors; not for steel
• Includes braid comb, Velcro, for folding the braid back over the cable jacket
• Replacement cassettes available

Platinum Tool Cat6 ezEX™44 ezEX-RJ45® Connector

The Platinum Tools 202044J Cat6 ezEX™44 ezEX-RJ45® Connector is manufactured to provide easy termination when crimped onto Cat6 structured cabling. The unique design makes it easy to verify wiring sequences before terminating and allows larger conductors to pass through the front end. The integrated Hi-Lo stagger load bar isolates each conductor for higher performance.

ezEX™44 - ezEX-RJ45® connectors are made in the USA with high quality, American-made workmanship. This 100 pack comes in a resealable plastic jar for easy storage and portability.

These connectors are designed for use with the EXO™ Crimp Frame and EXO-EX Die (100061C).

Package Includes

• (100) Platinum Tools ezEX™44 - ezEX-RJ45® Connectors in Plastic Jar

Platinum Tools EZ-RJPRO HD Crimp Tool

The EZ-RJPRO HD Crimp Tool is designed for the professional installer providing a ratcheted, high leverage, ultra-stable platform for consistent, repeatable terminations. This heavy-duty tool is the perfect solution when working with high-performance, larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation on the conductors, and pair separating splines. Not only will you overcome these connectivity obstacles but you can be assured that every termination will meet FCC specifications. Compatible with all EZ-RJ45® and EZ-RJ12/11 connectors as well as all standard modular plugs, except AMP.

Applications

The EZ-RJPRO HD Crimp Tool uses the EZRJ45 patented 'crimp & trim' system and is designed to handle larger dimensional size cables. EZ-RJ45 CAT 5E connectors / EZ-RJ45 Shielded CAT 5E connectors / EZ-RJ45 CAT 6+ connectors / EZ-RJ45 Shielded CAT 6 connectors / EZ-RJ12/11 connectors / Compatible with all other RJ45, RJ12 and RJ11 modular plug connectors except AMP.

Platinum Tools Cat6A ezEX™48 ezEX-RJ45® Connector

The Platinum Tools 202048J Cat6A ezEX™48 ezEX-RJ45® Connector is manufactured to provide easy termination when crimped onto Cat6A structured cabling. The unique design makes it easy to verify wiring sequences before terminating and allows larger conductors to pass through the front end. The integrated Hi-Lo stagger load bar isolates each conductor for higher performance.

ezEX™48 - ezEX-RJ45® connectors are made in the USA with high quality, American-made workmanship. This 100 pack comes in a resealable plastic jar for easy storage and portability.

These connectors are designed for use with the EXO™ Crimp Frame and EXO-EX Die (100061C).

Platinum Tools ezEX 48 Shielded CAT6A Connector

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6A and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Platinum Tools EXO Crimp Frame With EZ-RJ45® Die

The Platinum Tools 100062C EXO Crimp Frame™ with EZ-RJ45® Die features an interchangeable and reversible die set and push lock button for easy storage. Part of the ezEX-RJ45 termination system, the 100062C helps maneuver the challenges of ever-increasing cable and insulation diameters which may vary by manufacturer. It's designed for use with EZ-RJ45 Cat5E, Cat6, and Cat6A connectors. The unique design of these connectors accommodates larger cable diameters, as well as makes sequence verification easier through the one-piece pass-through body. This crimp frame allows quick, secure termination and flush trim with a single cycle. The reversible EXO die enables ambidextrous operation with ergonomic TPR handles for comfort.

Platinum Tools EZ-RJ11/12 Connectors

Platinum Solutions

As anyone who has ever planned their network knows, terminating voice cables isn’t necessarily hard. It can be a tedious process, though, and it is critical to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100026B is a 100-pack of EZ-RJ11/12 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ crimp tool.

The Difference

The initial steps for adding an EZRJ11/12 connector onto a Cat3 cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ tool will crimp and cut away the extra wire all in one squeeze.

Platinum Tools EZ-RJ45 Strain Relief Boots - FireFold

Platinum Solutions

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100035 is a 50-pack of EZ-RJ45 Cat5E strain-relief boots. These boots can only be used with EZ-RJ45 Cat5E connectors. When used with a connector, they help protect the cable from snags and relieve stress from bends and pressure.

The Difference

The initial steps for adding an EZ-RJ45 connector onto an Ethernet cable is the same. Slide the 100035 strain relief boot onto the cable as soon as you slip off the length you want. The unique design of these boots locks to the EZ-RJ45 end for easy all-at-once connections. Remove an inch and a half of the jacket. Untwist the pairs and line them up according to your chosen wiring diagram. Then insert the cable into the EZ-RJ45 connector, which is sold separately. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Platinum Tools ezEX-RJ45 Shielded CAT6 Connector

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with CAT6 and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Platinum Tools 100026C Connectors 50pk - FireFold

Platinum Solutions

As anyone who has ever planned their own network knows, terminating voice cables isn’t necessarily hard. It can be a tedious process, though, and it is important to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100026C is a 50-pack of EZ-RJ11/12 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ crimp tool.

The Difference

The initial steps for adding an EZRJ11/12 connector onto a Cat3 cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can easily check to make sure the correct wire pin-out has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ tool will crimp and cut away the extra wire all in one squeeze.

Platinum Tools Standard HPH J-Hooks 25 Pack (1-4in)

The High Performance J-Hooks are built with steel J-Hooks over-molded with polypropylene for an easy cable slide. The “Snap-Lock” Retainer is easy to use and re-use, firmly securing cables every time and eliminating the use of cable and Velcro ties. Each J-hook has a 2” wide base support, to prevent cable kinks. They’re cULus listed, Plenum rated, RoHS compliant, and are available in 1”, 2”, 3”, and 4” sizes, along with a variety of hardware accessories for all of your cable management needs.

Platinum Tools All-In-One Modular Plug Crimp Tool

Three crimp cavities for 4,6,8 position modular plugs. Built in cutter and two strippers for both round and flat cable. Manufactured to provide precise, repeatable and reliable terminations every time...for a very long time.

Application

• RJ45 Cat3/5/5e/6 (8x8)
• RJ12, 6 position (6x6)
• RJ11, 4 position (6x4)
• RJ11, 2 position (6x2)
• RJ22, 4 position (4x4)

Platinum Tools PTS PRO Crimp Tool

The PTS (Pass Through Standard) Pro Crimp Tool takes years of Platinum Tools innovations and combines multiple tools into one sleek design. The PTS Pro allows the termination of both ezEX-RJ45 Connectors and the legacy EZ-RJ45 connectors in a single tool with no part changes. The tool utilizes a sliding plate to change between the different types of connectors and a captive thumb screw to make swapping between connector styles seamless. The tool features a connector locking mechanism so connectors “click” into the tool for termination. This tool also includes the cutting and stripping blades for Cat5e and 6 built directly into the handle. A single tool for all the Platinum Tools terminations.

Platinum Tools Micro Mini II Screwdriver Set

The Micro Mini II Screwdriver Set features a combination of the smallest popular bits used in today's electronics. The soft grip TPR handle has a non-mag, 4 mm, bit holder that adjusts from 5" to 8".

Platinum Tools ezEX™44 Shielded CAT6 Connector

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with CAT6 and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Platinum Tools Shielded EZ-RJ45 Connectors

Platinum Tools EZ-RJ45 connectors are known for simplifying twisted pair terminations. The unique patented design allows you to insert the wires through the connector and out of the front, enabling easy wiring sequence verification. These 100023C connectors are intended specifically for applications requiring shielded cable and connectors.

These connectors are built on the Cat6 framework, so they are compatible with both Cat5E and Cat6 cable. This external ground design can accommodate wires up to 0.280 inch in diameter.

Platinum Tools Cat6A Flex Connector

Flex Connector makes network cable terminations easier than ever. The unique patented design ensures top tier performance for Cat5e/6/6A/7 cabling. These connectors provide a low cost, easy termination solution with high performance and superior connectivity options.

Platinum Tools Replacement Blades For EZ-RJPRO

This ten pack of replacement blades is designed for use with the EZ-PRO HD Crimp Tool from Platinum Tools. They fit the die cavity on the tool, ensuring it neatly trims the wire from the ends of your connectors for crisp, clean crimps every time. Check out the video below to see how easy it is to change these blades!

Platinum Tools Pro Drywall Saw

The blade extra thick (1.8mm) to prevent bending and breaking during use, whether cutting, punching or scoring.

Platinum Tools ezEX™48 Shielded CAT6A Connector

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6A and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Platinum Tools ProStrip 10/20 Wire Stripper

Designed to meet the demanding expectations of professionals. These wire strippers deliver performance, comfort and consistent, reliable results. The tools can be used left or right handed - wire sizes are marked on both sides. Ergonomically designed handles require less hand force. The curved cutting blades ensure cleaner, precise cuts. Color-coded for quick identification.

Platinum Tools ezEX™44 Shielded CAT6 Connector

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with CAT6 and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

This ezEX™48 Connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows larger conductors to pass through the front end of the connector. Making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6A and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Platinum Tools ezEX™44 - ezEX-RJ45® CAT6 Connector

This RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Platinum Tools Tele-Titan Xg 2.0 Cat6A/10Gig Crimp Tool

The Platinum Tools Tele-Titan Xg 2.0 Cat6A/10Gig Crimp Tool is engineered specifically for use with Cat6A 10Gig connectors. It can also be used with standard RJ12/11 plugs. The rugged, compact design is intended for repeated installations, and it has a non-slip handle and finger grooves for added comfort. An innovative gun-style lock keeps the tool securely closed during storage.

The increased efficiency of not having to change out tools during the process makes this RJ45 crimper a must-have for your tool box. You'll make sure you're achieving superior 10Gig performance with every termination.

Application:

• RJ45 CAT6A/10Gig Shielded RJ45 connectors
• CAT6e, CAT6A, CAT7 & over-sized CAT5e/6 industrial Ethernet cables
• Standard RJ12/11 connectors

Platinum Tools Double Ended Coax Stripper

Simple, compact, and lightweight. This Platinum Tools Double Ended Coax Stripper does the job with ease. It creates a 1/4" braid, 2-level strip, which is the standard for compression connectors. No adjustments are required, and the cutting depth is controlled by the number of rotations around the cable.

Platinum Tools RJ45 CAT6A 10Gig Shielded Connector

Streaming media whether data, audio or video, is on a sharp rise and users are demanding more bandwidth. That means bigger cable, commonly referred to as CAT6e, CAT6A and CAT7, and usually shielded. For maximum performance, connector and crimp tool choice is critical. Our CAT6A/10Gig termination system not only meets, but exceeds these requirements.

Connector is only compatible with Platinum Tools Tele-TitanXg™ and Tele-TitanXg™ 2.0 Crimp Tool. Please see related products.

Platinum Tools Punchdown Blade, NEVERDull, 66 Style

Increase productivity and reduce costs by upgrading to the NEVERDullTM Blades. These high-performance blades stay sharper longer than traditional ones. Pop one in the PRO-StrikeTM punch-down tool and no termination job will be too tough.

Two sets of replacement blades for the BR1 Multi-Stripper, known as the "Big Red".

Platinum Tools 16213C SealSmart PROCON Compression Tool

The SealSmart PROCON Compression Tool from Platinum Tools is designed to provide quick, reliable results every time. It's easy to use, tough and durable, and engineered for a long lifetime of use. Great for professional contractors installing CATV and CCTV networks. The patented rotating connector positioner allows quick changing between RG-7/11 and RG-59/6.

APPLICATION

• CATV
• CCTV
• Satellite
• Security
• Home Theater
• Residential and commercial structured wiring

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with CAT6 and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Platinum Tools Tele-Titan Modular Plug Crimp Tool

Reliability and durability combine in the Tele-Titan Modular Plug Crimp Tool from Platinum Tools. This lightweight wire crimper is compact, at about half the size of standard crimpers, yet the rugged design is built for repeated installations. It locks securely in place when closed so it doesn't come open during storage.

The innovative part of the Tele-Titan crimping tool is that it works like a coax compression tool, delivering straight or parallel action termination. It puts even pressure on each of the plug's pin to ensure precise termination every time. It features embedded wire strippers for round and flat cables and a built-in cable cutter. You can easily adjust the depth of the blade while stripping Cat5E or Cat6 cable with this RJ45 crimper.

*Not for use on AMP/TYCO style plugs.

Platinum Tools Cable Remote Cable Tester Smart Remote Kit

Note: The T139 variant has been discontinued.

Maximize efficiency and save time, by eliminating the need to walk back & forth with multiple remotes to test sites. Combine this kit with your Platinum Tools cable tester. 'Test' & 'Map/ID' up to eight drops/locations. Smart Remotes are a 'smarter' way to go!

Platinum Tools ezEX Starter Kit

The ezEX Starter Kit gives you everything you need to start using Platinum's most advanced connector - the ezEX RJ45®. The kit includes the EXO™ Crimp Frame with EX Die for perfect crimps and clean trims every time, as well as a complete assortment of ezEX connectors and strain reliefs, all at a very special price. The ezEX is the most modern RJ45 connector design that will handle the widest variety of cable sizes while offering Cat5e, Cat6 and Cat6A compatibility at speeds up to 10Gb. It is also the only one-piece connector we make that is certified for use in PoE and PoE+ applications.

TelScope Test Set, TLA300-1

The TelScope is the first true 21st century telecommunication line analyzer setting a new standard for POTS butt sets. It is a field instrument that delivers more information of online conditions & status than any other test set on the market, anywhere in the world!!

• Large backlit display for low light environments
• Glow-in-the-dark keypad
• Advanced data detection & identification
• 100% Data Safe
• Rugged weatherproof case, IP54 Standard
• Drop Proof (Tested at 20ft)

PlatinumTools Beam Clamp 1/8" - 1/2" for BR, 100/Box

Accommodates beam flange from 1/8" to 1/2" thickness, standard 1/4-20 or #10-24 threaded bridle rings, standard drive rings as well as unthreaded rings

PlatinumTools Beam Clamp 1/8" - 1/2", 100/Box

Hang ceiling wire & jack chain, threaded rod and eye lag screws. Our hardware is designed for the most efficient, secure and cost effective hanging hardware solutions.

PlatinumTools Rt Angle Clip, 1/4-20 with Powder Actuated Nail - 100/Box

Hang ceiling wire & jack chain, threaded rod and eye lag screws. Our hardware is designed for the most efficient, secure and cost effective solution.

Platinum Tools Fiber Optic Cleaners

Easy-to-use pen style cleaners for most fiber optic cables - just push to clean. Works with virtually all common fiber optic sizes and connector types, allowing you to clean connectors and ports for the best possible optical performance. Just push to effortlessly clean fiber ends. Available in two sizes with color-coded tips for easy ID.

Flex Connector makes network cable terminations easier than ever. The unique patented design ensures top tier performance for Cat5e/6/6A/7 cabling. These connectors provide a low cost, easy termination solution with high performance and superior connectivity options.