Klein Tools ET250 AC/DC Voltage/Continuity Tester
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- AC/DC Voltage/Continuity Tester
- Automatically selects voltage or continuity; automatically powers on when any measurement is attempted
- Backlit LCD display
- CAT IV 600V modern solid-state design for safety
- Tests GFCI protected circuits
- Uses standard replaceable multimeter test leads
- Features built-in test lead holders on back of meter
- Integrated flashlight
- 9.8 ft. (3 m) drop protection
- IP53 dust and water resistant
- Specs+
- Application: Measure Voltage and Continuity and Ensure GFCI Devices are Functioning Properly
- Batteries: 3 x AAA
- Control Type: Digital
- Display: Digital LCD
- Drop Protection: 9-27/32 ft (3m)
- Included: Test Leads, Batteries
- Ingress Protection: IP53 (except test lead jacks)
- Integral Lead Storage: Yes
- Material: Thermoplastic; Electronics
- Overall Height: 1.64" (41.7 mm)
- Overall Length: 6.06" (154.0 mm)
- Overall Width: 2.31" (58.8 mm)
- Pollution Degree: 2
- Special Features: Built-in Test Lead Holder and Integrated Flashlight
- Standard: CAT IV 600V, CE
- Style_Name: AC/DC Voltage & Continuity
- Tests Continuity: Yes
- Type: Digital Voltage and Continuity Tester
- Voltage: 2 to 600V AC/DC
- Weight: 6.00 oz (170.0 g)
- Reviews+
- AC/DC Voltage/Continuity Tester
- Automatically selects voltage or continuity; automatically powers on when any measurement is attempted
- Backlit LCD display
- CAT IV 600V modern solid-state design for safety
- Tests GFCI protected circuits
- Uses standard replaceable multimeter test leads
- Features built-in test lead holders on back of meter
- Integrated flashlight
- 9.8 ft. (3 m) drop protection
- IP53 dust and water resistant
- Application: Measure Voltage and Continuity and Ensure GFCI Devices are Functioning Properly
- Batteries: 3 x AAA
- Control Type: Digital
- Display: Digital LCD
- Drop Protection: 9-27/32 ft (3m)
- Included: Test Leads, Batteries
- Ingress Protection: IP53 (except test lead jacks)
- Integral Lead Storage: Yes
- Material: Thermoplastic; Electronics
- Overall Height: 1.64" (41.7 mm)
- Overall Length: 6.06" (154.0 mm)
- Overall Width: 2.31" (58.8 mm)
- Pollution Degree: 2
- Special Features: Built-in Test Lead Holder and Integrated Flashlight
- Standard: CAT IV 600V, CE
- Style_Name: AC/DC Voltage & Continuity
- Tests Continuity: Yes
- Type: Digital Voltage and Continuity Tester
- Voltage: 2 to 600V AC/DC
- Weight: 6.00 oz (170.0 g)
AC/DC Voltage/Continuity Tester
Klein Tools ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. The tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions.
AC/DC Voltage/Continuity Tester
Klein Tools ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. The tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions.