Evolution HDMI® over Single Coax Extender w/IR, 1080p, 396ft/120m
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Allows HDMI audio/video signals to be transmitted using a single coaxial cable
- Wide band Bi-directional IR system (20KHz to 60KHz) allowing for control of source or display
- Transmission Range: Extends 1080p resolution up to 394ft/120m over RG6 coaxial cable (dual and quad-shielded); Extends 1080p resolution up to 164ft/50m over RG59 coaxial cable
- Works with HDMI and HDCP compliant devices
- Supports up to 1080p/60 High Definition resolution
- Supports video resolutions 480i- 576i- 720p- 1080i- and 1080p
- 7.1-channel audio supported; Supports DTS-HD and Dolby TrueHD high bit rate audio
- EDID manual select control – Supports Copy EDID
- Compact and wall mounting housing design for easy and robust installation
- Fully compatible with any Evolution by Vanco product
- Dimensions: 3.35” (85mm) W x 1.1” (28mm) H x 3.19” (81mm) D
- Specs+
- Package Contents+
- EVEX2004 (TX & RX)
- IR Blaster (TX)
- IR Receiver (RX)
- (2) DC 5V power supplies
- Mounting hardware
- Product Manual
- Reviews+
- Allows HDMI audio/video signals to be transmitted using a single coaxial cable
- Wide band Bi-directional IR system (20KHz to 60KHz) allowing for control of source or display
- Transmission Range: Extends 1080p resolution up to 394ft/120m over RG6 coaxial cable (dual and quad-shielded); Extends 1080p resolution up to 164ft/50m over RG59 coaxial cable
- Works with HDMI and HDCP compliant devices
- Supports up to 1080p/60 High Definition resolution
- Supports video resolutions 480i- 576i- 720p- 1080i- and 1080p
- 7.1-channel audio supported; Supports DTS-HD and Dolby TrueHD high bit rate audio
- EDID manual select control – Supports Copy EDID
- Compact and wall mounting housing design for easy and robust installation
- Fully compatible with any Evolution by Vanco product
- Dimensions: 3.35” (85mm) W x 1.1” (28mm) H x 3.19” (81mm) D
- EVEX2004 (TX & RX)
- IR Blaster (TX)
- IR Receiver (RX)
- (2) DC 5V power supplies
- Mounting hardware
- Product Manual
Evolution HDMI Over Single Coax Extender With IR
The Evolution by Vanco EVEX2004 HDMI Extender over Single Coax with Bi-directional IR extends high-definition video and audio signals and IR, at a distance of up to 394ft/120m over RG6 coaxial cable, and 164ft/50m over RG59 coaxial cable. Features Bi-directional IR, which allows for control of the source or display. Also features EDID management, which allows and encourages source and display “handshake” for seamless integration. With just a single coaxial cable, high-definition sources with HDMI outputs can be connected to high-definition displays with HDMI inputs over long distances. DTS-HD or Dolby TrueHD audio, and HDCP are supported and compatible with the EVEX2004. Compact design with mounting ears included, for an easy and flexible installation. A great solution for applications that already have an existing coaxial cable in place.
The EVEX2004 includes two units: the transmitting unit (EVEX2004-TX) and receiving unit (EVEX2004- RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one coaxial cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. The EVEX2004 offers the most convenient solution for HDMI extension over a single coaxial cable with long-distance capability and provides a solution in applications where additional cables cannot be installed.
Evolution HDMI Over Single Coax Extender With IR
The Evolution by Vanco EVEX2004 HDMI Extender over Single Coax with Bi-directional IR extends high-definition video and audio signals and IR, at a distance of up to 394ft/120m over RG6 coaxial cable, and 164ft/50m over RG59 coaxial cable. Features Bi-directional IR, which allows for control of the source or display. Also features EDID management, which allows and encourages source and display “handshake” for seamless integration. With just a single coaxial cable, high-definition sources with HDMI outputs can be connected to high-definition displays with HDMI inputs over long distances. DTS-HD or Dolby TrueHD audio, and HDCP are supported and compatible with the EVEX2004. Compact design with mounting ears included, for an easy and flexible installation. A great solution for applications that already have an existing coaxial cable in place.
The EVEX2004 includes two units: the transmitting unit (EVEX2004-TX) and receiving unit (EVEX2004- RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one coaxial cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. The EVEX2004 offers the most convenient solution for HDMI extension over a single coaxial cable with long-distance capability and provides a solution in applications where additional cables cannot be installed.