$100 to $200

Constructed of heavy duty 1.5” wide structural steel and covered in a dual-layer of sturdy black powder coat, the CLB is built to last through installation and decades of use. They are UL listed and rated for a weight limit of 187lbs per foot. The open arrangement also allows easy access for routine maintenance, cleaning, and troubleshooting. Middle Atlantic’s legacy is one of quality and professionalism, and these cable ladders come with the assurance of a lifetime limited warranty against any manufacturer defects.

The CLB cable ladder can be combined with a new or pre-existing ladder and structural elements and it is compatible with many major brands of networking and installation accessories. Different lengths and widths are available from Middle Atlantic, as well as bends, corners, and sections with adjustable rungs. All ladder sections and accessories can be mixed and matched for the perfect configuration.

Vertical Cable Manager for 2-Post Racks, Dual-Sided Duct

Designed for use with Quest seven foot open frame two post racks, the VR-07-140 Vertical Cable Manager has a cable capacity of up to 140 cables (70 each side). It has a sturdy steel mounting plate with a black micro finish and comes complete with mounting hardware.

Vertical Cable 45U Vertical Cable Manager – Double Sided

Compatible with Vertical Cable Relay Racks:

SKU: 047-WPR-0207, 047-WOS-0220, 047-WOS-0245, 047-WOS-0445

Vertical Cable 45U Vertical Cable Manager

Vertical Cable 047-VMF-4501 45U Vertical Cable Manager – Single Sided

Compatible with Vertical Cable Relay Racks:

PATCHBOX Frame

This Vertical Cable Manager is sure to give your installation a clean and finished look. The base material of the manager is 2 mm aluminium that is painted in black electrostatic microfinish. The cable manager comes in a height of 6'.

Ultra-Durable Organizer Tabs

Designed to route cables running into the rack, passing them along to the patch panel, the organizer tabs are flexible, making it quick and ease to organize and pass cables through, while at the same time being extremely durable and able to withstand plenty of heavy use.

Closed Design

Whether you've completed your cable run, or plan to return to the job first thing in morning, the Closed Design is perfect for any install. The heavy-plastic cover is built to conceal all ran cables, and detaches and reattaches to the organizer in seconds. The organizer also comes with plenty of space beneath the plastic cover to maintain a required bend radius for network cabling, preventing any signal loss

This Vertical Cable Manager is sure to give your installation a clean and finished look. The base material of the manager is cold rolled steel 18 AWG that is painted in black electrostatic microfinish. The hooks that support the cables are made of highly resistant nylon that can hold up to 50 cables. The cable manager comes in either a height of 6'.

Open Design

Built for ease of use, the Open Design is ideal for jobs where several cables will be pulled in and out of the server rack. The open nylon hooks allow for smooth drops when doing cable runs and are made of highly resistant nylon which able to hold up to 50 cables.

18 AWG Cold Rolled Steel

For this particular Vertical Cable Manager, the thickness is measured by AWG. A measurement of 18 AWG is equal to about 0.0478 Inches

The Middle Atlantic Horizontal Lacer Bars are a simple and econonomical solution to providing effective cable management in your rack or enclosure. The horizontal lacer bars has a 19" width, ands fits neatly into most racking. When running patch cables throughout your rack, the Middle Atlantic lacer bars become invaluable.

The Middle Atlantic Horizontal Lacer Bars are a simple and economical solution to providing effective cable management in your rack or enclosure. The horizontal lacer bars has a 19" width, and fits neatly into most racking. When running patch cables throughout your rack, the Middle Atlantic lacer bars become invaluable.

Under the Wire

Cable ladders are a type of cable tray, especially valued over conduit in installations where future changes or upgrades are anticipated. Rather than navigating new wires through a pipe, cables can simply be laid down and left in place. This cable ladder system is sold in pieces to allow for easy shipping, maneuvering, and complete customization. The Middle Atlantic CL Series CLB-VI90 is a vertical inside bent section of cable ladder, available in widths of 12, 18 and 24 inches.

The Highest Rung

Constructed of heavy duty 1.5” wide structural steel and covered in a dual-layer of sturdy black powder coat, the CLB-VI90 is built to last through installation and decades of use. They are UL listed and rated for a weight limit of 187lbs per foot. The open arrangement also allows easy access for routine maintenance, cleaning, and troubleshooting. Middle Atlantic’s legacy is one of quality and professionalism, and these cable ladders come with the assurance of a lifetime limited warranty against any manufacturer defects.

The CLB-VI90 90 degree cable ladder can be combined with a new or pre-existing ladder and structural elements and it is compatible with many major brands of networking and installation accessories. Different lengths and widths are available from Middle Atlantic, as well as bends, corners, and sections with adjustable rungs. All ladder sections and accessories can be mixed and matched for the perfect configuration.

Middle Atlantic LBP-1R4 Round Lacer Bar, 4 Inch Offset, 10 Pack

Use the LBP-1.5 & LBP-1R4 when lacing small bundles or individual cables off the rear of equipment, patch panels and other components to relieve cable stress from the connections. Choose the appropriate offset based on the distance from the rear of equipment to the rackrail. 1/4” diameter rod with flattened ends.

Simplify and Streamline Cable Management with Neat-Patch's All-in-One Kit

Unparalleled Convenience, Time-Saving, and Eco-Friendliness.

The convenience of having the cables and cable manager combined in one kit is unparalleled. Not only does it streamline the cable management process, but it also offers significant advantages in terms of shipping, time-saving, and environmental impact. With everything included in a single kit, the shipping process becomes more efficient, saving both time and money. Instead of dealing with multiple bags and twist ties, users only need to open two bags, saving valuable time and reducing frustration. Moreover, the environmental impact is greatly reduced by eliminating the need for 48 individual bags and twist ties. Opting for one plastic bag instead of 48 contributes to a more sustainable approach and reduces plastic waste. Experience the convenience, efficiency, and eco-friendliness of Neat-Patch's all-in-one cable management kits and enjoy a simplified cable organization process like never before.

The CLH-ED series from Middle Atlantic offers an easy solution to allowing cable to drop down in a neat and organized way. The CLH-ED series from Middle Atlantic is compatible with all CLB Series Cable Ladders

Caddy Sn Flanged Nut, 3/8" Rod

The Middle Atlantic CLH-RWC Ladder Clamps offer a convenient way to expand your cable-management in a number of possibilities. With the Middle Atlantic CLH-RWC you can easily mount any CLB Series Cable Ladder directly to the wall. The CLH-RWC is also available in individual pairs.

The Middle Atlantic CLB-TSB series offers you a support bracket that will allow you to mount most popular brands of cable ladder directly along a wall. The CLB-TSB is offered in three different sizes to accommodate 12" Cable Ladders, 18" Cable Ladders and 24" Cable Ladders and accessories. The highly scratch resistant powder coated bracket can support up to 187lbs of cabling and accessories per foot. The CLB-TSB series from Middle Atlantic is perfect for both new and existing installations and applications.

The Middle Atlantic Horizontal Lacer Bars are a simple and economical solution to providing effective cable management in your rack or enclosure. The horizontal lacer bars has a 19" width, ands fits neatly into most racking. When running patch cables throughout your rack, the Middle Atlantic lacer bars become invaluable.

Caddy Metal Pressure Clip, 16 Cable, 0.28" Hole

Simplify and Streamline Cable Management with Neat-Patch's All-in-One Kit

Unparalleled Convenience, Time-Saving, and Eco-Friendliness

The convenience of having the cables and cable manager combined in one kit is unparalleled. Not only does it streamline the cable management process, but it also offers significant advantages in terms of shipping, time-saving, and environmental impact. With everything included in a single kit, the shipping process becomes more efficient, saving both time and money. Instead of dealing with multiple bags and twist ties, users only need to open one bag, saving valuable time and reducing frustration. Moreover, the environmental impact is greatly reduced by eliminating the need for 24 individual bags and twist ties. Opting for one plastic bag instead of 24 contributes to a more sustainable approach and reduces plastic waste. Experience the convenience, efficiency, and eco-friendliness of Neat-Patch's all-in-one cable management kits and enjoy a simplified cable organization process like never before.

Kendall Howard 5" D Flanged Lacing Bar

Properly manage and protect your cables with the Kendall Howard 5" D Flanged Lacing Bar. Its size and versatility make this a true space-saving cable manager. Designed to mount above, below, behind, or in front of your network devices, the 5" D Flanged Lacing Bar allows you to do more by using less space. And that's not all. It also provides a much-needed stress relief for cable connections. Crowded spaces, unorganized cables, and strained connections are no longer an issue with the Kendall Howard 5" D Flanged Lacing Bar.

• Quantity: 10
• 5" depth
• Features ½" slots to use with any ½" cable ties
• Uses less than one U space, or none at all if mounted in front of or behind equipment
• Versatile, horizontal mounting
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard 3" D Flanged Lacing Bar

Save space and time while managing your network cables with the Kendall Howard 3” Depth Flanged Lacing Bar. Designed to mount above, below, behind, or in front of your network devices, the 3” Depth Flanged Lacing Bar allows you to do more by using less space. It provides much-needed stress relief for cable connections. Stress no more about crowded areas, unorganized cables, and strained connections with the Kendall Howard 3” Depth Flanged Lacing Bar.

• Quantity: 10
• 3" depth
• Features ½" slots to use with any ½" cable ties
• Uses less than one U space, or none at all if mounted in front of or behind equipment
• Versatile, horizontal mounting
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard Flanged Lacing Bar

Properly manage and protect your cables with the Kendall Howard Flanged Lacing Bar. Its size and versatility make this a true space-saving cable manager. Designed to mount above, below, behind, or in front of your network devices, the Flanged Lacing Bar allows you to do more by using less space. And that's not all. It provides a much-needed stress relief for cable connections and works well when routing just a few cables between switches and patch panels. Crowded spaces, unorganized cables, and strained connections are no longer an issue with the Kendall Howard Flanged Lacing Bar.

• Quantity: 10
• Features ½" slots to use with any ½" cable ties
• Versatile, horizontal mounting
• Uses less than one U space, or none at all if mounted in front of or behind equipment
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

ICC Ladder Rack Butt Splice Kit in 10-Pack

ICC’s butt splice is designed to join ladder rack runway sections together at the ends. The ladder rack butt splice is made with 9 gauge cold-rolled steel (CRS) for durability. It is black powder coated to create a hard finish that is tougher than conventional paint. The butt splice comes in a bulk 10-pack for easy storage. ICC’s butt splice works with the following ladder rack products: 5 feet runway, 10 feet runway, 90-degree flat turn, 90-degree inside corner, 90-degree outside corner, and 5 feet rack-to-wall kit.

Middle Atlantic Forward D Style Ring Cable Management

The new Forward cable management products give you the flexibility you need to get your cables from Point A to Point B. Install on Forward Rack Rail, Lever Lock™; and anywhere the patented universal hole pattern is found.

Middle Atlantic Forward C Style Ring Cable Management

Limitless cable routing. The new Forward cable management products give you the flexibility you need to get your cables from Point A to Point B with C Rings, D Rings and Tie saddles. Install on Forward Rack Rail, Lever Lock™; and anywhere the patented universal hole pattern is found.

Middle Atlantic Forward Hook & Loop Tie Saddles

The new Forward cable management products give you the flexibility you need to get your cables from Point A to Point B. Install on Forward Rack Rail, Lever Lock™; and anywhere the patented universal hole pattern is found.

Middle Atlantic Forward Small Device Mounting Clamps

Secure your small, non-rackmount devices to any place the patented universal hole pattern is found. Simply pop the clamp into slot, twist to lock it in place and push the clamp down. No more fumbling with tiny hardware, cable zip ties, double sided tape or bubble gum.

The Middle Atlantic Vertical Lacer Strips are a simple and economical solution to providing effective cable management on your rack or enclosure. The Middle Atlantic Vertical Lacer Strips with Tie Posts gives you the ability to fasten your bundled cables without untying the straps.

The 3.25"W Lacer Strips with Tie Posts are available in 44 rack units, 40 rack units, 37 rack units, 23 rack units and 13 rack units.

The CLH-ED series from Middle Atlantic offers an easy solution to allowing cable to drop down in a neat and organized way. The CLH-ED series from Middle Atlantic is compatible with all CLB Series Cable Ladders.

The Middle Atlantic CLB-CSB series offers you a support bracket that allows for extra center support and stability. The CLB-TSB is offered in three different sizes to accommodate 12" Cable Ladders, 18" Cable Ladders and 24" Cable Ladders and accessories. The highly scratch resistant powder coated bracket can support up to 187lbs of cabling and accessories per foot. The CLB-CSB series from Middle Atlantic is perfect for both new and existing installations and applications.

The Middle Atlantic CLB-CSB series offers you a support bracket that allows for extra center support and stability. The CLB-TSB is offered in three different sizes to accommodate 12" Cable Ladders, 18" Cable Ladders, 24" Cable Ladders and accessories. The highly scratch resistant powder coated bracket can support up to 187lbs of cabling and accessories per foot. The CLB-TSB series from Middle Atlantic is perfect for both new and existing installations and applications.

The Middle Atlantic CLB-TSB series offers you a support bracket that will allow you to mount most popular brands of cable ladder directly along a wall. The CLB-TSB is offered in three different sizes to accommodate 12" Cable Ladders, 18" Cable Ladders and 24" Cable Ladders and accessories. The highly scratch resistant powder coated bracket can support up to 187lbs of cabling and accessories per foot. The CLB-TSB series from Middle Atlantic is perfect for both new and existing installations and applications.

The Middle Atlantic CLH-ARD12 Adjustable Rung Drop with Spools is an adjustable rung designed with a drop down to work perfectly with any 12" wide cable management ladder.

The CLH-ARD12 12” wide cable ladder rung kit can be combined with new or pre-existing ladder and structural elements and it is compatible with many major brands of networking and installation accessories. Different lengths and widths are available from Middle Atlantic, as well as bends, corners, and sections with adjustable rungs. All ladder sections and accessories can be mixed and matched for the perfect configuration.

Under the Wire

Cable ladders are a type of cable tray, especially valued over conduit in installations where future changes or upgrades are anticipated. Rather than navigating new wires through a pipe, cables can simply be laid down and left in place. This cable ladder system is sold in pieces to allow for easy shipping, maneuvering, and complete customization. The Middle Atlantic CL Series CLB-VO90 is a vertical outside bent section of cable ladder, available in widths of 12, 18, and 24 inches.

The Highest Rung

Constructed of heavy duty 1.5” wide structural steel and covered in a dual-layer of sturdy black powder coat, the CLB-VO90 is built to last through installation and decades of use. They are UL listed and rated for a weight limit of 187lbs per foot. The open arrangement also allows easy access for routine maintenance, cleaning, and troubleshooting. Middle Atlantic’s legacy is one of quality and professionalism, and these cable ladders come with the assurance of a lifetime limited warranty against any manufacturer defects.

The CLB-VO90 90 degree cable ladder can be combined with new or pre-existing ladder and structural elements and it is compatible with many major brands of networking and installation accessories. Different lengths and widths are available from Middle Atlantic, as well as bends, corners, and sections with adjustable rungs. All ladder sections and accessories can be mixed and matched for the perfect configuration.

The Middle Atlantic Horizontal Lacer Bars are a simple and econonomical solution to providing effective cable management in your rack or enclosure. The horizontal lacer bars has a 19" width, ands fits neatly into most racking. When running patch cables throughout your rack, the Middle Atlantic lacer bars become invaluable.

The Middle Atlantic Horizontal Lacer Bars are a simple and econonomical solution to providing effective cable management in your rack or enclosure. The horizontal lacer bars has a 19" width, ands fits neatly into most racking. When running patch cables throughout your rack, the Middle Atlantic lacer bars become invaluable.

The Middle Atlantic Vertical Lacer Strips are a simple and economical solution to providing effective cable management on your rack or enclosure. The Middle Atlantic Vertical Lacer Strips with Round Holes gives you the ability to fasten your bundled cables straight through accommodating three sizes of cable ties with rivets.
The 2"W Lacer Strips with Round Holes are also available in 13 rack units and 45 rack units.

The Vertical Cable Management mounts between standard 7' equipment racks to provide neat and orderly routing of cables and jumpers. Each Vertical Cable Management consists of two covers, front and rear. The fingers in the channel are spaced to provide easy entrance and exit of cables while still maintaining control of the twisted pairs cable bend radii.